XVI Международная конференция "Термоэлектрики и их применения --- 2018" (ISCTA 2018), Санкт-Петербург, 8-12 октября 2018 г. Влияние неидеальности геометрической формы образца на неопределенность измерений теплопроводности методом лазерной вспышки
The influence of the geometric shape of the samples on the uncertainty of the coefficient of thermal conductivity measurement of materials by the method of a laser flash has been studied. Using a method of mathematical modeling in the Comsol Multiphysics software, a model that simulates the process of measuring the coefficient of thermal conductivity of samples made of graphite, Mg2Si0.4Sn0.6 and bismuth telluride using a laser flash method has been created. Samples of cylindrical shape with plane-parallel sides and samples in the form of a truncated cylinder, as well as samples in the form of a parallelepiped with a square base, were investigated. It is shown that the measurement uncertainty of samples with plane-parallel sides and sizes up to 12.7 mm, does not exceed 2%. For samples in the form of a truncated cylinder with a diameter of 3 mm and at an angle of ϕ= 1.5°, the measurement uncertainty does not exceed 3%. With an increase in the sample diameter and the ϕ angle, the measurement uncertainty increases significantly.