Active fault tolerant control of turbofan engines with actuator faults under disturbances

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Yan-Hua Ma ◽  
Xian Du ◽  
Lin-Feng Gou ◽  
Si-Xin Wen
Keyword(s):  
Active Fault ◽  
Fault Tolerant ◽  
Fault Tolerant Control ◽  
Feedback Controller ◽  
Actuator Faults ◽  
Error Feedback ◽  
Turbofan Engine ◽  
Turbofan Engines ◽  
Interval Observer ◽  
State Error

AbstractIn this paper, an active fault-tolerant control (FTC) scheme for turbofan engines subject to simultaneous multiplicative and additive actuator faults under disturbances is proposed. First, a state error feedback controller is designed based on interval observer as the nominal controller in order to achieve the model reference rotary speed tracking control for the fault-free turbofan engine under disturbances. Subsequently, a virtual actuator based reconfiguration block is developed aiming at preserving the consistent performance in spite of the occurrence of the simultaneous multiplicative and additive actuator faults. Moreover, to improve the performance of the FTC system, the interval observer is slightly modified without reconstruction of the state error feedback controller. And a theoretical sufficiency criterion is provided to ensure the stability of the proposed active FTC system. Simulation results on a turbofan engine indicate that the proposed active FCT scheme is effective despite of the existence of actuator faults and disturbances.

Active fault tolerant control of turbofan engines with actuator faults under disturbances

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Yan-Hua Ma ◽  
Xian Du ◽  
Lin-Feng Gou ◽  
Si-Xin Wen
Keyword(s):  
Active Fault ◽  
Fault Tolerant ◽  
Fault Tolerant Control ◽  
Feedback Controller ◽  
Actuator Faults ◽  
Error Feedback ◽  
Turbofan Engine ◽  
Turbofan Engines ◽  
Interval Observer ◽  
State Error

Abstract In this paper, an active fault-tolerant control (FTC) scheme for turbofan engines subject to simultaneous multiplicative and additive actuator faults under disturbances is proposed. First, a state error feedback controller is designed based on interval observer as the nominal controller in order to achieve the model reference rotary speed tracking control for the fault-free turbofan engine under disturbances. Subsequently, a virtual actuator based reconfiguration block is developed aiming at preserving the consistent performance in spite of the occurrence of the simultaneous multiplicative and additive actuator faults. Moreover, to improve the performance of the FTC system, the interval observer is slightly modified without reconstruction of the state error feedback controller. And a theoretical sufficiency criterion is provided to ensure the stability of the proposed active FTC system. Simulation results on a turbofan engine indicate that the proposed active FCT scheme is effective despite of the existence of actuator faults and disturbances.

Adaptive Observer-Based Integrated Fault Diagnosis and Fault-Tolerant Control Systems Against Actuator Faults and Saturation

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Jinhua Fan ◽  
Youmin Zhang ◽  
Zhiqiang Zheng
Keyword(s):  
Fault Diagnosis ◽  
Control Systems ◽  
Fault Tolerant ◽  
Fault Tolerant Control ◽  
Feedback Controller ◽  
Adaptive Observer ◽  
Pole Placement ◽  
Design Parameters ◽  
Feedback Gain ◽  
Actuator Faults

A challenging problem on observer-based, integrated fault diagnosis and fault-tolerant control for linear systems subject to actuator faults and control input constraints is studied in this paper. An adaptive observer approach is used for the joint state-fault magnitude estimation, and a feedback controller is designed to stabilize the closed-loop system without violating the actuator limits in the presence of actuator faults. Matrix inequality conditions are provided for computation of design parameters of the observer and the feedback controller, and the admissible initial conditions and estimation errors are bounded by invariant ellipsoidal sets. The design results are closely related to the fault magnitude and variation rate, and a necessary condition on the admissible fault magnitudes dependent on the control limits is directly obtained from the design process. The proposed design framework allows a direct application of the pole placement method to obtain stabilization results. To improve the system performance, a nonlinear programming-based optimization algorithm is proposed to compute an optimized feedback gain, whereas the one obtained by pole placement can be taken as an initial feasible solution for nonlinear optimization. Numerical studies with two flight control systems demonstrate the effectiveness of proposed design techniques.

scholarly journals Active Fault-Tolerant Control of a Quadcopter against Time-Varying Actuator Faults and Saturations Using Sliding Mode Backstepping Approach

2019 ◽  
Vol 9 (19) ◽  
pp. 4010 ◽  
Author(s):  
Ngoc Phi Nguyen ◽  
Sung Kyung Hong
Keyword(s):  
Fault Diagnosis ◽  
Active Fault ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
Fault Tolerant Control ◽  
Lyapunov Theory ◽  
Fault Estimation ◽  
Time Varying ◽  
Actuator Faults ◽  
Active Fault Tolerant Control

Fault-tolerant control is becoming an interesting topic because of its reliability and safety. This paper reports an active fault-tolerant control method for a quadcopter unmanned aerial vehicle (UAV) to handle actuator faults, disturbances, and input constraints. A robust fault diagnosis based on the H ∞ scheme was designed to estimate the magnitude of a time-varying fault in the presence of disturbances with unknown upper bounds. Once the fault estimation was complete, a fault-tolerant control scheme was proposed for the attitude system, using adaptive sliding mode backstepping control to accommodate the actuator faults, despite actuator saturation limitation and disturbances. The Lyapunov theory was applied to prove the robustness and stability of the closed-loop system under faulty operation. Simulation results show the effectiveness of the fault diagnosis scheme and proposed controller for handling actuator faults.

scholarly journals Fault Diagnosis and Fault-Tolerant Control Scheme for Quadcopter UAVs with a Total Loss of Actuator

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1139 ◽  
Author(s):  
Ngoc Nguyen ◽  
Sung Hong
Keyword(s):  
Fault Diagnosis ◽  
Active Fault ◽  
Control Method ◽  
Fault Tolerant ◽  
Sliding Mode ◽  
Fault Tolerant Control ◽  
Total Loss ◽  
Actuator Faults ◽  
Control Scheme ◽  
Robust Adaptive

Fault-tolerant control has drawn attention in recent years owning to its reliability and safe flight during missions. In this article, an active fault-tolerant control method is proposed to control a quadcopter in the presence of actuator faults and disturbances. Firstly, the dynamics of the quadcopter are presented. Secondly, a robust adaptive sliding mode Thau observer is presented to estimate the time-varying magnitudes of actuator faults. Thirdly, a fault-tolerant control scheme based on sliding mode control and reconfiguration technique is designed to maintain the quadcopter at the desired position despite the presence of faults. Unlike previous studies, the proposed method aims to integrate the fault diagnosis and a fault-tolerant control scheme into a single unit with total loss of actuator. Simulation results illustrate the efficiency of the suggested algorithm.

Sign in / Sign up

Export Citation Format

Share Document