Transport and fluctuations in nonlinear-dissipative systems: role of interparticle collisions

1999 ◽  
Vol 4 ◽  
pp. 31-86 ◽  
Author(s):  
R. Katilius ◽  
A. Matulionis ◽  
R. Raguotis ◽  
I. Matulionienė
Keyword(s):  
Electric Fields ◽  
Carrier Density ◽  
Experimental Results ◽  
Dissipative Systems ◽  
Doped Semiconductors ◽  
Electron Diffusion ◽  
Electron Collisions ◽  
Electric Noise ◽  
Diffusion Phenomena

The goal of the paper is to overview contemporary theoretical and experimental research of the microwave electric noise and fluctuations of hot carriers in semiconductors, revealing sensitivity of the noise spectra to non-linearity in the applied electric field strength and, especially, in the carrier density. During the last years, investigation of electronic noise and electron diffusion phenomena in doped semiconductors was in a rapid progress. By combining analytic and Monte Carlo methods as well as the available experimental results on noise, it became possible to obtain the electron diffusion coefficients in the range of electric fields where inter-electron collisions are important and Price’s relation is not necessarily valid. Correspondingly, a special attention to the role of inter-electron collisions and of the non-linearity in the carrier density while shaping electric noise and diffusion phenomena in the non-equilibrium states will be paid. The basic and up-to-date information will be presented on methods and advances in this contemporary field - the field in which methods of non-linear analytic and computational analysis are indispensable while seeking coherent understanding and interpretation of experimental results.

MICROWAVE FLUCTUATIONS IN ELECTRON GAS WITH PAIR COLLISIONS

2001 ◽  
Vol 01 (01) ◽  
pp. R81-R100 ◽  
Author(s):  
R. KATILIUS ◽  
A. MATULIONIS
Keyword(s):  
Monte Carlo ◽  
Electric Fields ◽  
Monte Carlo Methods ◽  
Recent Progress ◽  
Electron Gas ◽  
Experimental Results ◽  
Hot Electron ◽  
Electron Collisions ◽  
Noise Characteristics ◽  
Microwave Noise

The paper overviews recent progress in the field of hot-electron microwave noise and fluctuations with an emphasis on contribution due to inter-electron collisions that are inevitable in doped semi-conductors at a relatively high density of mobile electrons. A special attention is paid to the problem of hot-electron diffusion in the range of electric fields where inter-electron collisions are important and Price's relation connecting diffusion and noise characteristics is not necessarily valid. The basic and up-to-date information is presented on methods and advances in the field where combined analytic and Monte Carlo methods of investigation are indispensable while seeking coherent understanding of experimental results.

scholarly journals Millimeter (MM) wave and microwave frequency radiation produce deeply penetrating effects: the biology and the physics

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Martin L. Pall
Keyword(s):  
Magnetic Fields ◽  
Electric Fields ◽  
Cardiac Activity ◽  
Maximum Level ◽  
Voltage Sensor ◽  
The Body ◽  
Time Varying ◽  
The Brain ◽  
Mm Waves

Abstract Millimeter wave (MM-wave) electromagnetic fields (EMFs) are predicted to not produce penetrating effects in the body. The electric but not magnetic part of MM-EMFs are almost completely absorbed within the outer 1 mm of the body. Rodents are reported to have penetrating MM-wave impacts on the brain, the myocardium, liver, kidney and bone marrow. MM-waves produce electromagnetic sensitivity-like changes in rodent, frog and skate tissues. In humans, MM-waves have penetrating effects including impacts on the brain, producing EEG changes and other neurological/neuropsychiatric changes, increases in apparent electromagnetic hypersensitivity and produce changes on ulcers and cardiac activity. This review focuses on several issues required to understand penetrating effects of MM-waves and microwaves: 1. Electronically generated EMFs are coherent, producing much higher electrical and magnetic forces then do natural incoherent EMFs. 2. The fixed relationship between electrical and magnetic fields found in EMFs in a vacuum or highly permeable medium such as air, predicted by Maxwell’s equations, breaks down in other materials. Specifically, MM-wave electrical fields are almost completely absorbed in the outer 1 mm of the body due to the high dielectric constant of biological aqueous phases. However, the magnetic fields are very highly penetrating. 3. Time-varying magnetic fields have central roles in producing highly penetrating effects. The primary mechanism of EMF action is voltage-gated calcium channel (VGCC) activation with the EMFs acting via their forces on the voltage sensor, rather than by depolarization of the plasma membrane. Two distinct mechanisms, an indirect and a direct mechanism, are consistent with and predicted by the physics, to explain penetrating MM-wave VGCC activation via the voltage sensor. Time-varying coherent magnetic fields, as predicted by the Maxwell–Faraday version of Faraday’s law of induction, can put forces on ions dissolved in aqueous phases deep within the body, regenerating coherent electric fields which activate the VGCC voltage sensor. In addition, time-varying magnetic fields can directly put forces on the 20 charges in the VGCC voltage sensor. There are three very important findings here which are rarely recognized in the EMF scientific literature: coherence of electronically generated EMFs; the key role of time-varying magnetic fields in generating highly penetrating effects; the key role of both modulating and pure EMF pulses in greatly increasing very short term high level time-variation of magnetic and electric fields. It is probable that genuine safety guidelines must keep nanosecond timescale-variation of coherent electric and magnetic fields below some maximum level in order to produce genuine safety. These findings have important implications with regard to 5G radiation.

scholarly journals Elucidating the Influence of Electric Fields toward CO2 Activation on YSZ (111)

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 271
Author(s):  
Nisa Ulumuddin ◽  
Fanglin Che ◽  
Jung-Il Yang ◽  
Su Ha ◽  
Jean-Sabin McEwen
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Heterogeneous Catalysts ◽  
Co2 Reduction ◽  
Total Density ◽  
Reverse Water Gas Shift ◽  
High Thermodynamic Stability ◽  
Shift Reaction ◽  
Water Gas

Despite its high thermodynamic stability, the presence of a negative electric field is known to facilitate the activation of CO2 through electrostatic effects. To utilize electric fields for a reverse water gas shift reaction, it is critical to elucidate the role of an electric field on a catalyst surface toward activating a CO2 molecule. We conduct a first-principles study to gain an atomic and electronic description of adsorbed CO2 on YSZ (111) surfaces when external electric fields of +1 V/Å, 0 V/Å, and −1 V/Å are applied. We find that the application of an external electric field generally destabilizes oxide bonds, where the direction of the field affects the location of the most favorable oxygen vacancy. The direction of the field also drastically impacts how CO2 adsorbs on the surface. CO2 is bound by physisorption when a +1 V/Å field is applied, a similar interaction as to how it is adsorbed in the absence of a field. This interaction changes to chemisorption when the surface is exposed to a −1 V/Å field value, resulting in the formation of a CO3− complex. The strong interaction is reflected through a direct charge transfer and an orbital splitting within the Olatticep-states. While CO2 remains physisorbed when a +1 V/Å field value is applied, our total density of states analysis indicates that a positive field pulls the charge away from the adsorbate, resulting in a shift of its bonding and antibonding peaks to higher energies, allowing a stronger interaction with YSZ (111). Ultimately, the effect of an electric field toward CO2 adsorption is not negligible, and there is potential in utilizing electric fields to favor the thermodynamics of CO2 reduction on heterogeneous catalysts.

scholarly journals Electric potential differences across auroral generator interfaces

2013 ◽  
Vol 31 (2) ◽  
pp. 251-261 ◽  
Author(s):  
J. De Keyser ◽  
M. Echim
Keyword(s):  
Electric Field ◽  
High Altitude ◽  
Electric Fields ◽  
Electric Potential ◽  
Equilibrium Configuration ◽  
Potential Difference ◽  
Field Profile ◽  
Electric Potential Difference ◽  
Electric Field Profile

Abstract. Strong localized high-altitude auroral electric fields, such as those observed by Cluster, are often associated with magnetospheric interfaces. The type of high-altitude electric field profile (monopolar, bipolar, or more complicated) depends on the properties of the plasmas on either side of the interface, as well as on the total electric potential difference across the structure. The present paper explores the role of this cross-field electric potential difference in the situation where the interface is a tangential discontinuity. A self-consistent Vlasov description is used to determine the equilibrium configuration for different values of the transverse potential difference. A major observation is that there exist limits to the potential difference, beyond which no equilibrium configuration of the interface can be sustained. It is further demonstrated how the plasma densities and temperatures affect the type of electric field profile in the transition, with monopolar electric fields appearing primarily when the temperature contrast is large. These findings strongly support the observed association of monopolar fields with the plasma sheet boundary. The role of shear flow tangent to the interface is also examined.

Role of Ce2Zr3O10 Phase on the Microstructure and Fracture Toughness of ZTA Composites

2016 ◽  
Vol 840 ◽  
pp. 57-60 ◽  
Author(s):  
Nik Akmar Rejab ◽  
Zhwan Dilshad Ibrahim Sktani ◽  
Afifah Mohd Ali ◽  
Zainal Arifin Ahmad
Keyword(s):  
Fracture Toughness ◽  
Experimental Results ◽  
Mixing Process ◽  
Transformation Toughening ◽  
Simple Route ◽  
Zirconia Toughened Alumina

Despite the impressive development in understanding transformation toughening, tailoring the toughness of zirconia toughened alumina (ZTA) ceramics remained a major challenge. In our research, a simple route based on the powders mixing process of ZTA powders with varying CeO2 additions (0 - 10 wt.%) is developed to investigate this issue. The experimental results clearly reveal that the fracture toughness of ZTA ceramics can be tailored by mixing of ZTA starting powders.

Sign in / Sign up

Export Citation Format

Share Document