A DC Voltage Estimations at the Maximum Power Point of a PV System with Partial Shade

2015 ◽  
Vol 135 (12) ◽  
pp. 1463-1469
Author(s):  
Atsushi Nakata ◽  
Akihiro Torii ◽  
Jun Ishikawa ◽  
Suguru Mototani ◽  
Kae Doki ◽  
...  
2016 ◽  
Vol 197 (4) ◽  
pp. 53-61
Author(s):  
ATSUSHI NAKATA ◽  
AKIHIRO TORII ◽  
JUN ISHIKAWA ◽  
SUGURU MOTOTANI ◽  
KAE DOKI ◽  
...  

Author(s):  
Imad A. Elzein ◽  
Yuri N. Petrenko

In this article an extended literature surveying review is conducted on a set of comparative studies of maximum power point tracking (MPPT) techniques.  Different MPPT methods are conducted with an ultimate aim of how to be maximizing the PV system output power by tracking Pmax in a set of different operational circumstances. In this paper maximum power point tracking, MPPT techniques are reviewed on basis of different parameters related to the design simplicity and or complexity, implementation, hardware required, and other related aspects.


2021 ◽  
Vol 13 (5) ◽  
pp. 2656
Author(s):  
Ahmed G. Abo-Khalil ◽  
Walied Alharbi ◽  
Abdel-Rahman Al-Qawasmi ◽  
Mohammad Alobaid ◽  
Ibrahim M. Alarifi

This work presents an alternative to the conventional photovoltaic maximum power point tracking (MPPT) methods, by using an opposition-based learning firefly algorithm (OFA) that improves the performance of the Photovoltaic (PV) system both in the uniform irradiance changes and in partial shading conditions. The firefly algorithm is based on fireflies’ search for food, according to which individuals emit progressively more intense glows as they approach the objective, attracting the other fireflies. Therefore, the simulation of this behavior can be conducted by solving the objective function that is directly proportional to the distance from the desired result. To implement this algorithm in case of partial shading conditions, it was necessary to adjust the Firefly Algorithm (FA) parameters to fit the MPPT application. These parameters have been extensively tested, converging satisfactorily and guaranteeing to extract the global maximum power point (GMPP) in the cases of normal and partial shading conditions analyzed. The precise adjustment of the coefficients was made possible by visualizing the movement of the particles during the convergence process, while opposition-based learning (OBL) was used with FA to accelerate the convergence process by allowing the particle to move in the opposite direction. The proposed algorithm was simulated in the closest possible way to authentic operating conditions, and variable irradiance and partial shading conditions were implemented experimentally for a 60 [W] PV system. A two-stage PV grid-connected system was designed and deployed to validate the proposed algorithm. In addition, a comparison between the performance of the Perturbation and Observation (P&O) method and the proposed method was carried out to prove the effectiveness of this method over the conventional methods in tracking the GMPP.


Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2521
Author(s):  
Alfredo Gil-Velasco ◽  
Carlos Aguilar-Castillo

There are multiples conditions that lead to partial shading conditions (PSC) in photovoltaic systems (PV). Under these conditions, the harvested energy decreases in the PV system. The maximum power point tracking (MPPT) controller aims to harvest the greatest amount of energy even under partial shading conditions. The simplest available MPPT algorithms fail on PSC, whereas the complex ones are effective but require high computational resources and experience in this type of systems. This paper presents a new MPPT algorithm that is simple but effective in tracking the global maximum power point even in PSC. The simulation and experimental results show excellent performance of the proposed algorithm. Additionally, a comparison with a previously proposed algorithm is presented. The comparison shows that the proposal in this paper is faster in tracking the maximum power point than complex algorithms.


2016 ◽  
Vol 78 (6-2) ◽  
Author(s):  
Ammar Hussein Mutlag ◽  
Azah Mohamed ◽  
Hussain Shareef

In photovoltaic (PV) system, maximum power tracking (MPPT) is crucial to improve the system performance. Irradiance and temperature are the two important parameters that affect MPPT. The conventional perturbation and observation (P&O) based MPPT algorithm does not accurately track the PV maximum power point. Therefore, this paper presents an improved P&O algorithm (Im-P&O) based on variable perturbation. The idea behind the Im-P&O algorithm is to produce variable step changes in the reference current/voltage for fast tracking of the PV maximum power point. The Im-P&O based MPPT is designed for the 25 SolarTIFSTF-120P6 PV panels, with a capacity of 3 kW peak. A complete PV system is modeled using the MATLAB/Simulink. Simulation results showed that the Im-P&O based MPPT achieved faster and accurate performance compared with the conventional P&O algorithm.


2015 ◽  
Vol 787 ◽  
pp. 227-232 ◽  
Author(s):  
L.A. Arun Shravan ◽  
D. Ebenezer

In recent years there has been a growing attention towards use of solar energy. Advantages of photovoltaic (PV) systems employed for harnessing solar energy are reduction of greenhouse gas emission, low maintenance costs, fewer limitations with regard to site of installation and absence of mechanical noise arising from moving parts. However, PV systems suffer from relatively low conversion efficiency. Therefore, maximum power point tracking (MPPT) for the solar array is essential in a PV system. The nonlinear behaviour of PV systems as well as variations of the maximum power point with solar irradiance level and temperature complicates the tracking of the maximum power point. This paper reviews various MPPT methods based on three categories: offline, online and hybrid methods. Design of a PV system in a encoding environment has also been reviewed here. Furthermore, different MPPT methods are discussed in terms of the dynamic response of the PV system to variations in temperature and irradiance, attainable efficiency, and implementation considerations.


Sign in / Sign up

Export Citation Format

Share Document