scholarly journals Push-out bond strength of glass fiber posts luted with two resin cements

2017 ◽  
Vol 20 (4) ◽  
pp. 78
Author(s):  
Blanca Liliana Torres Léon ◽  
Vitor Lopes Franco ◽  
Emily Vivianne Freitas Silva ◽  
Leonardo Muniz ◽  
Fernando Carneiro Ribeiro
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Resin Cements ◽  
Anterior Teeth ◽  
Fiber Posts ◽  
Post And Core Technique ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Push Out

<p class="CorpoA"><strong>Objective.</strong> To evaluate the bond strength of a prefabricated glass fiber post to the root dentin with two resin cements using the push-out test. <strong>Material and Methods.</strong> Thirty fiber posts (White Post ECD) were cemented in human endodontically treated anterior teeth with two resin cements (n=15): Relyx<sup>TM </sup>ARC and AllCem. The roots were transversely sectioned and divided in cervical, middle and apical thirds after 48 h of cementation. The specimens' retention was tested by push-out method. The results were analyzed by 2-way ANOVA and Tukey’s test (<em>p</em>&lt;0.05). <strong>Results.</strong> There were no significant differences in the bond strength between the resin cements. The bond strength was higher in cervical third than in middle and apical thirds for both resin cements. It was observed higher percentages of adhesive failures followed by mixed. <strong>Conclusions.</strong> Both resin cements are indicated in the cementation of glass fiber post.</p><p class="CorpoA"><strong>Keywords</strong></p><p class="CorpoA">Dental prosthesis; Post and core technique; Biomechanical phenomena.</p>

CAD/CAM Milled Glass Fiber Posts: Adaptation and Mechanical Behavior in Flared Root Canals

2021 ◽  
Author(s):  
MER Gama ◽  
GS Balbinot ◽  
GC Ferreira ◽  
EG Mota ◽  
VCB Leitune ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Root Canals ◽  
Fiber Posts ◽  
Cad Cam ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Post And Core ◽  
Push Out

SUMMARY This study aimed to evaluate the cementation and mechanical behavior of flared root canals restored with CAD/CAM milled glass fiber post-and-core systems. Sixty-six endodontically treated human canines with a flared root canal were divided into three different groups according to the type of post: GPF received prefabricated posts; GREL received relined glass fiber posts, and GMILLED received CAD/CAM milled glass fiber posts. Cementation was performed with self-adhesive resin cement. The samples were submitted to x-ray microcomputed tomography analysis for the analysis of voids and gaps. The roots were sectioned and submitted to the push-out bond strength test. The load-to-fracture was evaluated in post-and-core systems. GMILLED presented lower void and lower gap volumes when compared to GPF and GREL. On the load-to-fracture test, GREL presented statistically significant higher values than GMILLED. GPF values had no statistically significant difference from the two other groups. On the push-out bond strength test, GPF presented statistically significant lower values when compared to GREL and GMILLED. The most common failure pattern was between dentin and cement in all groups. CAD/CAM milled glass fiber post-and-core systems presented an enhanced adaptation of glass fiber posts to flared root canal systems. Their results were comparable to relined posts in bond strength, while load-to-fracture-results for GMILLED were lower than those for GPF.

scholarly journals Bond strength of glass fiber posts submitted to different luting protocols

2016 ◽  
Vol 31 (2) ◽  
pp. 77
Author(s):  
Fabiano Vieira De Landa ◽  
Jean Soares Miranda ◽  
Rodrigo Furtado De Carvalho ◽  
Estevão Tomomitsu Kimpara ◽  
Fabíola Pessôa Pereira Leite
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Testing Machine ◽  
Dentinal Tubules ◽  
Fiber Posts ◽  
Cutting Machine ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Root Dentin ◽  
Push Out

Objective: evaluate the effect of different luting protocols on the bond strength of glass fiber posts.Methods: Forty human canine teeth were randomly divided into four groups: Relyx U100/Endofill (R+E), Panavia F2.0/EndoFill (P+E), Relyx U100/Sealer 26 (R+S), Panavia F2.0/Sealer 26 (P+S). After the luting procedures, the samples were subjected to thermocycling (6.000 cycles; at 5±1 ºC and 55±1 ºC) and then sectioned in a precision cutting machine (Isomet 1000 Precision Saw) into 4 cuts of 2mm regarding to different deepness: Apical, Medium Apical, Medium Coronal, and Coronal. Next, the cuts were submitted to push-out test in a universal testing machine (EMIC) with load cell of 50N, at crosshead speed of 0.5mm/min.Results: They were obtained according to the different luting deepness (p≥0.05) (MPa): 1) apical – R+E (1.35±1.28), P+E (2.70±0.89), R+S (3.89±0.70), P+S (4.30±1.02); 2) medium apical – R+E (1.38±1.28), P+E (2.98±1.43), R+S (4.02±1.14), P+S (4.49±1.82); 3) medium coronal – R+E (2.46±0.73), P+E (3.72±0.78), R+S (4.85±0.71), P+S (6.14±0.73); 4) coronal R+E (5.59±1.08), P+E (5.74±1.06), R+S (6.71±1.07), P+S (7.40±1.51).Conclusion: There was a relationship between the luting protocol of the glass fiber post and the endodontic cement. Eugenol plays an important role inside the dentinal tubules by interfering negatively in the bond strength to root dentin.

scholarly journals Effect of Anatomical Customization of the Fiber Post on the Bond Strength of a Self-Adhesive Resin Cement

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Adricyla Teixeira Rocha ◽  
Leticia Machado Gonçalves ◽  
Ana Júlia de Carvalho Vasconcelos ◽  
Etevaldo Matos Maia Filho ◽  
Ceci Nunes Carvalho ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Cement ◽  
Control Group ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Push Out

Aim. The aim of the study was to evaluate, by means of the push-out test, the effect of the anatomical customization of the fiber post on the bond strength of a self-adhesive resin cement. Methods. Twelve endodontically treated, human, upper central incisors were randomly divided into two groups (n=6): control (glass fiber posts cemented with Relyx® U200) and customized (glass fiber posts anatomically customized with translucent composite resin cemented with Relyx U200). The roots were sectioned into three slices, cervical, middle, and apical, and photographed with a digital camera attached to a stereomicroscopic loupe. The images were analyzed by software, for evaluation of the cement line. The slices were subsequently submitted to the push-out test until the post had completely extruded, and the fracture mode was analyzed with a stereomicroscopic loupe. Results. The results showed significant differences between the groups in the different root thirds in relation to the area occupied by air bubbles (p<0.05). Bond strength, when all the thirds are considered, was 8.77 ± 4.89 MPa for the control group and 16.96 ± 4.85 MPa for the customized group. Conclusion. The customized group showed greater bond resistance than the control group and a more uniform cement layer.

scholarly journals Effect of Different Resin Cements on the Bond Strength of Custom-made Reinforced Glass Fiber Posts—A Push-out Study

2021 ◽  
Vol 22 (3) ◽  
pp. 219-223
Author(s):  
Patrícia MC Soares ◽  
Luis FSA Morgan ◽  
Stéphanie Q Tonelli ◽  
Francisco IR Limeira ◽  
Fábio FB Bruzinga ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Cements ◽  
Fiber Posts ◽  
Custom Made ◽  
Glass Fiber Posts ◽  
Push Out

scholarly journals Effect of Sonic Application of Self-Adhesive Resin Cements on Push-Out Bond Strength of Glass Fiber Posts to Root Dentin

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1930
Author(s):  
Darlon Martins Lima ◽  
Thátyla Silva Linhares ◽  
Suellen Nogueira Linares Lima ◽  
Edilausson Moreno Carvalho ◽  
Alessandro Dourado Loguercio ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fracture Pattern ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Luting Cement ◽  
Glass Fiber Posts ◽  
Root Dentin ◽  
Push Out

The aim of this study was to evaluate the influence of a sonic application of self-adhesive resin cements on the bond strength of glass fiber posts to root dentin. Eighty bovine incisors were randomly divided into eight groups (n = 10). Four self-adhesive resin cements were used—RelyX U200 (3M/ESPE), Bifix SE (Voco), seT PP (SDI), and Panavia SA (Kuraray). The cements were inserted into the root canal in two different modes—Centrix syringe (control) or with a sonic device (Sonic Smart). The roots were sectioned and taken to a universal test machine (Instron 3342) to perform the push-out test. The fracture pattern was evaluated by stereomicroscope and scanning electron microscope. The bond strength data were analyzed by two-way ANOVA and Tukey tests (α = 0.05). The interaction between the main factors was significant (p = 0.002). The sonic application increased the bond strength in comparison with the conventional application for the RelyX U200 (p < 0.001) and Bifix SE (p < 0.017) cements. However, for the seT PP and Panavia SA cements, the bond strength values did not differ significantly (p > 0.05). The fracture pattern showed adhesive at the interface between the luting cement and the dentin. Using a sonic device in the application of self-adhesive resin cement helpedpromote an increase in the bond strength for RelyX U200 and Bifix SE.

scholarly journals Fracture Resistance of Three Post Types in the Restoration of Anterior Primary Teeth

2020 ◽  
Vol 14 (1) ◽  
pp. 375-383
Author(s):  
Fatemeh Kadkhodaei ◽  
Majid Mehran ◽  
Roza Haghgoo ◽  
Mehrshad Zareiyan
Keyword(s):  
Glass Fiber ◽  
Fracture Resistance ◽  
Primary Teeth ◽  
Composite Resin ◽  
Pediatric Dentistry ◽  
Fiber Post ◽  
Anterior Teeth ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Glass Fiber Post

Background: Extensive restorative treatments of anterior primary teeth are challenging in pediatric dentistry. Objective: This study aimed to compare the fracture resistance of three post types for restoring the anterior primary teeth. Methods: This in-vitro study was carried out on 90 extracted maxillary anterior primary teeth with intact roots. They were randomly allocated into six groups to be restored with conventional composite resin post, X-tra fill composite resin post, Tetric N Ceram composite resin post, prefabricated glass fiber post with conventional composite build-up, prefabricated glass fiber post with X-tra fill composite build-up, and prefabricated glass fiber post with Tetric N Ceram composite build up. The samples were polished and placed in acrylic resin blocks with 1 mm of part of cervical root being out, thermocycled (×5000) and tested for fracture resistance. Intra-class correlation test, Kruskal-Wallis test and one-way ANOVA were used for statistical analyses (α=0.05). Results: The mean fracture resistance was significantly different among the six groups. It was the highest in prefabricated glass fiber post with conventional composite build-up (418.64 N), prefabricated glass fiber post with X-tra fill composite build-up (403.63 N) and prefabricated glass fiber post with Tetric N Ceram composite build up (361.63 N); and the lowest in Tetric N Ceram group (280.65 N). The groups were significantly different concerning the fracture strength and fracture state. Conclusion: Since the anterior teeth restored with prefabricated glass fiber posts were far more fracture resistant, and prefabricated glass fiber posts can be promisingly used for the restoration of anterior primary teeth.

scholarly journals EVALUATION OF PUSH-OUT BOND STRENGTH BETWEEN DIFFERENT SURFACE TREATED GLASS FIBER POSTS AND COMPOSITE

2019 ◽  
Vol 8 (4) ◽  
Author(s):  
Dr. Sundaresan Balagopal ◽  
Dr. Vandana James ◽  
Dr.M. Anisha Sebatni ◽  
Dr.Ramasamy Saravanan Gayathri ◽  
Dr.Bahavathi Ananthan Hemasathya ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Coupling Agent ◽  
Silane Coupling Agent ◽  
Bonding Agent ◽  
Fiber Post ◽  
Silane Coupling ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Push Out

Aim: To evaluate the effect of push-out bond strength between different surface treated glass fiber posts and resin composite. Materials and Methods: Four Cylindrical Glass fiber post (GFP) of 1.3mm diameter were divided into four groups depending on the surface treatment of glass GFP. Group I– no surface treatment done for GFP, group II - silane coupling agent was applied to GFP, then coated with bonding agent, group III – GFP was etched with 37% phosphoric acid, then treated with silane coupling agent and later coated with bonding agent and group IV - GFP was etched with 5% hydrofluoric acid then treated with silane coupling agent and later coated with bonding agent. The surface treated posts were vertically stabilized in the centre of a matrix. Composite was filled circumferentially and incrementally and photo cured. It was then sectioned perpendicular to the vertical axis yielding ten 1.0mm thick discs per fiber post. Ten specimens per group were obtained. They were subjected to push-out bond strength using universal testing machine. One - way analysis of variance and Tukey’s test were performed to verify statistical differences between groups (P< 0.01). Results: Superior bond strength was seen in 5% hydrofluoric acid etched group. Etching with 37% phosphoric acid or silane coupling agent alone did not show significant difference. GFP without surface treatment showed least bond strength. Conclusion: Glass fiber posts should be etched with 5% hydrofluoric acid and treated with silane coupling agent before applying bonding agent for a better bond strength between composite and the GFP. Keywords: Glass fiber post, push-out bond strength, custom made glass fiber post.

scholarly journals Effect of surface treatments on push-out bond strength of calcium silicate-based cements to fiber posts

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Amr M. Elnaghy ◽  
Ayman Mandorah ◽  
Ali H. Hassan ◽  
Alaa Elshazli ◽  
Shaymaa Elsaka
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Glass Fiber ◽  
Calcium Silicate ◽  
Surface Treatments ◽  
The Other ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Push Out ◽  
Effect Of Surface

Abstract Background To evaluate the effect of surface treatments on the push-out bond strength of Biodentine (BD) and white mineral trioxide aggregate (WMTA) to fiber posts. Methods Two brands of fiber posts were used: Reblida post; RP and RelyX post; RX. Each type of post (n = 80/group) was divided into four groups (n = 20/group) and exposed to surface treatment as follows: Control (no treatment), sandblasting (SB), hydrofluoric acid (HF), and TiF4 4 wt/v%. Each group was further subdivided into two subgroups (n = 10/subgroup) based on the type of CSCs used as follows: Subgroup A: BD and Subgroup B: WMTA. Push-out bond strength of BD and WMTA to glass fiber posts was assessed. Data were statistically analyzed using three-way ANOVA and Tukey’s test. A Weibull analysis was performed on the push-out bond strength data. Results BD showed higher bond strength than WMTA (P < 0.001). The push-out bond strength for posts treated with TiF4 4 wt/v% showed greater bond strength than the other surface treatments (P < 0.05). The BD/RP-TiF4 4 wt/v% showed the greater characteristic bond strength (σ0) (15.93) compared with the other groups. Surface treatments modified the surface topography of glass fiber posts. Conclusions The BD/RP-TiF4 4 wt/v% showed greater bond strength compared with the other groups. The TiF4 4 wt/v% surface treatment enhanced the bond strength of BD and WMTA to glass fiber posts than the other treatments. Surface treatment of fiber post with TiF4 4 wt/v% could be used to improve the bond strength with calcium silicate-based cements.

Push out bond strength of glass fiber post to radicular dentin irrigated with Nisin and MTAD compared methylene blue photosensitizer activated by photodynamic therapy

2021 ◽  
pp. 102304
Author(s):  
Abdullah S. Aljamhan ◽  
Mohammad H. Alrefeai ◽  
Alhanouf Alhabdan ◽  
Fahad Alkhudhairy ◽  
Eisha Abrar ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photodynamic Therapy ◽  
Bond Strength ◽  
Glass Fiber ◽  
Fiber Post ◽  
Glass Fiber Post ◽  
Push Out

scholarly journals Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post

2018 ◽  
Vol 29 (1) ◽  
pp. 93-98 ◽  
Author(s):  
Tânia Mara da Silva ◽  
Virgílio Vilas Boas Fernandes Junior ◽  
Rosemary Soares de Santana ◽  
Renata Marques de Melo Marinho ◽  
Márcia Carneiro Valera ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Zingiber Officinale ◽  
Resin Cement ◽  
Fiber Post ◽  
Ginger Extract ◽  
Etch And Rinse ◽  
Glass Fiber Post ◽  
Push Out

Abstract The aim of this study was to evaluate in vitro the influence of 20% glycolic ginger extract on the bond strength of glass-fiber post cemented with etch-and-rinse or self-etching resin cement. Forty-eight bovine roots were standardized (17±0.5 mm) and randomly divided into two groups, according to irrigant used during biomechanical preparation: NaOCl: 1% sodium hypochlorite and GEN: 20% glycolic ginger extract. Root canal was prepared and randomly assigned to one of two subgroups (n=12), according to luting protocol: self-etching (RelyX U200) and etch-and-rinse (RelyX ARC). After 48 h, the roots were sectioned perpendicularly (4 in cervical third and 3 in middle third) and submitted to push-out bond strength test (50 kgf load cell, 1.0 mm/min). Failure mode was analyzed in SEM and stereomicroscopy. Data were analyzed by three-way ANOVA and Tukey tests (p<0.05). ANOVA revealed that there were no significant differences between U200 (2.01±0.17)B and ARC (1.93±0.12)B in GEN group, and at the cervical third for both irrigants, 2.69±0.16A and 2.54±0.17A, respectively. Middle third showed lower bond strength than cervical third, regardless the irrigant. Overall, the cervical third regardless the irrigant employed and the association between NaOCl and ARC, presented better adhesive performance.

Sign in / Sign up

Export Citation Format

Share Document