Tensile Strength of Fibres Containing Two Types of Flaws and Its Influence on the Tensile Behaviour of Metal Matrix Composites

1987 ◽  
Vol 78 (7) ◽  
pp. 525-532
Author(s):  
Shojiro Ochiai ◽  
Kozo Osamura
Keyword(s):  
Tensile Strength ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Tensile Behaviour ◽  
Matrix Composites

scholarly journals Processing and Property Evaluation of Nano Al2O3 Reinforced Copper- 5% Tin Composites for Bearing Applications

2019 ◽  
Vol 8 (2S8) ◽  
pp. 1027-1032
Keyword(s):  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Yield Strength ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Copper Matrix ◽  
Matrix Composites ◽  
Wear Properties ◽  
Casting Technique ◽  
Tin Metal

Nano technology has fascinated the attention of numerous material scientists and design engineers. The nano scaled particulates incorporation exhibit many attractive and special properties. The inclusion of nano particulates into the copper matrix might augments the hardness, ultimate tensile strength and yield strength significantly increases, maintaining the ductility. In this paper, the nano Al2O3 reinforced copper - 5%tin- metal matrix composites were manufactured by stir casting technique and reinforcement is varied from 0wt. % to 9wt. % in ventures of 3wt. %. The nano composites are characterized in terms of their mechanical and wear properties. Results revealed that, the distribution of nano Al2O3 particulates is fairly uniform in copper - 5%tin metal matrix. As the level of reinforcement increases, hardness, yield strength, ultimate tensile strength, and wear resistance of the copper - 5%tin – nano Al2O3 metal matrix composites increases. The developed nano metal matrix composites may be an alternative material for bearing applications

Phase, microstructure and tensile strength of Al–Al2O3–C hybrid metal matrix composites

2020 ◽  
Vol 234 (13) ◽  
pp. 2681-2693 ◽  
Author(s):  
Naseem Ahamad ◽  
Aas Mohammad ◽  
Kishor Kumar Sadasivuni ◽  
Pallav Gupta
Keyword(s):  
Tensile Strength ◽  
Impact Strength ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Intermediate Phase ◽  
Stir Casting ◽  
Aluminium Matrix ◽  
Equal Proportion ◽  
Matrix Composites ◽  
Hybrid Metal Matrix Composites

The aim of the present study is to investigate the effect of alumina (Al2O3)–carbon (C) reinforcement on the properties of aluminium matrix. Aluminium matrix reinforced with Al2O3–carbon (2.5, 5, 7.5 and 10 wt.%) in equal proportion was prepared by stir casting. Phase, microstructure, EDS, density, hardness, impact strength and tensile strength of prepared samples have been investigated. X-ray diffraction reports the intermediate phase formation between the matrix and reinforcement phase due to interfacial bonding between them. Scanning electron microscopy shows that Al matrix has uniform distribution of reinforcement particles, i.e. Al2O3 and carbon. Density decreases due to variation of reinforcement because ceramic reinforcement has low density. Hardness decreases due to variation of carbon since it has soft nature. Impact strength was found to increase with addition of reinforcement. Hybrid composite of Al and 5% Al2O3 + 5% carbon reinforcement has maximum engineering and true ultimate tensile strength. It is expected that the present hybrid metal matrix composites will be useful for fabricating stock screws.

Experimental investigation of Mechanical and Tribological Properties of Al6061-ZrC-B4C Hybrid Composites

2020 ◽  
Author(s):  
Theerkka tharaisanan Rajamanickam ◽  
Kathiresan Marimuthu
Keyword(s):  
Tensile Strength ◽  
Wear Resistance ◽  
Impact Strength ◽  
Metal Matrix Composites ◽  
Tribological Properties ◽  
Metal Matrix ◽  
Hybrid Composites ◽  
Zirconium Carbide ◽  
High Wear Resistance ◽  
Matrix Composites

Aluminium metal matrix composites (AMMC’s) have been widely used because of their superior properties like high strength to wear ratio, high wear resistance, and higher heat conduction rate. The additions of reinforcements in the form of discontinuous particles lead to an increase in the properties of Metal Matrix Composites (MMC). In this present work, the ALMMC composite was fabricated with the addition of discontinuous reinforcement particles of Zirconium Carbide (ZrC) and Boron Carbide (B4C). The mechanical properties such as tensile strength, hardness, and impact strength were tested as per the ASTM standards. The tribological properties were tested using a pin-on-disc setup under different loading conditions (10, 20, 30, 40 N). Moreover, the morphological characterization of ALMMC was carried out by using the Scanning Electron Microscope (SEM) analysis. Furthermore, the Differential Thermal Analysis (DTA) and Thermogravimetric Analysis (TGA) was accomplished to find the thermal stability of ALMMC. The findings show that the variations of reinforcement of ZrC added had given improved properties like hardness, tensile strength, impact strength and wear resistance.

Sign in / Sign up

Export Citation Format

Share Document