scholarly journals Fingerprint Recognition System Using Artificial Neural Network as Feature Extractor: Design and Performance Evaluation

2016 ◽  
Vol 67 (1) ◽  
pp. 117-134 ◽  
Author(s):  
Pavol Marák ◽  
Alexander Hambalík

Abstract Performance of modern automated fingerprint recognition systems is heavily influenced by accuracy of their feature extraction algorithm. Nowadays, there are more approaches to fingerprint feature extraction with acceptable results. Problems start to arise in low quality conditions where majority of the traditional methods based on analyzing texture of fingerprint cannot tackle this problem so effectively as artificial neural networks. Many papers have demonstrated uses of neural networks in fingerprint recognition, but there is a little work on using them as Level-2 feature extractors. Our goal was to contribute to this field and develop a novel algorithm employing neural networks as extractors of discriminative Level-2 features commonly used to match fingerprints. In this work, we investigated possibilities of incorporating artificial neural networks into fingerprint recognition process, implemented and documented our own software solution for fingerprint identification based on neural networks whose impact on feature extraction accuracy and overall recognition rate was evaluated. The result of this research is a fully functional software system for fingerprint recognition that consists of fingerprint sensing module using high resolution sensor, image enhancement module responsible for image quality restoration, Level-1 and Level-2 feature extraction module based on neural network, and finally fingerprint matching module using the industry standard BOZORTH3 matching algorithm. For purposes of evaluation we used more fingerprint databases with varying image quality, and the performance of our system was evaluated using FMR/FNMR and ROC indicators. From the obtained results, we may draw conclusions about a very positive impact of neural networks on overall recognition rate, specifically in low quality.

2016 ◽  
Author(s):  
Serrano Pereira ◽  
Barbara Gravendeel ◽  
Patrick Wijntjes ◽  
Rutger A. Vos

ABSTRACTTaxonomic expertise for the identification of species is rare and costly. On-going advances in computer vision and machine learning have led to the development of numerous semi- and fully automated species identification systems. However, these systems are rarely agnostic to specific morphology, rarely can perform taxonomic “approximation” (by which we mean partial identification at least to higher taxonomic level if not to species), and frequently rely on costly scientific imaging technologies. We present a generic, hierarchical identification system for automated taxonomic approximation of organisms from images. We assessed the effectiveness of this system using photographs of slipper orchids (Cypripedioideae), for which we implemented image pre-processing, segmentation, and colour and shape feature extraction algorithms to obtain digital phenotypes for 116 species. The identification system trained on these digital phenotypes uses a nested hierarchy of artificial neural networks for pattern recognition and automated classification that mirrors the Linnean taxonomy, such that user-submitted photos can be assigned a genus, section, and species classification by traversing this hierarchy. Performance of the identification system varied depending on photo quality, number of species included for training, and desired taxonomic level for identification. High quality photos were scarce for some taxa and were under-represented in the training set, resulting in imbalanced network training. The image features used for training were sufficient to reliably identify photos to the correct genus but less so to the correct section and species. The outcomes of this project include a library of feature extraction algorithms called ImgPheno, a collection of scripts for neural network training called NBClassify, a library for evolutionary optimization of artificial neural network construction called AI::FANN::Evolving and a planned web application called OrchID for identification of user-submitted images. All project outcomes are open source and freely available.


Biomolecules ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 500
Author(s):  
László Keresztes ◽  
Evelin Szögi ◽  
Bálint Varga ◽  
Viktor Farkas ◽  
András Perczel ◽  
...  

The amyloid state of proteins is widely studied with relevance to neurology, biochemistry, and biotechnology. In contrast with nearly amorphous aggregation, the amyloid state has a well-defined structure, consisting of parallel and antiparallel β-sheets in a periodically repeated formation. The understanding of the amyloid state is growing with the development of novel molecular imaging tools, like cryogenic electron microscopy. Sequence-based amyloid predictors were developed, mainly using artificial neural networks (ANNs) as the underlying computational technique. From a good neural-network-based predictor, it is a very difficult task to identify the attributes of the input amino acid sequence, which imply the decision of the network. Here, we present a linear Support Vector Machine (SVM)-based predictor for hexapeptides with correctness higher than 84%, i.e., it is at least as good as the best published ANN-based tools. Unlike artificial neural networks, the decisions of the linear SVMs are much easier to analyze and, from a good predictor, we can infer rich biochemical knowledge. In the Budapest Amyloid Predictor webserver the user needs to input a hexapeptide, and the server outputs a prediction for the input plus the 6 × 19 = 114 distance-1 neighbors of the input hexapeptide.


Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 18
Author(s):  
Rahel Jedamski ◽  
Jérémy Epp

Non-destructive determination of workpiece properties after heat treatment is of great interest in the context of quality control in production but also for prevention of damage in subsequent grinding process. Micromagnetic methods offer good possibilities, but must first be calibrated with reference analyses on known states. This work compares the accuracy and reliability of different calibration methods for non-destructive evaluation of carburizing depth and surface hardness of carburized steel. Linear regression analysis is used in comparison with new methods based on artificial neural networks. The comparison shows a slight advantage of neural network method and potential for further optimization of both approaches. The quality of the results can be influenced, among others, by the number of teaching steps for the neural network, whereas more teaching steps does not always lead to an improvement of accuracy for conditions not included in the initial calibration.


Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 47
Author(s):  
Vasyl Teslyuk ◽  
Artem Kazarian ◽  
Natalia Kryvinska ◽  
Ivan Tsmots

In the process of the “smart” house systems work, there is a need to process fuzzy input data. The models based on the artificial neural networks are used to process fuzzy input data from the sensors. However, each artificial neural network has a certain advantage and, with a different accuracy, allows one to process different types of data and generate control signals. To solve this problem, a method of choosing the optimal type of artificial neural network has been proposed. It is based on solving an optimization problem, where the optimization criterion is an error of a certain type of artificial neural network determined to control the corresponding subsystem of a “smart” house. In the process of learning different types of artificial neural networks, the same historical input data are used. The research presents the dependencies between the types of neural networks, the number of inner layers of the artificial neural network, the number of neurons on each inner layer, the error of the settings parameters calculation of the relative expected results.


Author(s):  
M. A. Rafe Biswas ◽  
Melvin D. Robinson

A direct methanol fuel cell can convert chemical energy in the form of a liquid fuel into electrical energy to power devices, while simultaneously operating at low temperatures and producing virtually no greenhouse gases. Since the direct methanol fuel cell performance characteristics are inherently nonlinear and complex, it can be postulated that artificial neural networks represent a marked improvement in performance prediction capabilities. Artificial neural networks have long been used as a tool in predictive modeling. In this work, an artificial neural network is employed to predict the performance of a direct methanol fuel cell under various operating conditions. This work on the experimental analysis of a uniquely designed fuel cell and the computational modeling of a unique algorithm has not been found in prior literature outside of the authors and their affiliations. The fuel cell input variables for the performance analysis consist not only of the methanol concentration, fuel cell temperature, and current density, but also the number of cells and anode flow rate. The addition of the two typically unconventional variables allows for a more distinctive model when compared to prior neural network models. The key performance indicator of our neural network model is the cell voltage, which is an average voltage across the stack and ranges from 0 to 0:8V. Experimental studies were carried out using DMFC stacks custom-fabricated, with a membrane electrode assembly consisting of an additional unique liquid barrier layer to minimize water loss through the cathode side to the atmosphere. To determine the best fit of the model to the experimental cell voltage data, the model is trained using two different second order training algorithms: OWO-Newton and Levenberg-Marquardt (LM). The OWO-Newton algorithm has a topology that is slightly different from the topology of the LM algorithm by the employment of bypass weights. It can be concluded that the application of artificial neural networks can rapidly construct a predictive model of the cell voltage for a wide range of operating conditions with an accuracy of 10−3 to 10−4. The results were comparable with existing literature. The added dimensionality of the number of cells provided insight into scalability where the coefficient of the determination of the results for the two multi-cell stacks using LM algorithm were up to 0:9998. The model was also evaluated with empirical data of a single-cell stack.


2014 ◽  
Vol 38 (6) ◽  
pp. 1681-1693 ◽  
Author(s):  
Braz Calderano Filho ◽  
Helena Polivanov ◽  
César da Silva Chagas ◽  
Waldir de Carvalho Júnior ◽  
Emílio Velloso Barroso ◽  
...  

Soil information is needed for managing the agricultural environment. The aim of this study was to apply artificial neural networks (ANNs) for the prediction of soil classes using orbital remote sensing products, terrain attributes derived from a digital elevation model and local geology information as data sources. This approach to digital soil mapping was evaluated in an area with a high degree of lithologic diversity in the Serra do Mar. The neural network simulator used in this study was JavaNNS and the backpropagation learning algorithm. For soil class prediction, different combinations of the selected discriminant variables were tested: elevation, declivity, aspect, curvature, curvature plan, curvature profile, topographic index, solar radiation, LS topographic factor, local geology information, and clay mineral indices, iron oxides and the normalized difference vegetation index (NDVI) derived from an image of a Landsat-7 Enhanced Thematic Mapper Plus (ETM+) sensor. With the tested sets, best results were obtained when all discriminant variables were associated with geological information (overall accuracy 93.2 - 95.6 %, Kappa index 0.924 - 0.951, for set 13). Excluding the variable profile curvature (set 12), overall accuracy ranged from 93.9 to 95.4 % and the Kappa index from 0.932 to 0.948. The maps based on the neural network classifier were consistent and similar to conventional soil maps drawn for the study area, although with more spatial details. The results show the potential of ANNs for soil class prediction in mountainous areas with lithological diversity.


2020 ◽  
Vol 8 (4) ◽  
pp. 469
Author(s):  
I Gusti Ngurah Alit Indrawan ◽  
I Made Widiartha

Artificial Neural Networks or commonly abbreviated as ANN is one branch of science from the field of artificial intelligence which is often used to solve various problems in fields that involve grouping and pattern recognition. This research aims to classify Letter Recognition datasets using Artificial Neural Networks which are weighted optimally using the Artificial Bee Colony algorithm. The best classification accuracy results from this study were 92.85% using a combination of 4 hidden layers with each hidden layer containing 10 neurons.


Sign in / Sign up

Export Citation Format

Share Document