scholarly journals Unsteady laminar mixed convection boundary layer flow near a vertical wedge due to oscillations in the free-stream and surface temperature

2016 ◽  
Vol 21 (1) ◽  
pp. 169-186 ◽  
Author(s):  
N.C. Roy ◽  
Md. A. Hossain ◽  
S. Hussain
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Mixed Convection ◽  
Surface Temperature ◽  
Skin Friction ◽  
Free Stream ◽  
Asymptotic Series ◽  
Frequency Range ◽  
Laminar Mixed Convection ◽  
Vertical Wedge

Abstract The unsteady laminar boundary layer characteristics of mixed convection flow past a vertical wedge have been investigated numerically. The free-stream velocity and surface temperature are assumed to be oscillating in the magnitude but not in the direction of the oncoming flow velocity. The governing equations have been solved by two distinct methods, namely, the straightforward finite difference method for the entire frequency range, and the extended series solution for low frequency range and the asymptotic series expansion method for high frequency range. The results demonstrate the effects of the Richardson number, Ri, introduced to quantify the influence of mixed convection and the Prandtl number, Pr, on the amplitudes and phase angles of the skin friction and heat transfer. In addition, the effects of these parameters are examined in terms of the transient skin friction and heat transfer.

scholarly journals Conjugate Heat and Mass Transfer on Fluctuating Mixed Convection Flow along a Vertical Wedge with Thermal Radiation

2017 ◽  
Vol 22 (3) ◽  
pp. 539-565
Author(s):  
M.N. Firoza ◽  
N.C. Roy ◽  
Md. A. Hossain
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Thermal Radiation ◽  
Surface Temperature ◽  
Skin Friction ◽  
Heat And Mass Transfer ◽  
Numerical Solutions ◽  
Asymptotic Series ◽  
Frequency Range ◽  
Vertical Wedge

AbstractWe study the boundary layer characteristics of heat and mass transfer flow past a vertical wedge in the presence of thermal radiation. The surface temperature and the species concentration are assumed to be oscillating in the magnitude but not in the direction of oncoming flow velocity. The governing equations have been solved by two distinct methods, namely, the straightforward finite difference method for the entire frequency range, and the series solution for the low frequency range and the asymptotic series expansion method for the high frequency range. Numerical solutions have been presented in terms of the amplitudes and phase angles of the skin friction, the rate of heat transfer and the mass transfer with the variations of Richardson’s number, the Prandtl number, the conduction–radiation parameter, the surface temperature parameter and the Schmidt number. Furthermore, the effects of these parameters are examined in terms of the transient skin friction, heat transfer and mass transfer.

scholarly journals Surface temperature and free-stream velocity oscillation effects on mixed convention slip flow from surface of a horizontal circular cylinder

2020 ◽  
Vol 24 (Suppl. 1) ◽  
pp. 13-23
Author(s):  
Zia Ullah ◽  
Muammad Ashraf ◽  
Saqib Zia ◽  
Ishtiaq Ali
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Mixed Convection ◽  
Surface Temperature ◽  
Skin Friction ◽  
Slip Velocity ◽  
Free Stream ◽  
Slip Flow ◽  
Stream Velocity ◽  
Velocity Oscillation

The present phenomena address the slip velocity effects on mixed convection flow of electrically conducting fluid with surface temperature and free stream velocity oscillation over a non-conducting horizontal cylinder. To remove the difficulties in illustrating the coupled PDE, the primitive variable formulation for finite dif?ference technique is proposed to transform dimensionless equations into primitive form. The numerical simulations of coupled non-dimensional equations are exam?ined in terms of fluid slip velocity, temperature, and magnetic velocity which are used to calculate the oscillating components of skin friction, heat transfer, and cur?rent density for various emerging parameters magnetic force parameter, ?, mixed convection parameter, ?, magnetic Prandtl number, ?, Prandtl number, and slip factor, SL. It is observed that the effect of slip flow on the non-conducting cylinder is reduced the fluid motion. A minimum oscillating behavior is noted in skin friction at each position but maximum amplitude of oscillation in heat transfer is observed at each position ? = ?/4 and 2?/3. It is further noticed that a fluid velocity increas?es sharply with the impact of slip factor on the fluid-flow mechanism. Moreover, due to frictional forces with lower magnitude between viscous layers, the rise in Prandtl number leads to decrease in skin fiction and heat transfer which is physi?cally in good agreement.

scholarly journals Surface temperature and free-stream velocity oscillation effects on mixed convention slip flow from surface of a horizontal circular cylinder

2020 ◽  
Vol 24 (Suppl. 1) ◽  
pp. 13-23
Author(s):  
Zia Ullah ◽  
Muammad Ashraf ◽  
Saqib Zia ◽  
Ishtiaq Ali
Keyword(s):  
Heat Transfer ◽  
Prandtl Number ◽  
Mixed Convection ◽  
Surface Temperature ◽  
Skin Friction ◽  
Slip Velocity ◽  
Free Stream ◽  
Slip Flow ◽  
Stream Velocity ◽  
Velocity Oscillation

The present phenomena address the slip velocity effects on mixed convection flow of electrically conducting fluid with surface temperature and free stream velocity oscillation over a non-conducting horizontal cylinder. To remove the difficulties in illustrating the coupled PDE, the primitive variable formulation for finite dif?ference technique is proposed to transform dimensionless equations into primitive form. The numerical simulations of coupled non-dimensional equations are exam?ined in terms of fluid slip velocity, temperature, and magnetic velocity which are used to calculate the oscillating components of skin friction, heat transfer, and cur?rent density for various emerging parameters magnetic force parameter, ?, mixed convection parameter, ?, magnetic Prandtl number, ?, Prandtl number, and slip factor, SL. It is observed that the effect of slip flow on the non-conducting cylinder is reduced the fluid motion. A minimum oscillating behavior is noted in skin friction at each position but maximum amplitude of oscillation in heat transfer is observed at each position ? = ?/4 and 2?/3. It is further noticed that a fluid velocity increas?es sharply with the impact of slip factor on the fluid-flow mechanism. Moreover, due to frictional forces with lower magnitude between viscous layers, the rise in Prandtl number leads to decrease in skin fiction and heat transfer which is physi?cally in good agreement.

Non-uniform mass transfer in MHD mixed convection flow of water over a sphere with variable viscosity and Prandtl number

2016 ◽  
Vol 26 (7) ◽  
pp. 2235-2251 ◽  
Author(s):  
J. Rajakumar ◽  
P. Saikrishnan ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Mixed Convection ◽  
Skin Friction ◽  
Variable Viscosity ◽  
Skin Friction Coefficient ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Content Type ◽  
Slot Suction

Purpose The purpose of this paper is to consider axisymmetric mixed convection flow of water over a sphere with variable viscosity and Prandtl number and an applied magnetic field. Design/methodology/approach The non-similar solutions have been obtained from the origin of the streamwise co-ordinate to the point of zero skin friction using quasilinearization technique with an implicit finite-difference scheme. Findings The effect of M is not notable on the temperature and heat transfer coefficient when λ is large. The skin friction coefficient and velocity profile are enhance with the increase of MHD parameter M when λ is small. Viscous dissipation has no significant on the skin friction coefficient under MHD effect. For M=1, the movement of the slot or slot suction or slot injection do not cause any effect on flow separation. The slot suction and the movement of the slot in downstream direction delay the point of zero skin friction for M=0. Originality/value The present results are original and new for water boundary-layer flow over sphere in mixed convection flow with MHD effect and non-uniform mass transfer. So this study would be useful in analysing the skin friction and heat transfer coefficient on sphere of mixed convection flow of water boundary layer with MHD effect.

scholarly journals Comparison of k-ε Models in Predicting Heat Transfer and Skin Friction Under High Free Stream Turbulence

1996 ◽  
Author(s):  
Ganesh R. Iyer ◽  
Savash Yavuzkurt
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Boundary Layer ◽  
Skin Friction ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Skin Friction Coefficient ◽  
Empirical Correlations ◽  
Free Stream Turbulence ◽  
Boundary Layer Equations

Calculations of the effects of high free stream turbulence (FST) on heat transfer and skin friction in a flat plate turbulent boundary layer using different k-ε models (Launder-Sharma, K-Y Chien, Lam-Bremhorsi and Jones-Launder) are presented. This study was carried out in order to investigate the prediction capabilities of these models under high FST conditions. In doing so, TEXSTAN, a partial differential equation solver which is based on the ideas of Patankar and Spalding and solves steady-flow boundary layer equations, was used. Firstly, these models were compared as to how they predicted very low FST (≤ 1% turbulence intensity) cases. These baseline cases were tested by comparing predictions with both experimental data and empirical correlations. Then, these models were used in order to determine the effect of high FST (>5% turbulence intensity) on heat transfer and skin friction and compared with experimental data. Predictions for heat transfer and skin friction coefficient for all the turbulence intensities tested by all the models agreed well (within 1–8%) with experimental data. However, all these models predicted poorly the dissipation of turbulent kinetic energy (TKE) in the free stream and TKE profiles. Physical reasoning as to why the aforementioned models differ in their predictions and the probable cause of poor prediction of free-stream TKE and TKE profiles are given.

Skin Friction and Heat Transfer for Laminar Boundary-Layer Flow With Variable Properties and Variable Free-Stream Velocity

1953 ◽  
Vol 20 (3) ◽  
pp. 415-421
Author(s):  
S. Levy ◽  
R. A. Seban
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Prandtl Number ◽  
Skin Friction ◽  
Laminar Boundary Layer ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Free Stream Velocity ◽  
Stream Velocity ◽  
Layer Flow

Abstract Numerical solutions of the momentum and energy equations are presented for particular types of laminar boundary-layer flow analogous to the Hartree “wedge flows.” Variation of the viscosity and of the thermal conductivity is considered under the circumstances of no dissipation, favorable pressure gradient, and the product of conductivity and density a constant. The solution is based on approximate representations of the velocity and temperature profiles in the boundary layer and these are of such character that the labor of calculation is minimized and the accuracy of the results preserved. The differential equations are reduced to two algebraic equations which rapidly yield the skin friction and the heat transfer in terms of the wall to free-stream temperature ratio for the desired value of Prandtl number. Numerical results are given for a range of wedge flows with gases of Prandtl number 0.70 and 1.0. These results reveal that when the free-stream velocity is variable the temperature difference between the wall and the free stream exerts a substantial effect on the velocity distribution in the boundary layer and on the skin-friction coefficient. Alternatively, the heat-transfer coefficient is not affected radically. A calculation method is presented for the determination of the heat transfer and skin friction for a flow with an arbitrary variation of velocity over an isothermal surface. This method utilizes the results of the present analysis for the variable property wedge flows.

scholarly journals Unsteady MHD Mixed Convection Flow of a Micropolar Fluid Over a Vertical Wedge

2017 ◽  
Vol 22 (2) ◽  
pp. 363-391 ◽  
Author(s):  
N.C. Roy ◽  
R.S.R. Gorla
Keyword(s):  
Heat Transfer ◽  
Skin Friction ◽  
Couple Stress ◽  
Frequency Range ◽  
Friction Couple ◽  
Viscosity Parameter ◽  
Gradient Parameter ◽  
Heat Generation Or Absorption ◽  
The Magnetic Field ◽  
Vertical Wedge

AbstractAn analysis is presented to investigate the unsteady magnetohydrodynamic (MHD) mixed convection boundary-layer flow of a micropolar fluid over a vertical wedge in the presence of thermal radiation and heat generation or absorption. The free-stream velocity and surface temperature are assumed to be oscillating in magnitude but not in the direction of the oncoming flow velocity. The governing equations have been solved by two distinct methods, namely, the finite difference method for the entire frequency range, and the series solution for low frequency range and the asymptotic series expansion method for the high frequency range. Numerical solutions provide a good agreement with the series solutions. The amplitudes of skin friction and couple stress coefficients are found to be strongly dependent on the Richardson number and the vortex viscosity parameter. The Prandtl number, the conduction-radiation parameter, the surface temperature parameter and the pressure gradient parameter significantly affect the amplitudes of skin friction, couple stress and surface heat transfer rates. However, the amplitudes of skin friction coefficient are considerably affected by the magnetic field parameter, whereas the amplitudes of heat transfer rate are appreciably changed with the heat generation or absorption parameter. In addition, results are presented for the transient skin friction, couple stress and heat transfer rate with the variations of the Richardson number, the vortex viscosity parameter, the pressure gradient parameter and the magnetic field parameter.

Sign in / Sign up

Export Citation Format

Share Document