scholarly journals Evaluation of the Reality of the Management and Treatment of Solid Waste in Al-Yarmouk Teaching Hospital

2018 ◽  
Vol 7 (4.20) ◽  
pp. 594
Author(s):  
Ghayda Yaseen AL Kindi ◽  
. .
Keyword(s):  
Moisture Content ◽  
Solid Waste ◽  
Teaching Hospital ◽  
Medical Waste ◽  
Generation Rate ◽  
Waste Generation ◽  
Factors Affecting ◽  
Number Of Patients ◽  
Surgical Operations ◽  
Medical Wastes

The aim of this study is to evaluate the reality of the management and treatment of solid waste in Al-Yarmouk teaching hospital, it’s observed that total generation rate of solid waste per day was 116.133 kg/day. while the rate of medical waste generation was 55.075 kg/day. More than 50% of this waste was generated in the surgery rooms and patients' rooms. As well as, it was found that the generation rate of waste for each bed per day was (0.87) kg, while it was (0.28 kg/bed.day) of medical solid waste. In addition, the medical wastes characteristics are studied by taking samples during 3 months of 2017, and analyzing them to determine their moisture content and density. The moisture content are observed between (1.7-30%, 40-56%) for medical and general waste respectively. While the density are (270.4 and 239), kg/m3 for medical and general waste respectively. In addition, the number of surgical operations and the number of patients per day are shown to be most important factors affecting the generation rate of medical waste in the hospital. The treatment of medical wastes for Al-Yarmouk Hospital adopts a system of steam sterilization in a special system.  

scholarly journals Face Mask Consumption and Medical Waste Generation During the COVID-19 Pandemic in Iran: Challenges and Problems

2021 ◽  
Vol 7 (3) ◽  
Author(s):  
Hooshyar Hossini ◽  
Sheida Atashkar ◽  
Tooraj Massahi
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Consumption Rate ◽  
Face Mask ◽  
Medical Waste ◽  
Generation Rate ◽  
Current Status ◽  
Waste Generation ◽  
Continuous Increase ◽  
Waste Generation Rate

Background: The outbreak of COVID-19 has caused a devastating pandemic scenario in the world. The mortality rate has increased and new socio-economic challenges are emerging. Millions of gloves, gowns, face masks, and face shields are used daily to prevent airborne transmission and facilitate the treatment of COVID-19. Mismanagement of these wastes can lead to increased concerns due to their contamination potential. A comprehensive plan to improve the management of medical wastes in every country requires awareness of the current status of solid waste. As a result, the study aimed to calculate and estimate the consumption rate of face masks and medical waste generation rate during the COVID-19 pandemic in Iran. Also, the performance of different departments of medical waste management and future challenges are discussed. Methods: The daily consumption of face masks and medical waste generation were calculated based on the population data, the percentage of the urban population, face mask acceptance rate, the number of face masks needed per person per day, total COVID-19 confirmed cases, and medical waste generation rate (kg/bed/day). Results: The consumption of face masks in Iran is estimated at 46576000 pieces per day. Also, the three provinces of Tehran (9,560,000 pieces), Khorasan Razavi (3,825,600 pieces), and Isfahan (3,523,200 pieces) have the highest consumption rate of masks, respectively. Increasing the number of confirmed COVID-19 cases has increased the medical waste generation rate. Until April 3, 2021, more than 1,920,394 cases of COVID-19 have been confirmed in Iran, and calculations show that the medical waste generation rate in Iran is about 7,585.56 tons per day. Conclusions: COVID-19 is a highly infectious and problematic disease. The continuous increase in the number of confirmed COVID-19 cases has increased face mask consumption rate and medical waste generation rate, and as a result, new challenges have emerged in the field of solid waste management. These emerging challenges in managing solid waste during the COVID-19 pandemic necessitate the development of appropriate waste management policies and strategies.

Modelling, Composition and production rate of medical solid waste in Tikrit: A case study of Tikrit Teaching Hospital (TTH) in Iraq

2018 ◽  
Vol 1 (2) ◽  
pp. 73-83
Author(s):  
Haneen Ahmed Khudhair
Keyword(s):  
Solid Waste ◽  
Hazardous Waste ◽  
Teaching Hospital ◽  
Specific Weight ◽  
Medical Waste ◽  
Average Moisture Content ◽  
Daily Production ◽  
Number Of Patients ◽  
Obstetric Department

Tikrit Teaching Hospital (TTH), Tikrit, Iraq, was selected for investigation as a case study. Data collection was carried out during TTH visits and by questionnaires. Sampling was performed during a 10-month period, one week each sampling month. The medical waste analyzed was comprised of 63.04% general waste (non-risk) and 36.96% hazardous waste. The results indicated that the medical waste generation rate is 0.9 kg/bed.day and 0.75 kg/patient.day. Statistically significant linear correlations were established between the daily production of medical solid waste and the respective number of patients and the occupied beds in TTH as whole. Based on the average daily production of medical solid waste  produced by the departments of TTH (kg /d), the larger producer of general medical solid waste was obstetric department with average daily production of 25 kg/d, while the larger producer of hazardous medical solid waste was obstetric department with average daily production of 11 kg/d. The average specific weight of total medical waste, general waste, and hazardous waste were determined to be 218.6, 206.5 and 225.54 kg/m3, respectively. The average moisture content of total medical waste, general waste, and hazardous waste were determined to be 21, 20.4 and 23.4 %, respectively. The average general medical waste composition was: 40% organics, 21% plastics, 19% paper, 11% glass and 9% metals. Pathological wastes and sharp objects comprised 43% and 25% of the hazardous medical waste components.   © 2018 JASET, International Scholars and Researchers Association

Medical Waste Management: A Case Study on Rajshahi City Corporation in Bangladesh

2015 ◽  
Vol 6 (1) ◽  
pp. 173-178 ◽  
Author(s):  
MZ Alam ◽  
MS Islam ◽  
MR Islam
Keyword(s):  
Waste Management ◽  
Medical Waste ◽  
Generation Rate ◽  
Waste Generation ◽  
Different Types ◽  
Medical Waste Management ◽  
Waste Generation Rate ◽  
Rajshahi City ◽  
Medical Wastes

The management of medical waste (MW) is of great importance due to its impact on human health and environment. The present practices of improper management of generated medical wastes in different Healthcare Establishment (HCEs) in Rajshahi City Corporation (RCC) is playing a contributing role to create vulnerable condition in spreading out the Diarrhea, Hepatitis and various skin related diseases. The objectives of the study are to identify different types of wastes, its generation rate and assess the existing waste management in various HCEs. The study was carried out in 14 different HCEs that generated much portion of MW of total generated MW in RCC. The methodology of this project was descriptive and consisted of the use of field survey and interviews with the relevant authorities and personnel involved in the management of MW. It was found that the surveyed HCEs generate a total of 1495 kg/day of MW; of which about 1328.6 kg/day (88.87%) are non-infectious and about 166.4 kg/day (11.13%) are infectious. The average waste generation rate for surveyed HCEs is 1.54 kg/bed/day or 0.30 kg/patient/day. It was found from the survey that there is no proper and systematic management of medical wastes. The study reveals that lack of awareness; financial support and willingness are responsible for improper management of MW. So the RCC and HCEs authorities should adopt appropriate policy regarding this issue and provide training program on relevant personnel who are engaged in medical waste management.DOI: http://dx.doi.org/10.3329/jesnr.v6i1.22062 J. Environ. Sci. & Natural Resources, 6(1): 173-178 2013

scholarly journals Determinants of Municipal Solid Waste in Urban Zone of Baglung Municipality, Nepal

2021 ◽  
Vol 26 (2) ◽  
pp. 43-52
Author(s):  
Tejendra Regmi ◽  
Manisha Ghimire ◽  
Suman Man Shrestha
Keyword(s):  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Household Survey ◽  
Generation Rate ◽  
Household Waste ◽  
Management Approach ◽  
Waste Generation ◽  
Msw Management ◽  
Urban Zone

The studies on the solid waste generation and characterization with their relationships with different determinants are limited in Nepal which helps in the implementation of the solid waste management approach.  This study is focused on the quantification of the municipal solid waste (MSW) generation rate and its characterization in the Baglung Municipality, Nepal. Factors affecting MSW generation with perceptions towards the MSW management were also evaluated through household survey. The study was carried out in the month of January 2021 in four wards of urban zone in the municipality. The average waste generation rate in 188 households (HHs), 20 institutions, and 20 commercial sites were 0.43 kg/c/d, 0.83 kg/institute/day and 2.75 kg/commercial site/day, respectively. The largest component, which accounted for about 74% household waste, 75% institutional waste and 52% commercial waste composed of organic waste. The analysis of variance (ANOVA) indicates a significant variation in between MSW generation rate with respect to household size and type of days. Regarding affordability of MSW management, most of the households can be able to afford service fee ranged from US$ 0.5 to 1.0 (55.38%). Most of the households dispose of solid waste in the municipal vehicle. From this study, the residents of the municipality are suggested to prepare compost manure at the source for the minimization of waste volume to be transported and disposed of. Higher production of recyclable MSW depicts there is a possibility of revenue generation and importance of MSW management in community mobilization in the municipality.

Sign in / Sign up

Export Citation Format

Share Document