scholarly journals EN AW-2024 Wrought Aluminum Alloy Processed by Casting with Crystallization under Pressure

2017 ◽  
Vol 67 (2) ◽  
pp. 109-116
Author(s):  
Branislav Vanko ◽  
Ladislav Stanček ◽  
Roman Moravčík
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Shrinkage Porosity ◽  
Forced Flow ◽  
Heat Treated ◽  
Crystallization Under Pressure ◽  
Wrought Aluminum Alloys ◽  
Wrought Aluminum

AbstractBy using the wrought aluminum alloys can be created castings with higher mechanical properties than the castings made of standard foundry aluminum alloys, but it is necessary to handle the process of making sound castings without any defects such as hot tears and shrinkage porosity. In experiments, we have been studied of wrought aluminum alloy EN AW-2024 which has been processed by the casting with crystallization under pressure with forced flow. Castings were heat treated by standard T6 heat treatment.

Wrought Aluminum Alloy: Reinforcement, Alloy Addition, and Deformation Effects on Mechanical Responses

2019 ◽  
Author(s):  
Samson Oluropo Adeosun ◽  
E. I. Akpan ◽  
S. A. Balogun
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Silicon Carbide ◽  
Aluminum Alloy ◽  
Aluminum Alloys ◽  
Good Prospect ◽  
Reinforcing Particles ◽  
Alloy Addition ◽  
Wrought Aluminum Alloys ◽  
Wrought Aluminum

This article discusses the effects of various modifications on the properties of aluminum alloys for structural applications. The effect of reinforcing particles on the mechanical properties of wrought 6063 aluminum alloy arising from our previous works is extensively discussed to identify the most promising reinforcing particles. It also discusses the improvement in mechanical properties of 1200 aluminum alloy using silicon carbide particulates. The effect of micro-alloy additions on the mechanical properties is also outlined in this article based on the results from our previous experimental works. Effect of combining heat treatment and deformation on the mechanical properties of wrought aluminum alloys is also presented. Results presented show that particle reinforcement, deformation, and microelemental additions to aluminum alloy result in significant improvement in mechanical properties of the alloys considered. Addition of reinforcing particles of barite, silicon carbide, iron fillings, and electric arc furnace dust are found to impart improved tensile strength to aluminum alloy. The most outstanding finding is that synergy between particle addition, deformation, and heat treatment has a good prospect in the production of improved aluminum alloy materials for automotive applications.

scholarly journals Properties of EN AW-2024 Wrought Aluminum Alloy after Casting with Crystallization under Pressure

2015 ◽  
Vol 23 (1) ◽  
pp. 58-65
Author(s):  
Branislav Vanko ◽  
Ladislav Stanček ◽  
Michal Čeretka ◽  
Eduard Sedláček ◽  
Roman Moravčík
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloys ◽  
Production Costs ◽  
Global Trend ◽  
Complex Shapes ◽  
Crystallization Under Pressure ◽  
Casting Aluminum ◽  
Wrought Aluminum Alloys ◽  
Wrought Aluminum ◽  
Lower Production

Abstract Establishing of wrought aluminum alloys casting to manufacture is now a global trend, for example due to lower production costs compare to forging or due to the ability to produce parts with thinner sections and more complex shapes. The aim of using these alloys in the foundry industry is in particular the creation of castings with higher mechanical properties than achieve castings made of standard casting aluminum alloys. Most often are cast wrought aluminum alloys of the 2xxx, 6xxx and 7xxx series. In the experiment, an alloy EN AW-2024 has been cast by modified technology of casting with crystallization under pressure. They were measured basic mechanical properties of the castings in the as-cast state and after heat treatment.

Mechanical Properties and Microstructure of Aluminum Alloy Al-6061 Obtained by the Liquid Forging Process

2010 ◽  
Vol 654-656 ◽  
pp. 1420-1423 ◽  
Author(s):  
Chun Wei Su ◽  
Peng Hooi Oon ◽  
Y.H. Bai ◽  
Anders W.E. Jarfors
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
Treatment Process ◽  
Forging Process ◽  
Al 6061 ◽  
Casting Alloys ◽  
Suitable Heat Treatment ◽  
Structural Applications ◽  
Wrought Aluminum

The liquid forging process has the flexibilities of casting in forming intricate profiles and features while imparting the liquid forged components with superior mechanical strength compared to similar components obtained via casting. Additionally, liquid forging requires significantly lower machine loads compared to solid forming processes. Currently, components that are formed by liquid forging are usually casting alloys of aluminum. This paper investigates the suitability of liquid forging a wrought aluminum alloy Al-6061 and the mechanical properties after forming. The proper handling of the Al-6061 alloy in its molten state is important in minimizing oxidation of its alloying elements. By maintaining the correct alloying composition of Al-6061 after liquid forging, these Al-6061 samples can subsequently undergo a suitable heat treatment process to significantly improve their yield strengths. Results show that the yield strengths of these liquid forged Al-6061 samples can be increased from about 90MPa, when they are in the as-liquid forged state, to about 275MPa after heat treatment. This improved yield strength is comparable to that of Al-6061 samples obtained by solid forming processes. As such, the liquid forging process here has been shown to be capable of forming wrought aluminum alloy components that has the potential for structural applications.

Characterization of Microstructure and Mechanical Properties of 6060 Aluminum Alloy Processed by ECAP

2018 ◽  
Vol 275 ◽  
pp. 81-88
Author(s):  
Monika Karoń ◽  
Marcin Adamiak
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Aluminum Alloy ◽  
Internal Stresses ◽  
Refined Grains ◽  
Angular Pressing ◽  
Heat Treated ◽  
Evolution Of Microstructure

The purpose of this paper is to present the microstructure and mechanical behavior of 6060 aluminum alloy after intense plastic deformation. Equal Channel Angular Pressing (ECAP) was used as a method of severe plastic deformation. Before ECAP part of the samples were heat treated to remove internal stresses in the commercially available aluminium alloy. The evolution of microstructure and tensile strength were tested after 1, 3, 6 and 9 ECAP passes in annealed and non annealed states. It was found that intensely plastically deformed refined grains were present in the tested samples and exhibited increased mechanical properties. Differences were noted between samples without and after heat treatment

scholarly journals Experimental Investigation and Optimization of the Semisolid Multicavity Squeeze Casting Process for Wrought Aluminum Alloy Scroll

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5278
Author(s):  
Yi Guo ◽  
Yongfei Wang ◽  
Shengdun Zhao
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Tensile Strength ◽  
Aluminum Alloy ◽  
Process Parameters ◽  
Squeeze Casting ◽  
Shrinkage Porosity ◽  
Optimal Process ◽  
Squeeze Pressure ◽  
Wrought Aluminum

Scroll compressors are popularly applied in air-conditioning systems. The conventional fabrication process causes gas and shrinkage porosity in the scroll. In this paper, the electromagnetic stirring (EMS)-based semisolid multicavity squeeze casting (SMSC) process is proposed for effectively manufacturing wrought aluminum alloy scrolls. Insulation temperature, squeeze pressure, and the treatment of the micromorphology and mechanical properties of the scroll were investigated experimentally. It was found that reducing the insulation temperature can decrease the grain size, increase the shape factor, and improve mechanical properties. The minimum grain size was found as 111 ± 3 μm at the insulation temperature of 595 °C. The maximum tensile strength, yield strength, and hardness were observed as 386 ± 8 MPa, 228 ± 5 MPa, and 117 ± 5 HV, respectively, at the squeeze pressure of 100 MPa. The tensile strength and hardness of the scroll could be improved, and the elongation was reduced by the T6 heat treatment. The optimal process parameters are recommended at an insulation temperature in the range of 595–600 °C and a squeeze pressure of 100 MPa. Under the optimal process parameters, scroll casting was completely filled, and there was no obvious shrinkage defect observed inside. Its microstructure is composed of fine and spherical grains.

scholarly journals Post-Machining Deformations of Thin-Walled Elements Made of EN AW-2024 T351 Aluminum Alloy as Regards the Mechanical Properties of the Applied, Rolled Semi-Finished Products

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7591
Author(s):  
Magdalena Zawada-Michałowska ◽  
Paweł Pieśko
Keyword(s):  
Mechanical Properties ◽  
Surface Layer ◽  
Aluminum Alloy ◽  
Rolling Direction ◽  
Sample Thickness ◽  
Textured Surface ◽  
Thin Walled ◽  
Wrought Aluminum Alloys ◽  
Wrought Aluminum ◽  
Tension Direction

The paper presents an evaluation of post-machining deformations of thin-walled elements as regards the mechanical properties of the applied, rolled semi-finished products. Nowadays, wrought aluminum alloys, supplied primarily in the form of rolled plates, are widely applied in the production of thin-walled integral parts. Considering the high requirements for materials, especially in the aviation sector, it is important to be aware of their mechanical properties and for semi-finished products delivered after plastic working to take into account the so-called “technological history” concerning, inter alia, the direction of rolling. The study focused on determining the influence of the ratio of the tension direction to the rolling direction on the selected mechanical properties of the EN AW-2024 T351 aluminum alloy depending on the sample thickness and its relation to the deformation of thin-walled parts. Based on the obtained results, it was found that the sample thickness and the ratio of the tension direction to the rolling direction affected the mechanical properties of the selected aluminum alloy, which in turn translated into post-machining deformations. Summarizing, the textured surface layer had a significant impact on the mentioned deformation. Greater deformations were noted for samples made of a semi-finished product with a thickness of 5 mm in comparison to 12 mm. It was the result of the influence of the surface layer, which at lower thickness had a higher percentage of contents than in thicker samples.

Investigation of the joinability of the high-strength aluminum alloy AA7075 in shear-clinching processes

2021 ◽  
pp. 146442072110679
Author(s):  
S Wiesenmayer ◽  
M Merklein
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
High Strength ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
High Strength Aluminum Alloy ◽  
Heat Treated ◽  
Strength Alloy ◽  
Heating Up

Shear-clinching has proven to be a suitable technology for joining of high-strength materials. However, the mechanical properties of the upper joining partner are limited due to the high strains, which occur during the process. Therefore, shear-clinching of the high-strength aluminum alloy AA7075 in the T6 temper is not possible. Yet, the mechanical properties of hardenable alloys of the 7000 series can be influenced by a heat treatment. Thus, within the scope of this work, the joinability of the high-strength alloy AA7075 in shear-clinching processes in dependance of its temper is investigated. The as fabricated state F, the artificially aged T6 temper, a paint baked state and the naturally aged T4 temper are compared to the fully solution annealed W temper as well as to a retrogression heat-treated state. For retrogression heat treatment, a laser is used as heat source, heating up the alloy for a short term in order to only partially dissolve precipitations. The resulting mechanical properties are determined with uniaxial tensile tests. Moreover, the influence of the mechanical properties of AA7075 on the shear-clinching process, the joint formation and the resulting joint strength is analyzed.

Sign in / Sign up

Export Citation Format

Share Document