Multifunctional Elastomer Nanocomposites based on EPDM and Carbon Nanotubes

2008 ◽  
Vol 1143 ◽  
Author(s):  
Paola Ciselli ◽  
Lan Lu ◽  
James JC Busfield ◽  
Ton Peijs
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Linear Relation ◽  
Pressure Sensors ◽  
Ethylene Propylene Diene Monomer ◽  
Electrical Behavior ◽  
Ethylene Propylene ◽  
Multi Wall Carbon Nanotubes ◽  
Sensor Applications ◽  
Elastomeric Composites

ABSTRACTElastomeric composites based on Ethylene-Propylene-Diene-Monomer (EPDM) filled with multi-wall carbon nanotubes (MWNTs) have been prepared, showing improved mechanical properties as compared to the pure EPDM matrix. The results have been discussed using the Guth model. The main focus of the study was on the electrical behavior of the nanocomposites, in view of possible sensor applications. A linear relation has been found between conductivity and deformations up to 10% strain, which means that such materials could be used for applications such as strain or pressure sensors. Cyclic experiments were conducted to establish whether the linear relation was reversible, which is an important requirement for sensor materials.

Piezoresistive polymer composites based on EPDM and MWNTs for strain sensing applications

e-Polymers ◽  
2010 ◽  
Vol 10 (1) ◽  
Author(s):  
Paola Ciselli ◽  
Lan Lu ◽  
James J.C. Busfield ◽  
Ton Peijs
Keyword(s):  
Polymer Composites ◽  
Linear Relation ◽  
Conductive Polymer ◽  
Pressure Sensors ◽  
Strain Sensing ◽  
Electrical Behavior ◽  
Multi Wall Carbon Nanotubes ◽  
Sensor Applications ◽  
Sensing Applications ◽  
Elastomeric Composites

AbstractElastomeric composites based on Ethylene-Propylene-Diene-Monomer (EPDM) filled with multi-wall carbon nanotubes (MWNTs) have been prepared, showing improved mechanical properties as compared to the pure EPDM matrix. The results have been discussed using the Guth model. The main focus of the study was on the electrical behavior of these conductive polymer composites (CPCs), in view of possible sensor applications. A linear relation has been found between conductivity and deformations up to 10% strain, which means that such materials could be used for applications such as strain or pressure sensors. Cyclic experiments were conducted to establish whether the linear relation was reversible, which is an important requirement for sensor materials.

Improvement in thermal conductivity and mechanical properties of ethylene-propylene-diene monomer rubber by expanded graphite

2015 ◽  
Vol 38 (5) ◽  
pp. 870-876 ◽  
Author(s):  
Shaojian He ◽  
Yankai Lin ◽  
Lin Chen ◽  
Shanqiao Cao ◽  
Jun Lin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Expanded Graphite ◽  
Ethylene Propylene Diene Monomer ◽  
Ethylene Propylene

scholarly journals Time-Stability Dispersion of MWCNTs for the Improvement of Mechanical Properties of Portland Cement Specimens

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4149
Author(s):  
Laura M. Echeverry-Cardona ◽  
Natalia Álzate ◽  
Elisabeth Restrepo-Parra ◽  
Rogelio Ospina ◽  
Jorge H. Quintero-Orozco
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Raman Spectroscopy ◽  
Portland Cement ◽  
Time Stability ◽  
Cement Pastes ◽  
Multi Wall Carbon Nanotubes ◽  
Vis Spectroscopy ◽  
The Stability ◽  
Over Time

This study shows the energy optimization and stabilization in the time of solutions composed of H2O + TX-100 + Multi-Wall Carbon Nanotubes (MWCNTs), used to improve the mechanical properties of Portland cement pastes. For developing this research, sonication energies at 90, 190, 290, 340, 390, 440, 490 and 590 J/g are applied to a colloidal substance (MWCNTs/TX-100 + H2O) with a molarity of 10 mM. Raman spectroscopy analyses showed that, for energies greater than 440 J/g, there are ruptures and fragmentation of the MWCNTs; meanwhile at energies below 390 J/g, better dispersions are obtained. The stability of the dispersion over time was evaluated over 13 weeks using UV-vis spectroscopy and Zeta Potential. With the most relevant data collected, sonication energies of 190, 390 and 490 J/g, at 10 mM were selected at the first and the fourth week of storage to obtain Portland cement specimens. Finally, we found an improvement of the mechanical properties of the samples built with Portland cement and solutions stored for one and four weeks; it can be concluded that the MWCNTs improved the hydration period.

Sign in / Sign up

Export Citation Format

Share Document