scholarly journals A new algebraic LQR weight selection algorithm for tracking control of 2 DoF torsion system

2017 ◽  
Vol 66 (1) ◽  
pp. 55-75 ◽  
Author(s):  
Vinodh Kumar Elumalai ◽  
Raaja Ganapathy Subramanian
Keyword(s):  
Linear Quadratic Regulator ◽  
High Gain ◽  
Algebraic Riccati Equation ◽  
Selection Algorithm ◽  
Linear Quadratic ◽  
Tracking Errors ◽  
Lqr Control ◽  
Control Scheme ◽  
Design Requirements ◽  
Command Following

Abstract This paper proposes a novel linear quadratic regulator (LQR) weight selection algorithm by synthesizing the algebraic Riccati equation (ARE) with the Lagrange multiplier method for command following applications of a 2 degree of freedom (DoF) torsion system. The optimal performance of LQR greatly depends on the elements of weighting matrices Q and R. However, normally these weighting matrices are chosen by a trial and error approach which is not only time consuming but cumbersome. Hence, to address this issue, blending the design criteria in time domain with the ARE, we put forward an algebraic weight selection algorithm, which makes the LQR design both simple and modular. Moreover, to estimate the velocity of a servo angle, a high gain observer (HGO) is designed and integrated with the LQR control scheme. The efficacy of the proposed control scheme is tested on a benchmark 2 DoF torsion system for a trajectory tracking application. Both the steady state and dynamic characteristics of the proposed controller are assessed. The experimental results accentuate that the proposed HGO based LQR scheme can guarantee the system to attain the design requirements with minimal vibrations and tracking errors.

FULL-AND REDUCED- ORDER COMPENSATOR FOR INNOSAT ATTITUDE CONTROL

2015 ◽  
Vol 76 (12) ◽  
Author(s):  
Fadzilah Hashim ◽  
Mohd Yusoff Mashor ◽  
Siti Maryam Sharun
Keyword(s):  
State Space ◽  
Attitude Control ◽  
Space Form ◽  
Transfer Functions ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Reduced Order ◽  
Lqr Control ◽  
Best Value ◽  
Control Scheme

This paper presents a study on the estimator based on Linear Quadratic Regulator (LQR) control scheme for Innovative Satellite (InnoSAT). By using LQR control scheme, the controller and the estimator has been derived for state space form in all three axes to stabilize the system’s performance. This study starts by converting the transfer functions of attitude control into state space form.  Then, the step continues by finding the best value of weighting matrices of LQR in order to obtain the best value of controller gain, K. After that, the best value of L is obtained for the estimator gain. The value of K and L is combined in forming full order compensator and in the same time the reduced order compensator is also formed. Lastly, the performance of full order compensator is compared to reduced order compensator. From the simulation, results indicate that both types of estimators have presented good stability and tracking performance. However, reduced order estimator has simpler equation and faster convergence to zero than the full order estimator. This property is very important in developing a satellite attitude control for real-time implementation.

Design and comparison of LQR and a novel robust backstepping controller for supercavitating vehicles

2016 ◽  
Vol 39 (2) ◽  
pp. 149-162 ◽  
Author(s):  
Xiaoyu Zhang ◽  
Yanhui Wei ◽  
Yuntao Han ◽  
Tao Bai ◽  
Kemao Ma
Keyword(s):  
Actuator Saturation ◽  
Control Design ◽  
Linear Quadratic Regulator ◽  
Underwater Vehicles ◽  
Friction Drag ◽  
Linear Quadratic ◽  
Supercavitating Vehicles ◽  
Lqr Control ◽  
Control Scheme ◽  
Backstepping Controller

Traditional underwater vehicles are limited in speed due to dramatic friction drag on the hull. Supercavitating vehicles exploit supercavitation as a means to reduce drag and increase their underwater speed. Compared with fully wetted vehicles, the non-linearity in the modelling of cavitator, fin and in particular the planing force make the control design of supercavitating vehicles more challenging. Dominant non-linearities associated with planing force are taken into account in the model of supercavitating vehicles in this paper. Two controllers are proposed to realize stable system dynamics and tracking responses, a linear quadratic regulator (LQR) control scheme and a robust backstepping control (RBC) scheme. The proposed backstepping procedure, in association with integral filters technique, exploits the possibility of avoiding the overparameterization problem existing in the classical backstepping process. In particular, the achieved stability is robust to modelling errors in supercavitating vehicles. Compared with the LQR control scheme, the RBC scheme is seen to increase the robustness with saturation compensation algorithm, which can be useful for avoiding actuator saturation in magnitude.

Lateral Stability Analysis for Car-Trailer Combinations

2016 ◽  
Author(s):  
Eungkil Lee ◽  
Tao Sun ◽  
Yuping He
Keyword(s):  
Stability Analysis ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Parametric Study ◽  
Degrees Of Freedom ◽  
Linear Quadratic Regulator ◽  
Lateral Stability ◽  
Linear Quadratic ◽  
Lqr Control ◽  
Ct System

This paper presents a parametric study of linear lateral stability of a car-trailer (CT) combination in order to examine the fidelity, complexity, and applicability for control algorithm development for CT systems. Using MATLAB software, a linear yaw-roll model with 5 degrees of freedom (DOF) is developed to represent the CT combination. In the case of linear stability analysis, a parametric study was carried out using eigenvalue analysis based on a linear yaw-roll CT model with varying parameters. Built upon the linear stability analysis, an active trailer differential braking (ATDB) controller was designed for the CT system using the linear quadratic regulator (LQR) technique. The simulation study presented in this paper shows the effectiveness of the proposed LQR control design and the influence of different trailer parameters.

scholarly journals Signature PSO: A novel inertia weight adjustment using fuzzy signature for LQR tuning

2021 ◽  
Vol 10 (1) ◽  
pp. 308-318
Author(s):  
Achmad Komarudin ◽  
Novendra Setyawan ◽  
Leonardo Kamajaya ◽  
Mas Nurul Achmadiah ◽  
Zulfatman Zulfatman
Keyword(s):  
Linear Quadratic Regulator ◽  
Absolute Error ◽  
Control Parameters ◽  
Optimum Control ◽  
Exploration And Exploitation ◽  
Linear Quadratic ◽  
Lqr Control ◽  
Inertia Weight ◽  
Adjustment Strategy ◽  
Complete Optimization

Particle swarm optimization (PSO) is an optimization algorithm that is simple and reliable to complete optimization. The balance between exploration and exploitation of PSO searching characteristics is maintained by inertia weight. Since this parameter has been introduced, there have been several different strategies to determine the inertia weight during a train of the run. This paper describes the method of adjusting the inertia weights using fuzzy signatures called signature PSO. Some parameters were used as a fuzzy signature variable to represent the particle situation in a run. The implementation to solve the tuning problem of linear quadratic regulator (LQR) control parameters is also presented in this paper. Another weight adjustment strategy is also used as a comparison in performance evaluation using an integral time absolute error (ITAE). Experimental results show that signature PSO was able to give a good approximation to the optimum control parameters of LQR in this case.

scholarly journals DYNAMICS BASED CONTROL OF A SKID STEERING MOBILE ROBOT

2016 ◽  
Vol 9 (2) ◽  
pp. 70 ◽  
Author(s):  
Osama Elshazly ◽  
Hossam Abbas ◽  
Zakarya Zyada
Keyword(s):  
Mobile Robot ◽  
Inverse Dynamics ◽  
Linear Quadratic Regulator ◽  
Nonlinear Controller ◽  
Linear Quadratic ◽  
Reduced Order ◽  
Lqr Control ◽  
Control Schemes ◽  
Skid Steering ◽  
Drive Model

In this paper, development of a reduced order, augmented dynamics-drive model that combines both the dynamics and drive subsystems of the skid steering mobile robot (SSMR) is presented. A Linear Quadratic Regulator (LQR) control algorithm with feed-forward compensation of the disturbances part included in the reduced order augmented dynamics-drive model is designed. The proposed controller has many advantages such as its simplicity in terms of design and implementation in comparison with complex nonlinear control schemes that are usually designed for this system. Moreover, the good performance is also provided by the controller for the SSMR comparable with a nonlinear controller based on the inverse dynamics which depends on the availability of an accurate model describing the system. Simulation results illustrate the effectiveness and enhancement provided by the proposed controller.

LQR for State-Bounded Structural Control

1996 ◽  
Vol 118 (1) ◽  
pp. 113-119 ◽  
Author(s):  
C.-H. Chuang ◽  
D.-N. Wu ◽  
Q. Wang
Keyword(s):  
Structural Control ◽  
Vibration Amplitude ◽  
Gain Control ◽  
Linear Quadratic Regulator ◽  
Matching Condition ◽  
High Gain ◽  
Time Instant ◽  
Linear Quadratic ◽  
Earthquake Excitation ◽  
High Gain Control

In order to prevent structural damages, it is more important to bound the vibration amplitude than to reduce the vibration energy. However, in the performance index for linear quadratic regulator (LQR), the instantaneous amplitude of vibration is not minimized. An ordinary LQR may have an unacceptable amplitude at some time instant but still have a good performance. In this paper, we have developed an LQR with adjustable gains to guarantee bounds on the vibration amplitude. For scalar systems, the weighting for control is switched between two values which give a low-gain control when the amplitude is inside the bound and a high-gain control when the amplitude is going to violate the given bound. For multivariable systems, by assuming a matching condition, a similar controller structure has been obtained. This controller is favored for application since the main structure of a common LQR is not changed; the additional high-gain control is required only if the vibration amplitude fails to stay inside the bound. We have applied this controller to a five-story building with active tendon controllers. The results show that the largest oscillation at the first story stays within a given bound when the building is subject to earthquake excitation.

scholarly journals System design for inverted pendulum using LQR control via IoT

2020 ◽  
Vol 11 ◽  
pp. 12
Author(s):  
Dechrit Maneetham ◽  
Petrus Sutyasadi
Keyword(s):  
Inverted Pendulum ◽  
Control Method ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Lqr Control ◽  
Lqr Controller ◽  
Model Tuning ◽  
And Performance ◽  
Performance Results ◽  
And Control

This research proposes control method to balance and stabilize an inverted pendulum. A robust control was analyzed and adjusted to the model output with real time feedback. The feedback was obtained using state space equation of the feedback controller. A linear quadratic regulator (LQR) model tuning and control was applied to the inverted pendulum using internet of things (IoT). The system's conditions and performance could be monitored and controlled via personal computer (PC) and mobile phone. Finally, the inverted pendulum was able to be controlled using the LQR controller and the IoT communication developed will monitor to check the all conditions and performance results as well as help the inverted pendulum improved various operations of IoT control is discussed.

Backstepping Controller Design for a 5 DOF Spherical Inverted Pendulum

2019 ◽  
Vol 41 ◽  
pp. 37-50 ◽  
Author(s):  
Soukaina Krafes ◽  
Zakaria Chalh ◽  
Abdelmjid Saka
Keyword(s):  
Degrees Of Freedom ◽  
Inverted Pendulum ◽  
Controller Design ◽  
Linear Quadratic Regulator ◽  
Performance Comparison ◽  
Virtual Reality Environment ◽  
Linear Quadratic ◽  
Control Scheme ◽  
Linearized System ◽  
Backstepping Controller

This paper presents a Backstepping controller for five degrees of freedom Spherical Inverted Pendulum. Since the system is nonlinear, unstable, underactuated and MIMO and has a nonsquare form, the classic control design cannot be applied to control it. In order to remedy this problem, we propose in this paper a new method based on hierarchical steps of the Backstepping controller taking into a count the nonlinearities that cannot be neglected. Furthermore, a Linear Quadratic Regulator controller and LQR + PID based on the linearized system model are also designed for performance comparison. Finally, a simulation study is carried out to prove the effectiveness of proposed control scheme and is validated using the virtual reality environment that proves the performance of the Backstepping controller over the linear ones where it brings the pendulum from any initial condition in the upper hemisphere while the base is brought to the origin of the coordinates.

Sign in / Sign up

Export Citation Format

Share Document