scholarly journals An Experimental Study on the Combustion and Nanoparticle Emission Characteristics of Gasoline-diesel Fuel in a Premixed Charge Compression Ignition Engine

2012 ◽  
Vol 17 (2) ◽  
pp. 71-76
Author(s):  
Seung-Hyun Yoon ◽  
Doo-Jin Lee ◽  
Chang-Sik Lee
2016 ◽  
Vol 9 (2) ◽  
pp. 97-101
Author(s):  
Biplab Das ◽  
Pradip Lingfa

The paper highlights the results of an experimental investigation carried out on Karanja oil as a supplementary for diesel fuel in Compression Ignition engine. In the present study, triglycerides of Karanja oil is converted into mono-ester (biodiesel) using based catalyst transesterfication process. Karanja biodiesel is blended with petroleum diesel in the volumetric proportions of 2−10%. Results reveal that the performance characteristics of Karanja biodiesel blends are well comparable with diesel fuel. The emission characteristics such as CO, HC and smoke are found to be lower for Karanja biodiesel blends at all the engine load conditions compared to diesel fuel. Hence, it is concluded that Karanja oil at lower blends can be used in diesel engine without any substantial engine modification.


Fuel ◽  
2013 ◽  
Vol 107 ◽  
pp. 409-418 ◽  
Author(s):  
Lennox Siwale ◽  
Lukács Kristóf ◽  
Torok Adam ◽  
Akos Bereczky ◽  
Makame Mbarawa ◽  
...  

2010 ◽  
Vol 7 (1) ◽  
pp. 229-234 ◽  
Author(s):  
M. P. Sudeshkumar ◽  
G. Devaradjane

Rapid depletion of petroleum reserves and the environmental pollution caused by the growing use of conventional fuels created a challenge before the world that new type of fuels should replace the conventional fuels to achieve the future emission regulations. Hence great deal of research effort has been focused to find alternative fuel. The consideration of oxygenates with diesel fuel is a recent approach receives great attention in reducing the exhaust emissions of an engine The combustion, performance and emission characteristics of diesel fuel and oxygenated blends with diesel are analyzed in a four stroke naturally aspirated single cylinder direct injection compression ignition engine. The additives include 2-Ethoxyethanol (2EE), DiethyleneGlycol Dimethyl ether (DGM) and 2-Methoxyethanol (2ME) and the oxygenated compounds were selected based on the availability, price and oxygen content. These oxygenated compounds are blended with diesel fuel in proportion of 6% by volume. Combustion parameters such as in-cylinder pressure and Heat release rate were studied. The engine emission characteristics of the Compression ignition (CI) engine fuelling with oxygenated blends are studied experimentally. The performance of oxygenates on thermal efficiency and specific fuel consumption were studied. Comparing the combustion, performance and emission, the addition of 2-methoxy ethanol blend shows better performance than other two oxygenated blends with diesel and diesel fuel.


Sign in / Sign up

Export Citation Format

Share Document