scholarly journals Depositional Environment and facies analysis of Useni- 1, Niger Delta Basin, using well logs, core data

2019 ◽  
Vol 7 (1) ◽  
pp. 58
Author(s):  
G. O. Aigbadon ◽  
E. O. Akpunonu ◽  
S. O. Agunloye ◽  
A. Ocheli ◽  
O. O .Akakaru
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
Depth Range ◽  
Depositional Facies ◽  
Core Data ◽  
Delta Plain ◽  
Niger Delta Basin ◽  
Gamma Ray Log

This study was carried out integrating well logs and core to build reservoir model for the Useni-1 oil field. Core data and well logs were used to evaluate the petrophysical characteristics of the reservoirs. The paleodepositional environment was deduce from the wells and cores data. The depositional facies model showed highly permeable channels where the wells where positioned. The environments identified that the fluvial channel facies with highly permeable zones constituted the reservoirs. Four reservoirs were mapped at depth range of 8000ft to 8400ft with thicknesses varying from 20ft to 400ft. Petrophysical results showed that porosity of the reservoirs varied from 12% to 28 %; permeability from 145.70 md to 454.70md; water saturation from 21.65% to 54.50% and hydrocarbon saturation from 45.50% to 78.50 %. Core data and the gamma ray log trends with right boxcar trend indicate fluvial point bar and tidal channel fills in the lower delta plain setting. By-passed hydrocarbons were identified in low resistivity pay sands D1, D2 at depth of 7800 – 78100ft in the field.  

scholarly journals Depositional Environments and Reservoir Evaluation of Otuma Oil Field, Niger - Delta basin, Nigeria

2021 ◽  
Vol 2 (6) ◽  
pp. 53-57
Author(s):  
Godwin O. Aigbadon ◽  
Goriola O. Babatunde ◽  
Mu’awiya B. Aminu ◽  
Changde A. Nanfa ◽  
Simon D. Christopher
Keyword(s):  
Niger Delta ◽  
Water Saturation ◽  
Depositional Environments ◽  
Oil Field ◽  
Well Logs ◽  
Depth Range ◽  
Motif Model ◽  
Reservoir Evaluation ◽  
Study Interval ◽  
Niger Delta Basin

This study was carried out by using well logs to evaluate the depositional environments and hydrocarbon reservoirs in the Otuma oil field, Niger Delta basin. The gamma motif/model within- study interval in the drilled well shows blocky, symmetrical, and serrated shapes which suggest a deltaic front with mouth bar to a regressive - transgressive shoreface delta respectively. A correlation was done on the well logs across the wells and the ten well logs were used to evaluate the petrophysical characteristics of the reservoirs. The reservoirs showed highly porous and permeable channels where the wells were used for the characterization. The ten reservoirs were mapped at a depth range of 2395 m to 2919 m with thicknesses varying from 4m to 135m. The petrophysical results of the field showed that the porosity of the reservoirs ranges between 0.10 to 0.30, and permeability from 48 md to 290 md; the water saturation ranges from 0.39 to 0.52, and hydrocarbon saturation from the field 0.48 to 0.61. The By-passed hydrocarbons identified in low resistivity pay sands D4 and D3 at depth 2649 m to 2919 m, respectively were also evaluated and will be put to production in the field.

scholarly journals Petrophysical Properties and Digenetic Evolution of Shuaiba Formation in Nasiriyah Oil Field, Southern Iraq

2021 ◽  
pp. 4810-4818
Author(s):  
Marwah H. Khudhair
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Middle Part ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Petrophysical Properties ◽  
Secondary Porosity ◽  
Primary Porosity ◽  
Gamma Ray Log

     Shuaiba Formation is a carbonate succession deposited within Aptian Sequences. This research deals with the petrophysical and reservoir characterizations characteristics of the interval of interest in five wells of the Nasiriyah oil field. The petrophysical properties were determined by using different types of well logs, such as electric logs (LLS, LLD, MFSL), porosity logs (neutron, density, sonic), as well as gamma ray log. The studied sequence was mostly affected by dolomitization, which changed the lithology of the formation to dolostone and enhanced the secondary porosity that replaced the primary porosity. Depending on gamma ray log response and the shale volume, the formation is classified into three zones. These zones are A, B, and C, each can be split into three rock intervals in respect to the bulk porosity measurements. The resulted porosity intervals are: (I) High to medium effective porosity, (II) High to medium inactive porosity, and (III) Low or non-porosity intervals. In relevance to porosity, resistivity, and water saturation points of view, there are two main reservoir horizon intervals within Shuaiba Formation. Both horizons appear in the middle part of the formation, being located within the wells Ns-1, 2, and 3. These intervals are attributed to high to medium effective porosity, low shale content, and high values of the deep resistivity logs. The second horizon appears clearly in Ns-2 well only.

scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

scholarly journals Depositional facies model and reservoir characterization of USANI field 1, Niger delta basin, Nigeria

2017 ◽  
Vol 5 (2) ◽  
pp. 57 ◽  
Author(s):  
Godwin Aigbadon ◽  
A.U Okoro ◽  
Chuku Una ◽  
Ocheli Azuka
Keyword(s):  
Tidal Flat ◽  
Water Saturation ◽  
Well Logs ◽  
Physical Analysis ◽  
Well Log ◽  
Delta Front ◽  
Depositional Facies ◽  
Facies Model ◽  
Core Data ◽  
The Core

The 3-D depositional environment was built using seismic data. The depositional facies was used to locate channels with highly theif zones and distribution of various sedimentary facies. The integration core data and the gamma ray log trend from the wells within the studied interval with right boxcar/right bow-shape indicate muddy tidal flat to mixed tidal flat environments. The bell–shaped from the well logs with the core data indicate delta front with mouth bar, the blocky box- car trend from the well logs with the core data indicate tidal point bar with tidal channel fill. The integration of seismic to well log tie display a good tie in the wells across the field. The attribute map from velocity analysis revealed the presence of hydrocarbons in the identified sands (A, B, C, D1, D2, D4, D5). The major faults F1, F2, F3 and F4 with good sealing capacity are responsible for hydrocarbon accumulation in the field. Detailed petro physical analysis of well log data showed that the studied interval are characterized by sand-shale inter-beds. Eight reservoirs were mapped at depth intervals of 2886m to 3533m with their thicknesses ranging from 12m to 407m. Also the Analysis of the petrophysical results showed that porosity of the reservoirs range from 14% to 28 %; permeability range from 245.70 md to 454.7md; water saturation values from 21.65% to 54.50% and hydrocarbon saturation values from 45.50% to 78.50 %. The by-passed hydrocarbons were identified and estimated in low resistivity pay sands D1, D2 at depth of 2884m – 2940m, sand D5 at depth of 3114m – 3126m respectively. The model serve as a basis for establishing facies model in the field.

scholarly journals Petrophysical Analysis of Well Logs for Asmari Reservoir in Abu Ghirab Oil Field, South Eastern Iraq

2020 ◽  
pp. 2979-2990
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Computer Processing ◽  
Oil Field ◽  
Well Logs ◽  
Asmari Formation ◽  
Petrophysical Properties ◽  
Resistivity Logs ◽  
Environmental Corrections

The present study includes the evaluation of petrophysical properties and lithological examination in two wells of Asmari Formation in Abu Ghirab oil field (AG-32 and AG-36), Missan governorate, southeastern Iraq. The petrophysical assessment was performed utilizing well logs information to characterize Asmari Formation. The well logs available, such as sonic, density, neutron, gamma ray, SP, and resistivity logs, were converted into computerized data using Neuralog programming. Using Interactive petrophysics software, the environmental corrections and reservoir parameters such as porosity, water saturation, hydrocarbon saturation, volume of bulk water, etc. were analyzed and interpreted. Lithological, mineralogical, and matrix recognition studies were performed using porosity combination cross plots. Petrophysical characteristics were determined and plotted as computer processing interpretation (CPI) using Interactive Petrophysics program. Based on petrophysical properties, Asmari Reservoir in Abu Ghirab oil field is classified into three sub formations: Jeribe/ Euphrates and Kirkuk group which is divided into two zones: upper Kirkuk zone, and Middle-Lower Kirkuk zone. Interpretation of well logs of Asmari Formation indicated a commercial Asmari Formation production with medium oil evidence in some ranges of the formation, especially in the upper Kirkuk zone at well X-1. However, well X-2, especially in the lower part of Jeribe/ Euphrates and Middle-Lower Kirkuk zone indicated low to medium oil evidence. Lithology of Asmari Formation demonstrated a range from massive dolomite in Jeribe/ Euphrates zone to limestone in upper Kirkuk zone and limestone and sandstone in middle-lower Kirkuk zone, whereas mineralogy of the reservoir showed calcite and dolomite with few amounts of anhydrite.

scholarly journals Evaluation of Petrophysical Properties Using Well Logs of Yamama Formation in Abu Amood Oil Field, Southern Iraq

2021 ◽  
Vol 54 (1E) ◽  
pp. 67-77
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Well Logs ◽  
Water Volume ◽  
High Porosity ◽  
Petrophysical Properties ◽  
Reservoir Properties

The petrophysical analysis is very important to understand the factors controlling the reservoir quality and production wells. In the current study, the petrophysical evaluation was accomplished to hydrocarbon assessment based on well log data of four wells of Early Cretaceous carbonate reservoir Yamama Formation in Abu-Amood oil field in the southern part of Iraq. The available well logs such as sonic, density, neutron, gamma ray, SP, and resistivity logs for wells AAm-1, AAm-2, AAm-3, and AAm-5 were used to delineate the reservoir characteristics of the Yamama Formation. Lithologic and mineralogic studies were performed using porosity logs combination cross plots such as density vs. neutron cross plot and M-N mineralogy plot. These cross plots show that the Yamama Formation consists mainly of limestone and the essential mineral components are dominantly calcite with small amounts of dolomite. The petrophysical characteristics such as porosity, water and hydrocarbon saturation and bulk water volume were determined and interpreted using Techlog software to carried out and building the full computer processed interpretation for reservoir properties. Based on the petrophysical properties of studied wells, the Yamama Formation is divided into six units; (YB-1, YB-2, YB-3, YC-1, YC-2 and YC-3) separated by dense non porous units (Barrier beds). The units (YB-1, YB-2, YC-2 and YC-3) represent the most important reservoir units and oil-bearing zones because these reservoir units are characterized by good petrophysical properties due to high porosity and low to moderate water saturation. The other units are not reservoirs and not oil-bearing units due to low porosity and high-water saturation.

scholarly journals Lithological Study of Mishrif, Rumaila, Ahmadi and Mauddud Formations Using Vp/ Vs Ratio, Acoustic Impedance and Well Logging at Amara Oil Field, Southern Iraq

2021 ◽  
Vol 54 (2D) ◽  
pp. 39-58
Author(s):  
Hiba Tareq
Keyword(s):  
Acoustic Impedance ◽  
Gamma Ray ◽  
Water Saturation ◽  
Rock Physics ◽  
Shear Velocity ◽  
Oil Field ◽  
High Porosity ◽  
Shale Volume ◽  
Sonic Logs ◽  
Gamma Ray Log

The lithology of four formations from the Cretaceous period (Mishrif, Rumaila, Ahmadi, and Mauddud) was evaluated using the Acoustic Impedance and Vp/Vs ratio cross plot from Rock Physics Templates. Dipole sonic logs in Am-6-Am-10 well log were used to calculate compression velocity then the estimated shear velocity using Greenberg Castagna equations. RHOB and VP logs were used to calculate Acoustic Impedance. The ratio of Vp/Vs was measured then used with Acoustic Impedance colored by shale volume which is measured from gamma ray log, porosity and water saturation to estimate lithology type of the considered formations using cross plots and rock physics chart in the Techlog software. The lithology of the formations found to be of high porosity limestone alternating with hard limestone layers and the shale volume increases in the Ahmadi formation. The water bearing zone was found in all Formations, this zone is indicted by high Vp/ Vs ratio and low AI. The hydrocarbon bearing zones were indicated by low amount of both Acoustic Impedance and Vp/Vs ratio and this observation was shown in Mishrif and Mauddud formations.

Petrophysical Analysis of Well Logs for the Estimation of Oil Reserves in Southern Niger Delta

2018 ◽  
Vol 6 (1) ◽  
pp. 145
Author(s):  
Paul S S ◽  
Okwueze . ◽  
E E ◽  
Udo K I
Keyword(s):  
Niger Delta ◽  
Gamma Ray ◽  
Water Saturation ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Oil Reserves ◽  
Hydrocarbon Saturation ◽  
Resistivity Log ◽  
Gamma Ray Log ◽  
Sand Bodies

Gamma Ray log, Resistivity log, Density log, Micro-spherical focus log (MSFL), Deep Induction log (ILD) , Medium Induction log(ILM) and Spontaneous Potential (SP) log were collected for 2 wells in onshore Niger Delta. These insitu well logs were analyzed and interpreted. Porosity, permeability, water saturation, reservoir thickness and Shale volume were estimated for each hydrocarbon bearing zone delineated for each well. The parameters obtained were further analyzed and interpreted quantitatively to estimate the hydrocarbon potentials of each well. Twelve reservoir zones of interest (sand bodies) were delineated, correlated across the field and were ranked using average results of petrophysical parameters. In well one, Reservoirs E and F were identified as the thickest with 41ft each while reservoir A is the smallest in thickness (30ft). Petrophysical properties of hydrocarbon bearing zones delineated in well one ranged from 17.81% to 23.20% for porosity, 1292.09mD to 2018.17mD for permeability and 56.40% to 68.40% for hydrocarbon saturation compared to well 2 with 14.67% to 19.52% for porosity, 1211.61mD to1843.11mD for permeability and 51.80% to 66.40% for hydrocarbon saturation. The estimated averages of petrophysical properties for well one are 20.14% porosity, 1643.65mD permeability, 63.20% hydrocarbon saturation compared to well 2 with 15.55% porosity, 1582.58mD permeability and 61.93% hydrocarbon saturation. Results show 148.45MMBB and 145.91MMBB as oil reserve (Recoverable) for the field. From the results obtained, well one is likely to be more productive than well [2] and the field has exploitable oil in place.  

Evaluation of Reservoir’s Petrophysical Parameters, Niger Delta, Nigeria

2017 ◽  
Vol 5 (1) ◽  
pp. 19
Author(s):  
Ubong Essien ◽  
Akaninyene Akankpo ◽  
Okechukwu Agbasi
Keyword(s):  
Niger Delta ◽  
Gamma Ray ◽  
Water Saturation ◽  
Petrophysical Parameters ◽  
Niger Delta Region ◽  
Average Porosity ◽  
Irreducible Water Saturation ◽  
Open Hole ◽  
Bulk Volume ◽  
Niger Delta Basin

Petrophysical analysis was performed in two wells in the Niger Delta Region, Nigeria. This study is aimed at making available petrophysical data, basically water saturation calculation using cementation values of 2.0 for the reservoir formations of two wells in the Niger delta basin. A suite of geophysical open hole logs namely Gamma ray; Resistivity, Sonic, Caliper and Density were used to determine petrophysical parameters. The parameters determined are; volume of shale, porosity, water saturation, irreducible water saturation and bulk volume of water. The thickness of the reservoir varies between 127ft and 1620ft. Average porosity values vary between 0.061 and 0.600; generally decreasing with depth. The mean average computed values for the Petrophysical parameters for the reservoirs are: Bulk Volume of Water, 0.070 to 0.175; Apparent Water Resistivity, 0.239 to 7.969; Water Saturation, 0.229 to 0.749; Irreducible Water Saturation, 0.229 to 0.882 and Volume of Shale, 0.045 to 0.355. The findings will also enhance the proper characterization of the reservoir sands.

Petrophysical Type Curves for Identifying the Electrical Character of Petroleum Reservoirs

2007 ◽  
Vol 10 (06) ◽  
pp. 711-729 ◽  
Author(s):  
Paul Francis Worthington
Keyword(s):  
Water Saturation ◽  
Early Stage ◽  
Well Logs ◽  
Log Analysis ◽  
Well Log ◽  
Formation Water ◽  
Water Conductivity ◽  
Core Data ◽  
Water Saturated ◽  
Petrophysical Evaluation

Summary A user-friendly type chart has been constructed as an aid to the evaluation of water saturation from well logs. It provides a basis for the inter-reservoir comparison of electrical character in terms of adherence to, or departures from, Archie conditions in the presence of significant shaliness and/or low formation-water salinity. Therefore, it constitutes an analog facility. The deliverables include reservoir classification to guide well-log analysis, a protocol for optimizing the acquisition of special core data in support of log analysis, and reservoir characterization in terms of an (analog) porosity exponent and saturation exponent. The type chart describes a continuum of electrical behavior for both water and hydrocarbon zones. This is important because some reservoir rocks can conform to Archie conditions in the fully water-saturated state, but show pronounced departures from Archie conditions in the partially water-saturated state. In this respect, the chart is an extension of earlier approaches that were restricted to the water zone. This extension is achieved by adopting a generalized geometric factor—the ratio of water conductivity to formation conductivity—regardless of the degree of hydrocarbon saturation. The type chart relates a normalized form of this geometric factor to formation-water conductivity, a "shale" conductivity term, and (irreducible) water saturation. The chart has been validated using core data from comprehensively studied reservoirs. A workflow details the application of the type chart to core and/or log data. The analog role of the chart is illustrated for reservoir units that show different levels of non-Archie effects. The application of the method should take rock types, scale effects, the degree of core sampling, and net reservoir criteria into account. The principal benefit is a reduced uncertainty in the choice of a procedure for the petrophysical evaluation of water saturation, especially at an early stage in the appraisal/development process, when adequate characterizing data may not be available. Introduction One of the ever-present problems in petrophysics is how to carry out a meaningful evaluation of well logs in situations where characterizing information from quality-assured core analysis is either unavailable or is insufficient to satisfactorily support the log interpretation. This problem is especially pertinent at an early stage in the life of a field, when reservoir data are relatively sparse. Data shortfalls could be mitigated if there was a means of identifying petrophysical analogs of reservoir character, so that the broader experience of the hydrocarbon industry could be utilized in constructing reservoir models and thence be brought to bear on current appraisal and development decisions. Here, a principal requirement calls for type charts of petrophysical character, on which data from different reservoirs can be plotted and compared, as a basis for aligning approaches to future data acquisition and interpretation. This need manifests itself strongly in the petrophysical evaluation of water saturation, a process that traditionally uses the electrical properties of a reservoir rock to deliver key building blocks for an integrated reservoir model. The solution to this problem calls for an analog facility through which the electrical character of a subject reservoir can be compared with others that have been more comprehensively studied. In this way, the degree of confidence in log-derived water saturation might be reinforced. At the limit, the log analyst needs a reference basis for recourse to capillary pressure data in cases where the well-log evaluation of water saturation turns out to be prohibitively uncertain.

Sign in / Sign up

Export Citation Format

Share Document