Numerical analysis of geometrical nonlinear aeroelasticity with CFD/CSD method

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Xueyuan Nie
Keyword(s):  
Finite Element ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Data Transfer ◽  
Geometrical Nonlinearity ◽  
Three Dimensional ◽  
Geometrical Nonlinear ◽  
Static Aeroelasticity ◽  
Nonlinear Static ◽  
Linear And Nonlinear

Abstract A nonlinear static aeroelastic methodology based on the coupled CFD/CSD approach has been developed to study the geometrical nonlinear aeroelastic behaviors of high-aspect-ratio or multi-material flexible aerial vehicles under aerodynamic loads. The Reynolds-averaged Navier–Stokes solver combined with the three-dimensional finite-element nonlinear solver is used to perform the fluid-structure coupling simulation. The interpolation technique for data transfer between the aerodynamic and structural modules employs radial basis function algorithm as well as dynamic mesh deformation. A high-aspect-ratio structure with multi-material is modeled by the finite element method to investigate the effects of geometrical nonlinearity on the aeroelastic behavior. Numerical simulations of the linear and nonlinear static aeroelasticity were conducted at transonic regime with different angles of attack. By comparing the aeroelastic behaviors of linear and nonlinear structure, it shows that geometrical nonlinearity plays an important role for flexible high-aspect-ratio wings undergoing the large static aeroelastic deformation and should be taken into account in aeroelastic analysis for such structures.

scholarly journals Effect of ply angle on nonlinear static aeroelasticity of high-aspect-ratio composite wing

2020 ◽  
Vol 22 (4) ◽  
pp. 959-970
Author(s):  
Junli Wang ◽  
Shuai Lei ◽  
Tuolei Li ◽  
Wensheng Zhang ◽  
Zhigui Ren ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Static Aeroelasticity ◽  
Nonlinear Static ◽  
Composite Wing

Accelerating ion diffusion with unique three-dimensionally interconnected nanopores for self-membrane high-performance pseudocapacitors

Nanoscale ◽  
2017 ◽  
Vol 9 (46) ◽  
pp. 18311-18317 ◽  
Author(s):  
Yuan Gao ◽  
Yuanjing Lin ◽  
Zehua Peng ◽  
Qingfeng Zhou ◽  
Zhiyong Fan
Keyword(s):  
Aspect Ratio ◽  
Surface Area ◽  
Structural Stability ◽  
High Aspect Ratio ◽  
High Performance ◽  
Three Dimensional ◽  
Rate Capability ◽  
Large Surface Area ◽  
Nanoporous Structure ◽  
Ion Diffusion

Three-dimensional interconnected nanoporous structure (3-D INPOS) possesses high aspect ratio, large surface area, as well as good structural stability. Profiting from its unique interconnected architecture, the 3-D INPOS pseudocapacitor achieves a largely enhanced capacitance and rate capability.

scholarly journals Self-ordered nanospike porous alumina fabricated under a new regime by an anodizing process in alkaline media

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mana Iwai ◽  
Tatsuya Kikuchi ◽  
Ryosuke O. Suzuki
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Porous Alumina ◽  
Three Dimensional ◽  
Alkaline Media ◽  
Alkaline Electrolyte ◽  
Subsequent Formation ◽  
Interpore Distance ◽  
Wide Range ◽  
Ordered Porous

AbstractHigh-aspect ratio ordered nanomaterial arrays exhibit several unique physicochemical and optical properties. Porous anodic aluminum oxide (AAO) is one of the most typical ordered porous structures and can be easily fabricated by applying an electrochemical anodizing process to Al. However, the dimensional and structural controllability of conventional porous AAOs is limited to a narrow range because there are only a few electrolytes that work in this process. Here, we provide a novel anodizing method using an alkaline electrolyte, sodium tetraborate (Na2B4O7), for the fabrication of a high-aspect ratio, self-ordered nanospike porous AAO structure. This self-ordered porous AAO structure possesses a wide range of the interpore distance under a new anodizing regime, and highly ordered porous AAO structures can be fabricated using pre-nanotexturing of Al. The vertical pore walls of porous AAOs have unique nanospikes measuring several tens of nanometers in periodicity, and we demonstrate that AAO can be used as a template for the fabrication of nanomaterials with a large surface area. We also reveal that stable anodizing without the occurrence of oxide burning and the subsequent formation of uniform self-ordered AAO structures can be achieved on complicated three-dimensional substrates.

scholarly journals A structure-exploiting numbering algorithm for finite elements on extruded meshes, and its performance evaluation in Firedrake

2016 ◽  
Vol 9 (10) ◽  
pp. 3803-3815 ◽  
Author(s):  
Gheorghe-Teodor Bercea ◽  
Andrew T. T. McRae ◽  
David A. Ham ◽  
Lawrence Mitchell ◽  
Florian Rathgeber ◽  
...  
Keyword(s):  
Finite Element ◽  
Performance Evaluation ◽  
Finite Elements ◽  
Aspect Ratio ◽  
Three Dimensional ◽  
Data Layout ◽  
Element System ◽  
Continuous Galerkin ◽  
Performance Penalty ◽  
The Cost

Abstract. We present a generic algorithm for numbering and then efficiently iterating over the data values attached to an extruded mesh. An extruded mesh is formed by replicating an existing mesh, assumed to be unstructured, to form layers of prismatic cells. Applications of extruded meshes include, but are not limited to, the representation of three-dimensional high aspect ratio domains employed by geophysical finite element simulations. These meshes are structured in the extruded direction. The algorithm presented here exploits this structure to avoid the performance penalty traditionally associated with unstructured meshes. We evaluate the implementation of this algorithm in the Firedrake finite element system on a range of low compute intensity operations which constitute worst cases for data layout performance exploration. The experiments show that having structure along the extruded direction enables the cost of the indirect data accesses to be amortized after 10–20 layers as long as the underlying mesh is well ordered. We characterize the resulting spatial and temporal reuse in a representative set of both continuous-Galerkin and discontinuous-Galerkin discretizations. On meshes with realistic numbers of layers the performance achieved is between 70 and 90 % of a theoretical hardware-specific limit.

The Analyse on Stiffness Model of 3-PPSR Flexible Parallel Robot

2014 ◽  
Vol 716-717 ◽  
pp. 1643-1647
Author(s):  
Yu Liang Luan ◽  
Wei Bin Rong ◽  
Li Ning Sun
Keyword(s):  
Finite Element ◽  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Parallel Robot ◽  
Force Balance ◽  
Element Analysis ◽  
Flexible Hinge ◽  
Stiffness Model ◽  
The Finite Element Analysis ◽  
The Mathematical Model

In order to achieve greater workspace motion, it’s designed a high aspect ratio 3-PPSR flexible parallel robot, driven by a piezoelectric motor, connected by flexible hinges, which has the advantages of simple structure, non singular, seamless, high motion precision. Because of the stiffness of the system directly affecting the motion accuracy, load bearing performance, according to the characteristics of high aspect ratio flexible hinge, It’s established the mathematical model of flexible hinge through finite element method. Using method of integral stiffness, conbined coordination equation with force balance equation, the flexible stiffness model of system is obtained. Finally, through using Ansys, it’s confirmed the validity of the theoretical model by comparing of the theoretical stiffness model results with the finite element analysis of the model results, to provide a reliable guarantee for optimization and analysis of kinematics and dynamics of flexible parallel robot.

scholarly journals High-Aspect-Ratio Copper Via Filling Used for Three-Dimensional Chip Stacking

2003 ◽  
Vol 150 (6) ◽  
pp. G355 ◽  
Author(s):  
Jian-Jun Sun ◽  
Kazuo Kondo ◽  
Takuji Okamura ◽  
SeungJin Oh ◽  
Manabu Tomisaka ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
High Aspect Ratio ◽  
Three Dimensional
Sign in / Sign up

Export Citation Format

Share Document