The complete series of sodium rare-earth metal(III) chloride oxotellurates(IV) Na2RE3Cl3[TeO3]4 (RE = Y, La–Nd, Sm–Lu)

2020 ◽  
Vol 235 (8-9) ◽  
pp. 341-352
Author(s):  
Stefan Greiner ◽  
Sabine Zitzer ◽  
Sabine Strobel ◽  
Peter S. Berdonosov ◽  
Thomas Schleid

AbstractThe complete series of sodium rare-earth metal(III) chloride oxotellurates(IV) with the composition Na2RE3Cl3[TeO3]4 (RE = Y, La–Nd, Sm–Lu) has been synthesized via solid-state reactions. For these conversions mixtures of the respective rare-earth metal(III) oxides, tellurium dioxide and sodium chloride as flux and reactant were prepared, intimately ground and heated for 5 days at 1225 K. The almost colorless single crystals were characterized via single-crystal X-ray diffractometry. In the monoclinic crystal structure of these compounds two crystallographically different rare-earth metal(III), but only one sodium cation sites occur. [REO8]13− polyhedra around both RE3+ positions as well as sodium-centered polyhedra [NaO4Cl4]8− form layers via different connectivity modes. These layers spread out parallel to the (001) plane and arrange alternatingly resulting in the three-dimensional network of the Na2RE3Cl3[TeO3]4 structure, where the Te4+ lone-pair cations at two different sites work as linkers by forming isolated ψ1-tetrahedra [TeO3]2−. Some of these compounds were represented before in different settings of space group C2/c. Now the complete series of the Na2RE3Cl3[TeO3]4 representatives with RE = Y, La–Nd, Sm–Lu is described consistently for a better comparison and understanding. Additionally, a single crystal of Na2Pr3Cl3[TeO3]4 was measured via energy dispersive X-ray analysis to verify the included elements, powder samples of Na2Nd3Cl3[TeO3]4 were characterized by X-ray diffractometer data for a phase-purity check and a single-crystal Raman spectrum of Na2Yb3Cl3[TeO3]4 served for proving the signature of discrete [TeO3]2− anions.

2005 ◽  
Vol 60 (3) ◽  
pp. 265-270 ◽  
Author(s):  
Rainer Kraft ◽  
Rainer Pöttgen

The rare earth metal (RE)-magnesium-thallides REMgTl (RE = Y, La-Nd, Sm, Gd-Tm, Lu) were prepared from the elements in sealed tantalum tubes in a water-cooled sample chamber of a high-frequency furnace. The thallides were characterized through their X-ray powder patterns. They crystallize with the hexagonal ZrNiAl type structure, space group P62m, with three formula units per cell. Four structures were refined from X-ray single crystal diffractometer data: α = 750.5(1), c = 459.85(8) pm, wR2 = 0.0491, 364 F2 values, 14 variables for YMgTl; α = 781.3(1), c = 477.84(8) pm, wR2 = 0.0640, BASF = 0.09(2), 425 F2 values, 15 variables for LaMgTl; α = 774.1(1), c = 473.75(7) pm, wR2 = 0.0405, 295 F2 values, 14 variables for CeMgTl; a = 760.3(1), c = 465.93(8) pm, wR2 = 0.0262, 287 F2 values, 14 variables for SmMgTl. The PrMgTl, NdMgTl, GdMgTl, TbMgTl, and DyMgTl structures have been analyzed using the Rietveld technique. The REMgTl structures contain two cystallographically independent thallium sites, both with tri-capped trigonal prismatic coordination: Tl1Mg3RE6 and Tl2Mg6RE3. Together the magnesium and thallium atoms form three-dimensional [MgTl] networks with Mg-Mg distances of 327 and Mg-Tl distances in the range 299 - 303 pm (data for CeMgTl)


2018 ◽  
Vol 73 (11) ◽  
pp. 927-942 ◽  
Author(s):  
Frank Stegemann ◽  
Oliver Janka

AbstractThe rare earth metal-rich cobalt and nickel aluminium compounds with the general compositions RE6Co2Al (RE=Sc, Y, Nd, Sm, Gd–Tm, Lu) and RE6Ni2.25Al0.75 (RE=Y, Gd–Tm, Lu) have been synthesised from the elements by arc-melting, followed by annealing. Single-crystal X-ray diffraction experiments on Y6Co2.02(1)Al0.98(1) (Ho6Co2Ga type; Immm; a=944.1(2), b=952.4(2), c=999.0(2) pm; wR2=0.0452, 1123 F2 values, 35 variables) and Y6Ni2.26(1)Al0.74(1) (Ho6Co2Ga type; Immm; a=938.30(5), b=959.45(5), c=996.05(6) pm; wR2=0.0499, 1131 F2 values, 35 variables) revealed that the compounds form solid solutions according to the general formula RE6(Co/Ni)2+xAl1−x with different homogeneity ranges. The compounds of the Ni series can be obtained in X-ray pure form only with the nominal composition RE6Ni2.25Al0.75. A significant increase of the U22 component of the anisotropic displacement parameters of the Co/Ni2 atoms (4g site) was observed that requires a description of the structure with a split-position model at RT. Further investigations by low temperature (90 K) single-crystal X-ray diffraction experiments of Y6Co2.02(1)Al0.98(1) showed a significant decrease of U22. Magnetic measurements were conducted on the X-ray pure members of the RE6Co2Al (RE=Y, Dy–Tm, Lu) series. Antiferromagnetic ordering was observed for the members with unpaired f electrons with Néel temperatures up to TN=48.0(1) K and two spin reorientations for Dy6Co2Al.


1994 ◽  
Vol 49 (11) ◽  
pp. 1525-1530 ◽  
Author(s):  
Rainer Pöttgen

The new ternary stannides RE2Au2Sn (RE = Gd, Tb) and indides RE2Au2In (RE = Y, Gd-Tm, Lu) were synthesized by arc-melting of the elemental components and subsequent annealing at 800 °C. While Gd2Au2Sn, Tb2Au2Sn and the indides with RE = Y, Gd-Er crystallize in the ordered U3Si2 structure, Tm2Au2In and Lu2Au2In adopt the ordered Zr3Al2 structure, respectively. The crystal structure of Dy2Au2In was refined from single-crystal X- ray data: P4/mbm, Z = 2, a = 784.1(1) pm, c = 373.9(1) pm, V = 0.2299 nm3 and R = 0.028 for 342 F2 values and 12 variables. The tin (indium) atoms in these compounds occupy [RE8] square prisms and the gold atoms are surrounded by [RE6] trigonal prisms. These fragments are derived from the AlB2 and CsCl-type structures. The crystal chemistry of these com­pounds is briefly discussed.


2017 ◽  
Vol 73 (2) ◽  
pp. 121-125 ◽  
Author(s):  
Griffen Desroches ◽  
Svilen Bobev

The ternary phase hexacerium tricosacadmium telluride, Ce6Cd23Te, was synthesized by a high-temperature reaction of the elements in sealed Nb ampoules and was structurally characterized by powder and single-crystal X-ray diffraction. The structure, established from single-crystal X-ray diffraction methods, is isopointal with the Zr6Zn23Si structure type (Pearson symbolcF120, cubic space groupFm-3m), a filled version of the Th6Mn23structure with the same space group and Pearson symbolcF116. Though no Cd-containing rare-earth metal binaries are known to form with this structure, it appears that the addition of small amounts of ap-block element allows the formation of such interstitially stabilized ternary compounds. Temperature-dependent direct current (dc) magnetization measurements suggest local-moment magnetism arising from the Ce3+ground state, with possible valence fluctuations at low temperature, inferred from the deviations from the Curie–Weiss law.


1994 ◽  
Vol 49 (10) ◽  
pp. 1309-1313 ◽  
Author(s):  
Rainer Pöttgen

AbstractThe ternary stannides RE2Au2Sn (RE = Y, Dy, Ho, Er, Tm, Lu) were prepared by arcmelting of the elemental components and subsequent annealing at 800 °C. The structure of Er2Au2Sn (single crystal, X-ray, P42/mnm, Z = 4, a = 778.2(2) pm, c = 739.6(3) pm, V = 0.4479 nm3 and R = 0.026) is described as the ternary ordered version of the Zr3Al2-type structure, a superstructure of the U3Si2-type. It consists of two-dimensionally infinite layers (Au2Sn)n which are separated by the erbium atoms. The structure is built up from slightly distorted [SnEr8) square prisms and [AuEr6] trigonal prisms which are condensed in all three directions. These fragments are derived from the well known AlB2 and CsCl-type structures.


2014 ◽  
Vol 50 (50) ◽  
pp. 6613-6616 ◽  
Author(s):  
L. Schmidt ◽  
A. Dimitrov ◽  
E. Kemnitz

The sol–gel synthesis of nanoscopic ytterbium fluoride is reported. The transparent and stable sols have been characterized by DLS, TEM and XRD. A new YbIII complex has been structurally characterized by single crystal X-ray analysis.


1989 ◽  
Vol 151 ◽  
Author(s):  
W. R. Bennett ◽  
R. F. C. Farrow ◽  
S. S. P. Parkin ◽  
E. E. Marinero

ABSTRACTWe report on the new epitaxial system LaF3/Er/Dy/Er/LaF3/GaAs (111) grown by molecular beam epitaxy. X-ray diffraction studies have been used to determine the epitaxial relationships between the rare earths, the LaF3 and the substrate. Further studies of symmetric and asymmetric reflections yielded the in-plane and perpendicular strain components of the rare earth layers. Such systems may be used to probe the effects of magnetoelastic interactions and dimensionality on magnetic ordering in rare earth metal films and multilayers.


2019 ◽  
Vol 74 (6) ◽  
pp. 497-506 ◽  
Author(s):  
Felix C. Goerigk ◽  
Svetlana Schander ◽  
Makram Ben Hamida ◽  
Dong-Hee Kang ◽  
Florian Ledderboge ◽  
...  

AbstractThe rare earth metal(III) chloride oxidoarsenates(III) with the composition RE5Cl3[AsO3]4 (RE = La–Nd, Sm) could be synthesized via solid-state methods through the reaction of arsenic sesquioxide (As2O3) with the corresponding rare earth metal compounds (La2O3, CeO2 + metallic Ce, Pr6O11, Nd2O3 or metallic Sm) using several chloride-containing fluxing agents in evacuated silica glass ampoules. The compounds build up non-isotypic crystal structures in the monoclinic space groups C2/c for RE = La–Pr, and P2/c for RE = Nd and Sm. All rare earth metal(III) cations exhibit coordination numbers of eight. While (RE1)3+ and (RE2)3+ are only surrounded by oxygen atoms in the form of distorted square antiprisms or prisms, (RE3)3+ is coordinated square antiprismatically by four oxygen atoms and four chloride anions. Although the coordination polyhedra in both structures differ only marginally, their connection patterns show more pronounced differences. This regards especially the (RE)3+ cations and results from different site symmetries of the (Cl1)− anions. All As3+ lone-pair cations are coordinated by three oxygen atoms to form ψ1-tetrahedral [AsO3]3− complex anions with their non-binding (lone) electron pairs pointing into empty channels along [010].


2015 ◽  
Vol 11 ◽  
pp. 1-8 ◽  
Author(s):  
Gert Kollenz ◽  
Ralf Smounig ◽  
Ferdinand Belaj ◽  
David Kvaskoff ◽  
Curt Wentrup

The structures of two derivatives of the bisdioxine diisocyanate 1, the bisurea 4 and the biscarbamate 5, are established by X-ray crystallography and DFT calculations. These compounds possess endo,endo structures, in the case of the bisurea 4 with two nearly parallel pendant chains. The X-ray structures are reproduced very well by DFT calculations. Similar endo,endo conformations are calculated for the bisamide crown ether derivatives 7, where two proximate and nearly parallel crown ether units endow the molecules with a claw-like molecular cleft or tweezer structure as evidenced by an enhanced ability to extract some alkali, alkaline earth and rare earth metal ions.


2011 ◽  
Vol 236-238 ◽  
pp. 3041-3045 ◽  
Author(s):  
Ling Mei Yang ◽  
Peng Mei Lv ◽  
Zhen Hong Yuan ◽  
Wen Luo ◽  
Zhong Ming Wang ◽  
...  

Fe(II)-Zn-based double metal cyanide complex catalysts modified with rare earth metal or transition metal promoters(lanthanum, cerium, zirconium, manganese) for the production of biodiesel were prepared, and the effect of the addition of different metal promoters on the characteristics of the catalyst was studied by using X-ray diffraction (XRD), BET, ICP and Infrared techniques .The experiment results show that the Fe(II)-Zn-based catalyst promoted with 1 wt.% of La(NO3)3·nH2O exhibits the highest catalytic activity for the reaction, being as high as 99.3% of the yield of fatty acid methyl esters (FAME). Fe(II)-Zn-based catalysts have a tentative molecular formula: K2Zn3[Fe(CN)6]2·xH2O· (t-BuOH), where x=3-9 determined by using elemental analysis and ICP. It has been shown that the molecular formula of Fe(II)-Zn-based double metal cyanide complex catalysts did not change by adding 1 wt.% of rare earth metal or transition metal promoters. X-ray diffraction and BET results showed that Fe(II)-Zn-based catalysts with 1 wt.% of metal promoters salts exhibit smaller particle size, higher surface area than the Fe(II)-Zn catalyst ,which may be related to the higher activity of the catalysts.


Sign in / Sign up

Export Citation Format

Share Document