THE CAPACITY FACTOR AS A MEASURE OF THE EFFICIENCY OF THE WIND POWER PLANT

Author(s):  
S. G. Ignatiev
Author(s):  
Bamba Heiba ◽  
Ahmed Med Yahya ◽  
Mohammed Qasim Taha ◽  
Nadhira Khezam ◽  
Abdel Kader Mahmoud

In this paper, the performance analysis of a 30 MW wind power plant is performed. The farm consists of fifteen (T1-T15) G9 7/2000/GAMESA 2 MW grid-connected turbines. The farm is in operation mode installed 28 km south of Nouakchott city in Mauritania. The analyzed data are monitored from July 1st, 2015 (the first operation day of the power plant) to December 31st, 2019. The parameters of performance evaluation are power generation, capacity factor, machine availability, grid availability, and system availability. It is observed from data analysis, the wind farm supplies a total energy of 507.39 GWh to the power grid and have a high average capacity factor of 42.55%. T1 produces the highest amount of electrical energy among the other turbines with a total energy output of 35.46 GWh, an average capacity factor of 44.97%, and operating hours of 33,814 hours. While T12 produced the minimum amount of energy in this period, the difference in energy compared to T1 is 4.563 GWh. It is observed that the availability of the network is unstable and needs improvement, varying between 90.86% in 2016 and 93.16% in 2018. In the first year of operation, 97.06% of the turbines were available. However, the average availability of the wind farm is approximately 94% during the total study period.


2017 ◽  
Author(s):  
Katherine L. Dykes ◽  
M. M. Hand ◽  
Eric J. Lantz ◽  
Tyler J. Stehly ◽  
Michael C. Robinson ◽  
...  

2017 ◽  
Vol 18 (2) ◽  
pp. 68
Author(s):  
Made Padmika ◽  
I Made Satriya Wibawa ◽  
Ni Luh Putu Trisnawati

A prototype of a wind power plant had been created using a ventilator  as a generator spiner. This power plant utilizes wind speed as its propulsion. Electricity generated in the DC voltage form between 0 volts up to 7.46 volts. The MT3608 module is used to stabilize and raise the voltage installed in the input and output of the charging circuit. For instrument testing, the wind speed on 0 m/s up to 6 m/s interval used. Maximum output of this tool with a wind speed of 6 m/s is 7.46 volts.


Sign in / Sign up

Export Citation Format

Share Document