scholarly journals The Attempt of the Low-Cycle Fatigue Life Description of Chosen Creep-Resistant Steels Under Mechanical and Thermal Interactions

2017 ◽  
Vol 62 (4) ◽  
pp. 2349-2353
Author(s):  
J. Okrajni ◽  
A. Marek
Keyword(s):  
Fatigue Life ◽  
Low Cycle Fatigue ◽  
Strain Range ◽  
Fatigue Properties ◽  
Cycle Fatigue ◽  
Plastic Strain Range ◽  
Mechanical Fatigue ◽  
Versus Parameter ◽  
Creep Resistant Steels

AbstractThe study focuses on the problem of determination of low-cycle fatigue properties for the chosen group of creep-resistant steels used in the power and chemical industries. It tries to find the parameter which would describe well the fatigue life and take into account mechanical loads and temperature. The results of LCF tests have been presented in the paper. New parameter P has been introduced. This parameter joins a plastic strain range, a stress range and temperature. The fatigue life has been predicted versus parameter P. The comparison of the predicted and observed values of fatigue life shows the agreement between these values. The method of fatigue life prediction formulated in this way is expected to describe the behavior of materials under thermo-mechanical fatigue.

scholarly journals THE EFFECT OF NOTCHES ON THE FATIGUE LIFE OF A NICKEL-BASE GAS TURBINE DISK MATERIAL

2018 ◽  
Vol 20 ◽  
pp. 34-42 ◽  
Author(s):  
Robert Eriksson ◽  
Johan Moverare ◽  
Zhe Chen ◽  
Kjell Simonsson
Keyword(s):  
Fatigue Life ◽  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Notch Root ◽  
Strain Range ◽  
Compact Tension ◽  
Critical Distance ◽  
Cycle Fatigue ◽  
Plastic Strain Range ◽  
Life Model

Gas turbine disks carry significant load under high temperatures and may be subject to fatigue failure. Disks contain several notches in the form of the fir tree blade attachments. Low cycle fatigue tests were performed on blunt notch compact tension specimens made from alloy 718. The results indicated that notch support needed to be incorporated not to cause an overly conservative life prediction. The notch support diminished as the plastic strain range decreased, indicating that notch support is only present in the low cycle fatigue regime. A critical distance approach was applied to account for the notch support. An equation relating the critical distance to the notch root stress was derived. The chosen life model was formulated in terms of a variation on the Smith–Watson–Topper (SWT) parameter. The modified SWT parameter taken at the critical distance was used in a life model calibrated for smooth specimens to successfully predict the fatigue life of notched specimens.

Tensile and Fatigue Properties of Miniature Size Specimens of Sn-5Sb Lead-Free Solder

2016 ◽  
Vol 879 ◽  
pp. 2377-2382 ◽  
Author(s):  
Kyosuke Kobayashi ◽  
Ikuo Shohji ◽  
Hiroaki Hokazono
Keyword(s):  
Fatigue Life ◽  
Strain Rate ◽  
Phase Boundary ◽  
Low Cycle Fatigue ◽  
Strain Range ◽  
Total Strain ◽  
Effect Of Temperature ◽  
Fatigue Properties ◽  
Cycle Fatigue ◽  
Total Strain Range

Tensile and low cycle fatigue properties of Sn-5Sb (mass%) solder were investigated with miniature size tensile specimens. The effect of temperature and strain rate on tensile properties and the effect of temperature on low cycle fatigue properties were examined. Tensile strength increases with increasing strain rate regardless of temperature investigated. For elongation, the effect of temperature on it is negligible although it slightly increases with increasing strain rate. The low cycle fatigue life of Sn-5Sb obeys by the Manson-Coffin’s equation. The effect of temperature on the fatigue life is negligible in the temperature range from 25 oC to 150 oC. In the low cycle fatigue test with a high total strain range of 4%, cracking at phase boundary mainly occurs regardless of temperature investigated. In the case of a low total strain range of 0.4%, ductile fracture mainly occurs, and cracking at phase boundary with generation of grooves also occurs at high temperature.

Low-Cycle Fatigue Life of Continuously Cyclic-Hardening Material

2020 ◽  
Author(s):  
Zhong Zhang ◽  
Xijia Wu
Keyword(s):  
Fatigue Life ◽  
Plastic Strain ◽  
Root Mean Square ◽  
Low Cycle Fatigue ◽  
Cyclic Hardening ◽  
Mean Square ◽  
Cycle Fatigue ◽  
Fatigue Crack Nucleation ◽  
Hardening Material ◽  
Plastic Strain Range

Abstract A general fatigue life equation is derived by modifying the Tanaka-Mura-Wu dislocation pile-up model for variable strain-amplitude fatigue processes, where the fatigue crack nucleation life is expressed in terms of the root mean square of plastic strain range. Low-cycle fatigue tests were conducted on an austenitic stainless steel. at 400°C and 600°C, the material exhibits continuously cyclic-hardening behaviour. The root mean square of plastic strain ranges is evaluated from the experimental data for each test condition at strain rates ranging from 0.0002/s to 0.02/s. The variable-amplitude Tanaka-Mura-Wu model is found to be in good agreement with the LCF data, which effectively proves Miner’s rule on the stored plastic strain energy basis.

Low Cycle Fatigue Properties of FGH720Li Superalloy

2021 ◽  
Vol 1035 ◽  
pp. 292-296
Author(s):  
Zi Chao Peng ◽  
Jun Ying Sheng ◽  
Xu Qing Wang ◽  
Yue Tang
Keyword(s):  
Fatigue Life ◽  
Powder Metallurgy ◽  
Applied Stress ◽  
Low Cycle Fatigue ◽  
Influencing Factor ◽  
Fatigue Tests ◽  
Fatigue Properties ◽  
Nickel Base Superalloy ◽  
Loading Frequency ◽  
Cycle Fatigue

Low cycle fatigue (LCF) properties of a powder metallurgy(PM) nickel base superalloy FGH720Li were systematically studied in this work, including smooth LCF and notched LCF tested at various temperatures and different stress. The relationship between the fatigue life and applied stress was analyzed both for smooth fatigue and notch fatigue tests. The effects of loading frequency and stress ratio on LCF behavior were also studied. As an important influencing factor of the fatigue life in powder metallurgy superalloy, the effect of inclusions on LCF life was also investigated. The results showed that the fatigue properties of FGH720Li alloy was excellent, when tested at the temperature of 450°C and applied stress of 1230MPa, the fatigue life could exceed 5×104 cycles. When tested at 650°C and 1150MPa, the average fatigue life was still beyond 2×105 cycles.

Low-Cycle Fatigue Life of Continuously Cyclic-Hardening Material

2021 ◽  
Author(s):  
Zhong Zhang ◽  
Xijia Wu
Keyword(s):  
Fatigue Life ◽  
Plastic Strain ◽  
Root Mean Square ◽  
Low Cycle Fatigue ◽  
Cyclic Hardening ◽  
Mean Square ◽  
Cycle Fatigue ◽  
Fatigue Crack Nucleation ◽  
Hardening Material ◽  
Plastic Strain Range

Abstract A general fatigue life equation is derived by modifying the Tanaka-Mura-Wu dislocation pile-up model for variable strain-amplitude fatigue processes, where the fatigue crack nucleation life is expressed in terms of the root mean square of plastic strain range. Low-cycle fatigue tests were conducted on an austenitic stainless steel. At 400 ? and 600 ?, the material exhibits continuously cyclic-hardening behaviour. The root mean square of plastic strain ranges is evaluated from the experimental data for each test condition at strain rates ranging from 0.0002/s to 0.02/s. The variable-amplitude Tanaka-Mura-Wu model is found to be in good agreement with the LCF data, which effectively proves Miner's rule on the stored plastic strain energy basis.

Multiaxial Low Cycle Fatigue Life Prediction at 300 °C Using Equivalent Strain Appoach

2011 ◽  
Vol 361-363 ◽  
pp. 1669-1672
Author(s):  
Wen Xiao Zhang ◽  
Guo Dong Gao ◽  
Guang Yu Mu
Keyword(s):  
Fatigue Life ◽  
Life Prediction ◽  
Low Cycle Fatigue ◽  
Fatigue Behavior ◽  
Strain Range ◽  
Cyclic Fatigue ◽  
Equivalent Strain ◽  
Multiaxial Fatigue ◽  
Fatigue Life Prediction ◽  
Cycle Fatigue

The low cycle fatigue behavior was experimentally studied with the 3-dimension notched LD8 aluminum alloy specimens at 300°C. The 3- dimension stress-strain responses of specimens were calculated by means of the program ADINA. The multiaxial fatigue life prediction was carried out according to von Mises’s equivalent theory. The results from the prediction showed that the equivalent strain range can be served as the valid mechanics for predicting multiaxial high temperature and low cyclic fatigue life.

Low Cycle Fatigue and Fracture Behavior of Nickel-Base Superalloy CM247LC at 760°C

2004 ◽  
Vol 449-452 ◽  
pp. 561-564 ◽  
Author(s):  
Seong Moon Seo ◽  
In Sup Kim ◽  
Chang Yong Jo
Keyword(s):  
Fatigue Crack ◽  
Low Cycle Fatigue ◽  
Fatigue Crack Initiation ◽  
Strain Range ◽  
Initiation Site ◽  
Coarse Grained ◽  
Fatigue Properties ◽  
Nickel Base Superalloy ◽  
Cycle Fatigue ◽  
Fine Grained

Low cycle fatigue (LCF) behavior of coarse and fine grained superalloy CM247LC at 760°C has been investigated. Both coarse and fine grained CM247LC showed similar cyclic stress response, however, the fine grained CM247LC specimen exhibited relatively uniform and superior fatigue properties to the coarse grained one. It was found that fatigue crack initiation of the alloy was keen to the applied strain range. Fatigue crack initiated at the surface of the specimen with high strain range (∆εt≥( 0.7%) while the initiation site moved to the internal defects at low strain range (∆εt≤0.6%).

Assessment of low-cycle fatigue life of Sn-3.5mass%Ag-X (X=Bi or Cu) alloy by strain range partitioning approach

2001 ◽  
Vol 30 (9) ◽  
pp. 1184-1189 ◽  
Author(s):  
Yoshiharu Kariya ◽  
Tomoo Morihata ◽  
Eisaku Hazawa ◽  
Masahisa Otsuka
Keyword(s):  
Fatigue Life ◽  
Low Cycle Fatigue ◽  
Strain Range ◽  
Cycle Fatigue ◽  
Cu Alloy

Model of the Deformation Process under Thermo-Mechanical Fatigue Conditions

2012 ◽  
Vol 726 ◽  
pp. 143-149
Author(s):  
Jerzy Okrajni ◽  
Grzegorz Junak
Keyword(s):  
Deformation Process ◽  
Low Cycle Fatigue ◽  
Hysteresis Loops ◽  
Fatigue Tests ◽  
Mathematical Representation ◽  
Deformation Characteristics ◽  
Cycle Fatigue ◽  
Calculation Algorithm ◽  
Mechanical Fatigue

The paper focuses on the development of a mathematical representation of deformation characteristics under the conditions of an elevated changeable temperature and mechanical loads. The method proposed in the paper is based on the use of characteristics determined in low-cycle fatigue tests at constant temperatures. Hysteresis loops reflecting the behaviour of a material under the conditions of low-cycle loads at an elevated temperature were primarily used. The effect of relaxation on the course of the hysteresis loop was taken into account. The steady state of the material is referred to in the proposed representation. A calculation algorithm was developed to enable the determination of the stress value for subsequent increases of strain over time. The results obtained were compared with experimentally determined characteristics.

Sign in / Sign up

Export Citation Format

Share Document