scholarly journals Evaluation of Uncertainty of Phase Difference Determination in Presence of Bias

2016 ◽  
Vol 23 (4) ◽  
pp. 603-614 ◽  
Author(s):  
Lazar V. Saranovac ◽  
Nada M. Vučijak
Keyword(s):  
Measurement Uncertainty ◽  
Phase Difference ◽  
The Other ◽  
Real Signal ◽  
Measurement Systems ◽  
Comparison Of Results ◽  
Sinusoidal Signals

AbstractDetermination of the phase difference between two sinusoidal signals with noise components using samples of these signals is of interest in many measurement systems. The samples of signals are processed by one of many algorithms, such as 7PSF, UQDE and MSAL, to determine the phase difference. The phase difference result must be accompanied with estimation of the measurement uncertainty. The following issues are covered in this paper: the MSAL algorithm background, the ways of treating the bias influence on the phase difference result, comparison of results obtained by applying MSAL and the other mentioned algorithms to the same real signal samples, and evaluation of the uncertainty of the phase difference.

Determination of the lattice translation across {110} APBs in GaAs

1988 ◽  
Vol 46 ◽  
pp. 600-601
Author(s):  
D.R. Rasmussen ◽  
N.-H. Cho ◽  
C.B. Carter
Keyword(s):  
Grain Boundaries ◽  
Lower Energy ◽  
Antiphase Boundary ◽  
The Other ◽  
Boundary Structure ◽  
Interface Plane ◽  
Inversion Symmetry ◽  
High Angle ◽  
Equilibrium Distance

Domains in GaAs can exist which are related to one another by the inversion symmetry, i.e., the sites of gallium and arsenic in one domain are interchanged in the other domain. The boundary between these two different domains is known as an antiphase boundary [1], In the terminology used to describe grain boundaries, the grains on either side of this boundary can be regarded as being Σ=1-related. For the {110} interface plane, in particular, there are equal numbers of GaGa and As-As anti-site bonds across the interface. The equilibrium distance between two atoms of the same kind crossing the boundary is expected to be different from the length of normal GaAs bonds in the bulk. Therefore, the relative position of each grain on either side of an APB may be translated such that the boundary can have a lower energy situation. This translation does not affect the perfect Σ=1 coincidence site relationship. Such a lattice translation is expected for all high-angle grain boundaries as a way of relaxation of the boundary structure.

Determination of the Burgers vector of a dislocation in a Fe-Mn alloy by weak-beam image in HVEM

1978 ◽  
Vol 36 (1) ◽  
pp. 330-331
Author(s):  
Y. Ishida ◽  
H. Ishida ◽  
K. Kohra ◽  
H. Ichinose
Keyword(s):  
High Order ◽  
Simulation Technique ◽  
The Other ◽  
Image Simulation ◽  
Diffraction Vector ◽  
Burgers Vector ◽  
Weak Beam ◽  
Beam Image ◽  
Edge Component

IntroductionA simple and accurate technique to determine the Burgers vector of a dislocation has become feasible with the advent of HVEM. The conventional image vanishing technique(1) using Bragg conditions with the diffraction vector perpendicular to the Burgers vector suffers from various drawbacks; The dislocation image appears even when the g.b = 0 criterion is satisfied, if the edge component of the dislocation is large. On the other hand, the image disappears for certain high order diffractions even when g.b ≠ 0. Furthermore, the determination of the magnitude of the Burgers vector is not easy with the criterion. Recent image simulation technique is free from the ambiguities but require too many parameters for the computation. The weak-beam “fringe counting” technique investigated in the present study is immune from the problems. Even the magnitude of the Burgers vector is determined from the number of the terminating thickness fringes at the exit of the dislocation in wedge shaped foil surfaces.

Procedures for the Quantitative Determination of Autoprothrombin C

1962 ◽  
Vol 08 (03) ◽  
pp. 434-441 ◽  
Author(s):  
Edmond R Cole ◽  
Ewa Marciniak ◽  
Walter H Seegers
Keyword(s):  
Quantitative Determination ◽  
Plasma Sample ◽  
Quantitative Measure ◽  
The Other ◽  
Clotting Time ◽  
Bovine Plasma ◽  
Autoprothrombin C

SummaryTwo quantitative procedures for autoprothrombin C are described. In one of these purified prothrombin is used as a substrate, and the activity of autoprothrombin C can be measured even if thrombin is in the preparation. In this procedure a reaction mixture is used wherein the thrombin titer which develops in 20 minutes is proportional to the autoprothrombin C in the reaction mixture. A unit is defined as the amount which will generate 70 units of thrombin in the standardized reaction mixture. In the other method thrombin interferes with the result, because a standard bovine plasma sample is recalcified and the clotting time is noted. Autoprothrombin C shortens the clotting time, and the extent of this is a quantitative measure of autoprothrombin C activity.

Determination of Factor XIII Activity and of Factor XIII Inhibitors Using an Ammonium-Sensitive Electrode

1983 ◽  
Vol 50 (02) ◽  
pp. 563-566 ◽  
Author(s):  
P Hellstern ◽  
K Schilz ◽  
G von Blohn ◽  
E Wenzel
Keyword(s):  
Factor Xiii ◽  
Normal Subjects ◽  
The Other ◽  
Activity Measurement ◽  
Factor Xiii Deficiency ◽  
Assay Procedure ◽  
Stabilization Factor ◽  
Release Method ◽  
Sensitive Electrode

SummaryAn assay for rapid factor XIII activity measurement has been developed based on the determination of the ammonium released during fibrin stabilization. Factor XIII was activated by thrombin and calcium. Ammonium was measured by an ammonium-sensitive electrode. It was demonstrated that the assay procedure yields accurate and precise results and that factor XIII-catalyzed fibrin stabilization can be measured kinetically. The amount of ammonium released during the first 90 min of fibrin stabilization was found to be 7.8 ± 0.5 moles per mole fibrinogen, which is in agreement with the findings of other authors. In 15 normal subjects and in 15 patients suffering from diseases with suspected factor XIII deficiency there was a satisfactory correlation between the results obtained by the “ammonium-release-method”, Bohn’s method, and the immunological assay (r1 = 0.65; r2= 0.70; p<0.01). In 3 of 5 patients with paraproteinemias the values of factor XIII activity determined by the ammonium-release method were markedly lower than those estimated by the other methods. It could be shown that inhibitor mechanisms were responsible for these discrepancies.

Determination of the Number of Conserved Chromosomal Segments Between Species

Genetics ◽  
2001 ◽  
Vol 157 (3) ◽  
pp. 1387-1395 ◽  
Author(s):  
Sudhir Kumar ◽  
Sudhindra R Gadagkar ◽  
Alan Filipski ◽  
Xun Gu
Keyword(s):  
Statistical Approach ◽  
Common Ancestor ◽  
Chromosomal Rearrangements ◽  
Structural Similarity ◽  
The Other ◽  
Segment Length ◽  
Human Genomes ◽  
Genomic Divergence ◽  
Human And Mouse

AbstractGenomic divergence between species can be quantified in terms of the number of chromosomal rearrangements that have occurred in the respective genomes following their divergence from a common ancestor. These rearrangements disrupt the structural similarity between genomes, with each rearrangement producing additional, albeit shorter, conserved segments. Here we propose a simple statistical approach on the basis of the distribution of the number of markers in contiguous sets of autosomal markers (CSAMs) to estimate the number of conserved segments. CSAM identification requires information on the relative locations of orthologous markers in one genome and only the chromosome number on which each marker resides in the other genome. We propose a simple mathematical model that can account for the effect of the nonuniformity of the breakpoints and markers on the observed distribution of the number of markers in different conserved segments. Computer simulations show that the number of CSAMs increases linearly with the number of chromosomal rearrangements under a variety of conditions. Using the CSAM approach, the estimate of the number of conserved segments between human and mouse genomes is 529 ± 84, with a mean conserved segment length of 2.8 cM. This length is &lt;40% of that currently accepted for human and mouse genomes. This means that the mouse and human genomes have diverged at a rate of ∼1.15 rearrangements per million years. By contrast, mouse and rat are diverging at a rate of only ∼0.74 rearrangements per million years.

New advances in the method validation, extraction methods and measurement uncertainty for the determination of water-soluble hexavalent chromium in hydraulic cement

Talanta ◽  
2021 ◽  
Vol 232 ◽  
pp. 122286
Author(s):  
María Melania Ramírez-Quesada ◽  
Jimmy Venegas-Padilla ◽  
José Pablo Sibaja-Brenes ◽  
Bryan Calderón-Jiménez
Keyword(s):  
Measurement Uncertainty ◽  
Hexavalent Chromium ◽  
Method Validation ◽  
Extraction Methods ◽  
Water Soluble ◽  
Hydraulic Cement

scholarly journals Determination of the Height of Hard X-Ray Sources in the Solar Atmosphere by Measurement of Photospheric Albedo Photons

1975 ◽  
Vol 68 ◽  
pp. 239-241
Author(s):  
John C. Brown ◽  
H. F. Van Beek
Keyword(s):  
Solar Atmosphere ◽  
The Other ◽  
X Ray ◽  
Theoretical Predictions ◽  
Source Models ◽  
The One

SummaryThe importance and difficulties of determining the height of hard X-ray sources in the solar atmosphere, in order to distinguish source models, have been discussed by Brown and McClymont (1974) and also in this Symposium (Brown, 1975; Datlowe, 1975). Theoretical predictions of this height, h, range between and 105 km above the photosphere for different models (Brown and McClymont, 1974; McClymont and Brown, 1974). Equally diverse values have been inferred from observations of synchronous chromospheric EUV bursts (Kane and Donnelly, 1971) on the one hand and from apparently behind-the-limb events (e.g. Datlowe, 1975) on the other.

Determination of Sulfaquinoxaline, Sulfathiazole, Sulfamerazine, and Sulfamethazine in Feed Concentrates or Premixes

1973 ◽  
Vol 56 (6) ◽  
pp. 1475-1479 ◽  
Author(s):  
Ugo R Cieri
Keyword(s):  
Silica Gel ◽  
The Other ◽  
Uv Absorbance ◽  
The Individual

Abstract Sulfaquinoxaline is determined by its UV absorbance at about 358 nm, where the other 3 sulfonamides do not absorb. Sulfathiazole, sulfamerazine, and sulfamethazine are determined by a quantitative TLC procedure, based on the separation of the compounds on silica gel plates; the spots are extracted and the centrifuged extracts are analyzed spectro-photometrically. A method of calculating the total sulfonamide content, independent of the individual components, is also introduced.

Sign in / Sign up

Export Citation Format

Share Document