Modeling of Sucker rod pump in CBM wells using QRod Simulator

2011 ◽  
Vol 3 (5) ◽  
pp. 274-276
Author(s):  
Siraj Bhatkar ◽  
◽  
Yusufuddin Nehri ◽  
Fahad Shaikh
Keyword(s):  
Sucker Rod ◽  
Sucker Rod Pump

scholarly journals A comprehensive review of sucker rod pumps’ components, diagnostics, mathematical models, and common failures and mitigations

2021 ◽  
Author(s):  
Sherif Fakher ◽  
Abdelaziz Khlaifat ◽  
M. Enamul Hossain ◽  
Hashim Nameer
Keyword(s):  
Mathematical Models ◽  
Oil And Gas ◽  
Oil And Gas Industry ◽  
Gas Industry ◽  
Holistic View ◽  
Comprehensive Review ◽  
Artificial Lift ◽  
Sucker Rod ◽  
Sucker Rod Pump

AbstractIn many oil reservoirs worldwide, the downhole pressure does not have the ability to lift the produced fluids to the surface. In order to produce these fluids, pumps are used to artificially lift the fluids; this method is referred to as artificial lift. More than seventy percent of all currently producing oil wells are being produced by artificial lift methods. One of the most applied artificial lift methods is sucker rod pump. Sucker rod pumps are considered a well-established technology in the oil and gas industry and thus are easy to apply, very common worldwide, and low in capital and operational costs. Many advancements in technology have been applied to improve sucker rod pumps performance, applicability range, and diagnostics. With these advancements, it is important to be able to constantly provide an updated review and guide to the utilization of the sucker rod pumps. This research provides an updated comprehensive review of sucker rod pumps components, diagnostics methods, mathematical models, and common failures experienced in the field and how to prevent and mitigate these failures. Based on the review conducted, a new classification of all the methods that can fall under the sucker rod pump technology based on newly introduced sucker rod pump methods in the industry has been introduced. Several field cases studies from wells worldwide are also discussed in this research to highlight some of the main features of sucker rod pumps. Finally, the advantages and limitations of sucker rod pumps are mentioned based on the updated review. The findings of this study can help increase the understanding of the different sucker rod pumps and provide a holistic view of the beam rod pump and its properties and modeling.

Introducing the Application of Hybrid Gas and Sand Control in Sucker Rod Pump (SRP) Case Study Old Rimau Mature Field South Sumatera

2021 ◽  
Author(s):  
P. R. Safiraldi
Keyword(s):  
New Technology ◽  
Middle Section ◽  
Hybrid Device ◽  
Sand Control ◽  
Sucker Rod ◽  
Sucker Rod Pump ◽  
Gas Separator ◽  
Mature Field ◽  
Sandstone Reservoir

Objective/Scope: Challenges of sucker rod pumping operation in high gas and solid production;The implementation of integrated down-hole gas and solid separation in one device. Method procedure/processes: Old Rimau Fields in South Sumatera produce oil from sandstone reservoir with GOR above 800 scf/stb and solid production resulted from fracturing proppant flow back. Due to these conditions, some problems such as gas lock or interference, pump leakage, and rod parted were discovered which resulting in low SRP run life. The installation of sand screen and gas anchor has been implemented to encounter this issue. However, this initiative still ineffective due to limited conditions. If the sand screen was installed to control the sand, then the gas anchor to control the gas could not be installed and vice versa.Results, observations, conclusions: Integrated solid and gas handling called "hybrid" device has been introduced. The device is connected directly at the bottom of down-hole pump consist of three section, the upper section for intake and gas separator, the middle section for gas and solid separator, and lower one for solid container. The first utilization was conducted in three SRP wells, which are KG-09, LKP-21, and KG-10. Previously, these wells were shut-in due to down-hole problem. After installing the device while well service, the SRP run normally to produce the oil. The increasing of pump load performance was also obtained, indicated by the dyna card. At this time, the SRP is still running and run life is still under surveillance. This paper will explain the new technology end-to-end implementation of the integrated down-hole sand and gas control in one device for Sucker Rod Pump (SRP) system.

Development and implementation of device for capturing large mechanical particles falling into the space between cylinder and plunger of sucker-rod pump

2020 ◽  
pp. 43-45
Author(s):  
L.G. Hajikerimova ◽  
◽  
◽  
Keyword(s):  
Oil Wells ◽  
Deep Well ◽  
Pressure Decrease ◽  
Sucker Rod ◽  
Large Particles ◽  
Sucker Rod Pump ◽  
Trapping Device

The deep pump, mainly sucker-rod deep pumping method is widely applied in the onshore oil wells of Azerbaijan. Despite the fact that the deep-well sucker rod pumping method is widespread, its operation in sand-producing wells is accompanied by various complications. Since mechanical particles wearing the pump parts out, falling into the space between the plunger and the cylinder, either wedge the plunger inside the cylinder or increase the gap between them. To prevent the ingress of large particles of sand into the gap between the plunger and the cylinder of the deep sucker rod pump, a device for sand trapping has been developed. The sand-trapping device is installed within the well tubing strings on the rod string and prevents the big particles of the liquid in the pipes falling into the gap between the plunger and cylinder. As the plunger, the device is started via balanced head. Due to the equipment installation, the liquid injected from the pump undergoes pressure decrease and the conditions for deposition and accumulation of large particles are formed.

scholarly journals Model predictive automatic control of sucker rod pump system with simulation case study

2019 ◽  
Vol 121 ◽  
pp. 265-284 ◽  
Author(s):  
Brigham Hansen ◽  
Brandon Tolbert ◽  
Cory Vernon ◽  
John D. Hedengren
Keyword(s):  
Automatic Control ◽  
Pump System ◽  
Sucker Rod ◽  
Sucker Rod Pump

Development and Application of a Control Strategy for Sucker Rod Pump Artificial Oil Lift System

2018 ◽  
Vol 16 (8) ◽  
pp. 2177-2183
Author(s):  
Hannah Licia Cruz Galvao ◽  
Gabriel Bessa Freitas Fuezi Oliva ◽  
Raphael Eliedson Silva ◽  
Rutacio Oliveira Costa ◽  
Andre Laurindo Maitelli ◽  
...  
Keyword(s):  
Control Strategy ◽  
Sucker Rod ◽  
Sucker Rod Pump

scholarly journals ELECTROMECHANICAL DRIVE OF PRODUCTION WELL SUCKER ROD PUMP

2017 ◽  
pp. 125-128
Author(s):  
R. B. Bulatov ◽  
L. G. Tugashova
Keyword(s):  
Utility Model ◽  
Production Well ◽  
Drive Mechanism ◽  
Electromechanical Drive ◽  
Sucker Rod ◽  
Sucker Rod Pump

The paper considers the design and operation of electromechanical drive of sucker rod pumps, which received a patent for utility model. The proposed device allows to significantly reduce weight and size dimensions of the drive mechanism of serial sucker rod pumps.

Sign in / Sign up

Export Citation Format

Share Document