Reversible addition fragmentation chain transfer (RAFT) polymerization of styrene in fluid CO2

e-Polymers ◽  
2004 ◽  
Vol 4 (1) ◽  
Author(s):  
Toshihiko Arita ◽  
Sabine Beuermann ◽  
Michael Buback ◽  
Philipp Vana
Keyword(s):  
Chain Transfer ◽  
Raft Polymerization ◽  
Molecular Weights ◽  
Reversible Addition ◽  
Significant Difference ◽  
Raft Agent ◽  
Successful Control ◽  
A Minor ◽  
Peak Widths

Abstract Reversible addition fragmentation chain transfer (RAFT) polymerizations of styrene in fluid CO2 have been carried out at 80°C and 300 bar using cumyl dithiobenzoate as the controlling agent in the concentration range of 3.5·10-3 to 2.1·10-2 mol/L. This is the first report on RAFT polymerization in fluid CO2. The polymerization rates were retarded depending on the employed RAFT agent concentration with no significant difference between the RAFT polymerization performed in fluid CO2 and in toluene. Full chain length distributions were analyzed with respect to peak molecular weights, indicating the successful control of radical polymerization in fluid CO2. A characterization of the peak widths may suggest a minor influence of fluid CO2 on the addition reaction of macroradicals on the dithiobenzoate group.

Synthesis and characterization of a naphthalimide–dye end-labeled copolymer by reversible addition–fragmentation chain transfer (RAFT) polymerization

2011 ◽  
Vol 89 (3) ◽  
pp. 317-325 ◽  
Author(s):  
Binxin Li ◽  
Daniel Majonis ◽  
Peng Liu ◽  
Mitchell A. Winnik
Keyword(s):  
Chain Transfer ◽  
Raft Polymerization ◽  
Polymer Composition ◽  
Cooh Group ◽  
Agent Based ◽  
Molecular Weights ◽  
Reversible Addition ◽  
Raft Agent ◽  
End Use ◽  
Naphthalimide Dye

We describe the synthesis of an end-functionalized copolymer of N-(2-hydroxypropyl)methacrylamide (HPMA) and N-hydroxysuccinimide methacrylate (NMS) by reversible addition–fragmentation chain transfer (RAFT) polymerization. To control the polymer composition, the faster reacting monomer (NMS) was added slowly to the reaction mixture beginning 30 min after initating the polymerization (ca. 16% HPMA conversion). One RAFT agent, based on azocyanopentanoic acid, introduced a –COOH group to the chain at one end. Use of a different RAFT agent containing a 4-amino-1,8-naphthalimide dye introduced a UV–vis absorbing and fluorescent group at this chain end. The polymers obtained had molecular weights of 30 000 and 20 000, respectively, and contained about 30 mol% NMS active ester groups.

Mechanism of CPDB-Mediated RAFT Polymerization of Methyl Methacrylate: Influence of Pressure and RAFT Agent Concentration

2009 ◽  
Vol 62 (11) ◽  
pp. 1484 ◽  
Author(s):  
Michael Buback ◽  
Wibke Meiser ◽  
Philipp Vana
Keyword(s):  
Methyl Methacrylate ◽  
Raft Polymerization ◽  
Molecular Weights ◽  
Molecular Weight Distributions ◽  
Reversible Addition ◽  
Rate Of Polymerization ◽  
Weight Distributions ◽  
Raft Agent ◽  
Successful Control ◽  
Mma Polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerizations of methyl methacrylate (MMA) in bulk at 60°C were performed at five pressures up to 200 MPa using 2-(2′-cyanopropyl)dithiobenzoate (CPDB) as RAFT agent at concentrations between 1.5 × 10–3 and 2.0 × 10–2 mol L–1. Applying high pressure during polymerization increases the rate of polymerization, but no effect on polydispersity was observed. Molecular weight distributions and average molecular weights of the final polymer indicated the successful control of MMA polymerization even at low CPDB concentrations. The slight retardation observed is adequately described by the dependence the termination rate coefficient, kt, on the chain-length.

scholarly journals Nano-Assemblies from Amphiphilic PnBA-b-POEGA Copolymers as Drug Nanocarriers

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1164
Author(s):  
Angeliki Chroni ◽  
Thomas Mavromoustakos ◽  
Stergios Pispas
Keyword(s):  
Molecular Weight ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Polymeric Nanocarriers ◽  
Reversible Addition ◽  
2D Noesy ◽  
Drug Nanocarriers ◽  
Glycol Methyl Ether ◽  
Different Molecular Weight

The focus of this study is the development of highly stable losartan potassium (LSR) polymeric nanocarriers. Two novel amphiphilic poly(n-butyl acrylate)-block-poly(oligo(ethylene glycol) methyl ether acrylate) (PnBA-b-POEGA) copolymers with different molecular weight (Mw) of PnBA are synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization, followed by the encapsulation of LSR into both PnBA-b-POEGA micelles. Based on dynamic light scattering (DLS), the PnBA30-b-POEGA70 and PnBA27-b-POEGA73 (where the subscripts denote wt.% composition of the components) copolymers formed micelles of 10 nm and 24 nm in water. The LSR-loaded PnBA-b-POEGA nanocarriers presented increased size and greater mass nanostructures compared to empty micelles, implying the successful loading of LSR into the inner hydrophobic domains. A thorough NMR (nuclear magnetic resonance) characterization of the LSR-loaded PnBA-b-POEGA nanocarriers was conducted. Strong intermolecular interactions between the biphenyl ring and the butyl chain of LSR with the methylene signals of PnBA were evidenced by 2D-NOESY experiments. The highest hydrophobicity of the PnBA27-b-POEGA73 micelles contributed to an efficient encapsulation of LSR into the micelles exhibiting a greater value of %EE compared to PnBA30-b-POEGA70 + 50% LSR nanocarriers. Ultrasound release profiles of LSR signified that a great amount of the encapsulated LSR is strongly attached to both PnBA30-b-POEGA70 and PnBA27-b-POEGA73 micelles.

scholarly journals Redox-Initiated Reversible Addition–Fragmentation Chain Transfer (RAFT) Polymerization

2019 ◽  
Vol 72 (7) ◽  
pp. 479 ◽  
Author(s):  
Amin Reyhani ◽  
Thomas G. McKenzie ◽  
Qiang Fu ◽  
Greg G. Qiao
Keyword(s):  
Redox Reactions ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Molecular Structures ◽  
Biologically Relevant ◽  
Molecular Weights ◽  
Polymeric Biomaterials ◽  
Reversible Addition ◽  
Wide Range ◽  
Metal Catalyzed

Reversible addition–fragmentation chain transfer (RAFT) polymerization initiated by a radical-forming redox reaction between a reducing and an oxidizing agent (i.e. ‘redox RAFT’) represents a simple, versatile, and highly useful platform for controlled polymer synthesis. Herein, the potency of a wide range of redox initiation systems including enzyme-mediated redox reactions, the Fenton reaction, peroxide-based reactions, and metal-catalyzed redox reactions, and their application in initiating RAFT polymerization, are reviewed. These redox-RAFT polymerization methods have been widely studied for synthesizing a broad range of homo- and co-polymers with tailored molecular weights, compositions, and (macro)molecular structures. It has been demonstrated that redox-RAFT polymerization holds particular promise due to its excellent performance under mild conditions, typically operating at room temperature. Redox-RAFT polymerization is therefore an important and core part of the RAFT methodology handbook and may be of particular importance going forward for the fabrication of polymeric biomaterials under biologically relevant conditions or in biological systems, in which naturally occurring redox reactions are prevalent.

Synthesis of Novel Triazole-Containing Phosphonate Polymers

2015 ◽  
Vol 68 (4) ◽  
pp. 680 ◽  
Author(s):  
Ciarán Dolan ◽  
Briar Naysmith ◽  
Simon F. R. Hinkley ◽  
Ian M. Sims ◽  
Margaret A. Brimble ◽  
...  
Keyword(s):  
Chain Transfer ◽  
Click Reaction ◽  
Raft Polymerization ◽  
Ethyl Acrylate ◽  
Polymer Chemistry ◽  
Synthesis And Characterization ◽  
Reversible Addition

The objective of this research was to develop novel phosphonate-containing polymers as they remain a relatively under researched area of polymer chemistry. Herein, we report the synthesis and characterization of 2-(1-(2-(diethoxyphosphoryl)ethyl)-1H-1,2,3-triazol-4-yl)ethyl acrylate (M1) and diethyl (2-(4-(2-acrylamidoethyl)-1H-1,2,3-triazol-1-yl)ethyl)phosphonate (M2) monomers using the copper-catalyzed azide–alkyne cycloaddition (CuAAC) ‘click’ reaction, and their subsequent polymerization via both uncontrolled and reversible addition–fragmentation chain transfer (RAFT) polymerization techniques yielding phosphonate polymers (P1–P4).

scholarly journals Synthesis and characterization of triphenylamine and Bbis(indolyl)methane center-functionalized polymer via reversible addition-fragmentation chain transfer polymerization

e-Polymers ◽  
2008 ◽  
Vol 8 (1) ◽  
Author(s):  
Jie Xu ◽  
Wei Shang ◽  
Jian Zhu ◽  
Zhenping Cheng ◽  
Nianchen Zhou ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Chloroform Solution ◽  
Monomer Conversion ◽  
Benzyl Ester ◽  
Chain Extension ◽  
Reversible Addition ◽  
Raft Agent ◽  
Cyclic Voltammetry Method

AbstractA novel bis-functional reversible addition-fragmentation chain transfer (RAFT) agent bearing triphenylamine (TPA) and bis(indolyl)methane (BIM) groups, {4-[bis(1-carbodithioic acid benzyl ester-indol-3-yl)methyl]phenyl}diphenylamine (BCIMPDPA), was synthesized and successfully used as the RAFT agent to mediate the polymerization of styrene (St). The polymerization results showed that reversible addition-fragmentation chain transfer (RAFT) polymerization of St could be well controlled. The kinetic plot showed it was of first order and the numberaverage molecular weight (Mn(GPC)) of the polymer measured by GPC increased linearly with monomer conversion, simultaneously, the molecular weight distribution of the polymer was also relatively narrow. In addition, the existence of the TPA and BIM groups in the middle of polymer chain was confirmed by chain extension reaction and 1H NMR spectrum. The optical properties of the functionalized polystyrene (PS) in chloroform solution were also investigated. Furthermore, the redox process of the RAFT agent and the functionalized PS were studied by cyclic voltammetry method.

Chiral Recognition of L-Carnitine Using Surface Molecularly Imprinted Microspheres via RAFT Polymerization

2014 ◽  
Vol 884-885 ◽  
pp. 33-36 ◽  
Author(s):  
Lin Tong Hou ◽  
Jiao Jiao Chen ◽  
Hong Jun Fu ◽  
Xin Lei Fu
Keyword(s):  
Experimental Data ◽  
Chiral Recognition ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Isothermal Adsorption ◽  
Molecularly Imprinted ◽  
Reversible Addition ◽  
Ft Ir ◽  
Molecularly Imprinted Microspheres

A molecularly imprinted microsphere (MIPs) was prepared successfullyviasurface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization. Characterization of the obtained MIPs was achieved by FT-IR and TGA. The isothermal adsorption and chiral separation experiments of MIPs on L-Carnitine were investigated. Compared with non-imprinted microsphere (NMIPs) adsorbent, MIPs showed faster adsorption rate and stronger adsorption capacity for L-Carnitine. Equilibrium experimental data of MIPs fitted the Langmuir isotherm better. Furthermore, the MIPs also exhibited enantioselectivity for L-Carnitine through the resolution experiment.

RAFT Polymerization of Monomers with Highly Disparate Reactivities: Use of a Single RAFT Agent and the Synthesis of Poly(styrene-block-vinyl acetate)

2013 ◽  
Vol 66 (12) ◽  
pp. 1564 ◽  
Author(s):  
Lily A. Dayter ◽  
Kate A. Murphy ◽  
Devon A. Shipp
Keyword(s):  
Block Copolymers ◽  
Vinyl Acetate ◽  
Chain Transfer ◽  
Raft Polymerization ◽  
Good Control ◽  
Scanning Calorimetry ◽  
Styrene Polymerization ◽  
Reversible Addition ◽  
Raft Agent ◽  
End Group

A single reversible addition–fragmentation chain transfer (RAFT) agent, malonate N,N-diphenyldithiocarbamate (MDP-DTC) is shown to successfully mediate the polymerization of several monomers with greatly differing reactivities in radical/RAFT polymerizations, including both vinyl acetate and styrene. The chain transfer constants (Ctr) for MDP-DTC for both these monomers were evaluated; these were found to be ~2.7 in styrene and ~26 in vinyl acetate, indicating moderate control over styrene polymerization and good control of vinyl acetate polymerization. In particular, the MDP-DTC RAFT agent allowed for the synthesis of block copolymers of these two monomers without the need for protonation/deprotonation switching, as has been previously developed with N-(4-pyridinyl)-N-methyldithiocarbamate RAFT agents, or other end-group transformations. The thermal properties of the block copolymers were studied using differential scanning calorimetry, and those with sufficiently high molecular weight and styrene composition appear to undergo phase separation. Thus, MDP-DTC may be useful for the production of other block copolymers consisting of monomers with highly dissimilar reactivities.

Sign in / Sign up

Export Citation Format

Share Document