Thermoelectric Properties of Phase Separated Composite of Ln-Doped SrTiO3 and TiO2 Micro Crystals

2007 ◽  
Vol 1044 ◽  
Author(s):  
Kiyoshi Fuda ◽  
Kenji Murakami ◽  
Shigeaki Sugiyama

AbstractIt seems that no satisfactory TE property has been found in n-type oxide bulk materials even though Al-doped ZnO and La-doped SrTiO3 have high thermoelectric (TE) responses. Difficulty in developing high-performance TE materials seems to lie in finding low thermal conductivity in such oxides. The purpose of this study is to find a possibility to make an n-type TE oxide bulk material having low thermal conductivity and excellent TE properties as well. For this purpose, we fabricated and examined a series of composites constructed of TiO2 and Ln-doped SrTiO3 fine crystals. The composites were prepared via two processing steps: (1) precursor oxide preparation by wet processes; (2) sintering by using spark plasma sintering (SPS) apparatus. The microscopic structure was examined by using scanning electron microscope (SEM; HITACHI S-4500 model) attached with an energy dispersive x-ray spectroscopy. The electrical conductivities and the Seebeck coefficients were measured simultaneously using an ULVAC ZEM-1 instrument in helium atmosphere. The thermal diffusivities were measured by a laser flash method in vacuum. The composites obtained here were found to commonly have a mosaic type texture constructed of TiO2 and SrTiO3 fine particles with a typical size of 500 nm. The thermal conductivity values measured for three samples with different contents are ranged between 3 and 4 Wm-1K-1 in the temperature range from room temperature to 800 C. The values are apparently lower than the value for single crystal SrTiO3 samples presented in literature. Taking account the other TE data, e.g. Seebeck coefficient and electrical conductivity, we calculated dimensionless figure of merit, ZT, to be at maximum 0.15 at 800°C.

2005 ◽  
Vol 87 (6) ◽  
pp. 061919 ◽  
Author(s):  
Ken Kurosaki ◽  
Atsuko Kosuga ◽  
Hiroaki Muta ◽  
Masayoshi Uno ◽  
Shinsuke Yamanaka

2000 ◽  
Vol 626 ◽  
Author(s):  
Antje Mrotzek ◽  
Kyoung-Shin Choi ◽  
Duck-Young Chung ◽  
Melissa A. Lane ◽  
John R. Ireland ◽  
...  

ABSTRACTWe present the structure and thermoelectric properties of the new quaternary selenides K1+xM4–2xBi7+xSe15 (M = Sn, Pb) and K1-xSn5-xBi11+xSe22. The compounds K1+xM4-2xBi7+xSe15 (M= Sn, Pb) crystallize isostructural to A1+xPb4-2xSb7+xSe15 with A = K, Rb, while K1-xSn5-xBi11+xSe22 reveals a new structure type. In both structure types fragments of the Bi2Te3-type and the NaCl-type are connected to a three-dimensional anionic framework with K+ ions filled tunnels. The two structures vary by the size of the NaCl-type rods and are closely related to β-K2Bi8Se13 and K2.5Bi8.5Se14. The thermoelectric properties of K1+xM4-2xBi7+xSe15 (M = Sn, Pb) and K1-xSn5-xBi11+xSe22 were explored on single crystal and ingot samples. These compounds are narrow gap semiconductors and show n-type behavior with moderate Seebeck coefficients. They have very low thermal conductivity due to an extensive disorder of the metal atoms and possible “rattling” K+ ions.


Author(s):  
А.В. Асач ◽  
Г.Н. Исаченко ◽  
А.В. Новотельнова ◽  
В.Е. Фомин ◽  
К.Л. Самусевич ◽  
...  

The influence of the geometric shape of the samples on the uncertainty of the coefficient of thermal conductivity measurement of materials by the method of a laser flash has been studied. Using a method of mathematical modeling in the Comsol Multiphysics software, a model that simulates the process of measuring the coefficient of thermal conductivity of samples made of graphite, Mg2Si0.4Sn0.6 and bismuth telluride using a laser flash method has been created. Samples of cylindrical shape with plane-parallel sides and samples in the form of a truncated cylinder, as well as samples in the form of a parallelepiped with a square base, were investigated. It is shown that the measurement uncertainty of samples with plane-parallel sides and sizes up to 12.7 mm, does not exceed 2%. For samples in the form of a truncated cylinder with a diameter of 3 mm and at an angle of ϕ= 1.5°, the measurement uncertainty does not exceed 3%. With an increase in the sample diameter and the ϕ angle, the measurement uncertainty increases significantly.


2007 ◽  
Vol 124-126 ◽  
pp. 1079-1082 ◽  
Author(s):  
Sung Ryong Kim ◽  
Dae Hoon Kim ◽  
Dong Ju Kim ◽  
Min Hyung Kim ◽  
Joung Man Park

Thermal properties of PEEK/silicon carbide(SiC) and PEEK/carbon fiber(CF) were investigated from ambient temperature up to 200°C measured by laser flash method. Thermal conductivity was increased from 0.29W/m-K without filler up to 2.4 W/m-K with at 50 volume % SiC and 3.1W/m-K with 40 volume % carbon fiber. Values from Nielsen theory that predicts thermal conductivity of two-phase system were compared to those obtained from experiment.


1981 ◽  
Vol 20 (4) ◽  
pp. 333-336 ◽  
Author(s):  
Yutaka Tada ◽  
Makoto Harada ◽  
Masataka Tanigaki ◽  
Wataru Eguchi

2007 ◽  
Vol 1044 ◽  
Author(s):  
Shinsuke Yamanaka ◽  
Ken Kurosaki ◽  
Anek Charoenphakdee ◽  
Hideaki Mastumoto ◽  
Hiroaki Muta

AbstractWith the goal of developing high-performance bulk thermoelectric materials, we have characterized ternary silver thallium tellurides. The ternary silver thallium tellurides exhibit extremely low thermal conductivity (<0.5 Wm−1K−1) and consequently their thermoelectric performance is excellent. Although the extremely low thermal conductivity materials, as typified by the ternary silver thallium tellurides, would be a new class of next-generation thermoelectric materials, thallium compounds are unsuitable for practical application because of their toxicity. Against such a background, we are currently exploring thallium-free thermoelectric materials with extremely low thermal conductivity. In this paper, we will briefly summarize the thermoelectric properties of ternary thallium tellurides obtained in our group. Further experiments aimed at improving the ZT of these materials will be presented. Finally, we will propose two candidates: Ag8GeTe6 and Ga2Te3 as thallium-free low thermal conductivity materials.


2014 ◽  
Vol 35 (3) ◽  
pp. 3-16 ◽  
Author(s):  
Monika Kosowska-Golachowska ◽  
Władysław Gajewski ◽  
Tomasz Musiał

Abstract In this study, a new laser flash system was proposed for the determination of the thermal conductivity of brown coal, hard coal and anthracite. The main objective of the investigation was to determine the effect of coal rank, composition, physical structure and temperature on thermal conductivity. The solid fuels tested were medium conductors of heat whose determined thermal conductivities were in the range of 0.09 to 0.23W/(mK) at room temperature. The thermal conductivity of the solid fuels tested typically increased with the rank of coal and the measurement temperature. The results of this study show that the physical structure of solid fuels and temperature have a dominant effect on the fuels’ thermal conductivity.


Sign in / Sign up

Export Citation Format

Share Document