Computation of the Trailing Edge Flow Downstream A Flat Plate with Finite Thickness

1989 ◽  
Vol 6 (1) ◽  
Author(s):  
E.I. Elbialy ◽  
A.M. Mobarak ◽  
M.A. Serag-Eldin
1998 ◽  
Vol 33 (1) ◽  
pp. 135-139
Author(s):  
S. F. Konovalov ◽  
Yu. A. Lashkov ◽  
V. V. Mikhailov

Mathematika ◽  
1969 ◽  
Vol 16 (1) ◽  
pp. 106-121 ◽  
Author(s):  
K. Stewartson
Keyword(s):  

1971 ◽  
Vol 46 (3) ◽  
pp. 569-576
Author(s):  
C. J. Wood

An experiment has been performed, using pulsed dye injection on an aerofoil in a Hele-Shaw cell. The purpose was to observe the form of the trailing-edge flow when the Reynolds number was high enough to permit separation and the initiation of a Kutta condition. The experiment provides a successful confirmation of the existence of a ‘viscous tail’ as predicted by Buckmaster (1970) although there is an unexplained quantitative discrepancy.


2015 ◽  
Vol 779 ◽  
pp. 751-775 ◽  
Author(s):  
K. B. M. Q. Zaman ◽  
A. F. Fagan ◽  
J. E. Bridges ◽  
C. A. Brown

The interaction between an 8:1 aspect ratio rectangular jet and a flat plate, placed parallel to the jet, is addressed in this study. At high subsonic conditions and for certain relative locations of the plate, a resonance takes place with accompanying audible tones. Even when the tone is not audible the sound pressure level spectra are often marked by conspicuous peaks. The frequencies of these peaks, as functions of the plate’s length, its location relative to the jet as well as jet Mach number, are studied in an effort to understand the flow mechanism. It is demonstrated that the tones are not due to a simple feedback between the nozzle exit and the plate’s trailing edge; the leading edge also comes into play in determining the frequency. With parametric variation, it is found that there is an order in the most energetic spectral peaks; their frequencies cluster in distinct bands. The lowest frequency band is explained by an acoustic feedback involving diffraction at the plate’s leading edge. Under the resonant condition, a periodic flapping motion of the jet column is seen when viewed in a direction parallel to the plate. Phase-averaged Mach number data on a cross-stream plane near the plate’s trailing edge illustrate that the jet cross-section goes through large contortions within the period of the tone. Farther downstream a clear ‘axis switching’ takes place for the time-averaged cross-section of the jet that does not occur otherwise for a non-resonant condition.


It is shown that the boundary layer approximation to the flow of a viscous fluid past a flat plate of length l , generally valid near the plate when the Reynolds number Re is large, fails within a distance O( lRe -3/4 ) of the trailing edge. The appropriate governing equations in this neighbourhood are the full Navier- Stokes equations. On the basis of Imai (1966) these equations are linearized with respect to a uniform shear and are then completely solved by means of a Wiener-Hopf integral equation. The solution so obtained joins smoothly on to that of the boundary layer for a flat plate upstream of the trailing edge and for a wake downstream of the trailing edge. The contribution to the drag coefficient is found to be O ( Re -3/4 ) and the multiplicative constant is explicitly worked out for the linearized equations.


2021 ◽  
Author(s):  
Bastav Borah ◽  
Anand Verma ◽  
Vinayak Kulkarni ◽  
Ujjwal K. Saha

Abstract Vortex shedding phenomenon leads to a number of different features such as flow induced vibrations, fluid mixing, heat transfer and noise generation. With respect to aerodynamic application, the intensity of vortex shedding and the size of vortices play an essential role in the generation of lift and drag forces on an airfoil. The flat plates are known to have a better lift-to-drag ratio than conventional airfoils at low Reynolds number (Re). A better understanding of the shedding behavior will help aerodynamicists to implement flat plates at low Re specific applications such as fixed-wing micro air vehicle (MAV). In the present study, the shedding of vortices in the wake of a flat plate at low incidence has been studied experimentally in a low-speed subsonic wind tunnel at a Re of 5 × 104. The velocity field in the wake of the plate is measured using a hot wire anemometer. These measurements are taken at specific points in the wake across the flow direction and above the suction side of the flat plate. The velocity field is found to oscillate with one dominant frequency of fluctuation. The Strouhal number (St), calculated from this frequency, is computed for different angles of attack (AoA). The shedding frequency of vortices from the trailing edge of the flat plate has a general tendency to increase with AoA. In this paper, the generation and subsequent shedding of leading edge and trailing edge vortices in the wake of a flat plate are discussed.


Sign in / Sign up

Export Citation Format

Share Document