French Industrial Vitrification Plant: 30 Years Old and Still Innovating

2009 ◽  
Vol 1193 ◽  
Author(s):  
E. Chauvin ◽  
C. Ladirat ◽  
R. Do Quang
Keyword(s):  
Continuous Improvement ◽  
Spent Nuclear Fuel ◽  
Atomic Energy Commission ◽  
Liquid Waste ◽  
Fission Products ◽  
High Level Liquid Waste ◽  
Final Volume ◽  
High Level ◽  
Selection Of

AbstractIn 2008, AREVA NC Industrial Vitrification of High-Level Liquid Waste blows out its 30th candle, with always two main objectives during all the time: containment of the long lived fission products and reduction of the final volume of waste. During all this time AREVA with the French Atomic Energy Commission (CEA) developed and use in their industrial installations a selection of borosilicate glass that have been demonstrated as the most suitable containment matrix for waste from spent nuclear fuel. Consistent and long-term R&D programs associated to industrial feed back from operation have enabled continuous improvement of the process: throughput and waste loading factor enhancement. The Vitrification Process used and currently implemented in the AREVA facilities will be described.

scholarly journals Vitrification of HLW Produced by Uranium/Molybdenum Fuel Reprocessing in COGEMA’s Cold Crucible Melter

2003 ◽  
Author(s):  
R. Do Quang ◽  
V. Petitjean ◽  
F. Hollebecque ◽  
O. Pinet ◽  
T. Flament ◽  
...  
Keyword(s):  
Atomic Energy Commission ◽  
Liquid Waste ◽  
Glass Layer ◽  
Cold Crucible ◽  
High Level Liquid Waste ◽  
Process Waste ◽  
Glass Formulation ◽  
High Level ◽  
Fuel Reprocessing ◽  
High Frequency Induction

The performance of the vitrification process currently used in the La Hague commercial reprocessing plants has been continuously improved during more than ten years of operation. In parallel COGEMA (industrial Operator), the French Atomic Energy Commission (CEA) and SGN (respectively COGEMA’s R&D provider and Engineering) have developed the cold crucible melter vitrification technology to obtain greater operating flexibility, increased plant availability and further reduction of secondary waste generated during operations. The cold crucible is a compact water-cooled melter in which the radioactive waste and the glass additives are melted by direct high frequency induction. The cooling of the melter produces a soldified glass layer that protects the melter’s inner wall from corrosion. Because the heat is transferred directly to the melt, high operating temperatures can be achieved with no impact on the melter itself. COGEMA plans to implement the cold crucible technology to vitrify high level liquid waste from reprocessed spent U-Mo-Sn-Al fuel (used in gas cooled reactor). The cold crucible was selected for the vitrification of this particularly hard-to-process waste stream because it could not be reasonably processed in the standard hot induction melters currently used at the La Hague vitrification facilities: the waste has a high molybdenum content which makes it very corrosive and also requires a special high temperature glass formulation to obtain sufficiently high waste loading factors (12% in molybednum). A special glass formulation has been developed by the CEA and has been qualified through lab and pilot testing to meet standard waste acceptance criteria for final disposal of the U-Mo waste. The process and the associated technologies have been also being qualified on a full-scale prototype at the CEA pilot facility in Marcoule. Engineering study has been integrated in parallel in order to take into account that the Cold Crucible should be installed remotely in one of the R7 vitrification cell. This paper will present the results obtained in the framework of these qualification programs.

Agents and Processes Design for TRU Elements Back Extraction in TRPO Process

2009 ◽  
Author(s):  
Meng Wei ◽  
Xuegang Liu ◽  
Jing Chen
Keyword(s):  
Organic Phase ◽  
Liquid Waste ◽  
Back Extraction ◽  
High Level Liquid Waste ◽  
Trpo Process ◽  
Extraction Processes ◽  
Treatment And Disposal ◽  
High Level ◽  
Disposal Cost

To reduce the long-term risk of the high-level liquid waste (HLLW) and the waste disposal cost, transuranium (TRU) elements should be removed from HLLW. A so-called TRPO process has been developed by Chinese scientists to partition HLLW. In this process, the extractant, trialkyl phosphine oxide (TRPO), is able to extract TRU elements into organic phase completely, which makes the treatment and disposal of raffinate HLLW much easier. However, the treatment of extracted TRU elements in organic phase, in return, becomes new troublesome issue. Generally, there are three promising ways to treat the extracted TRU elements: (1)transmutation; (2)conditioning; (3)recycling U+Pu in Purex-TRPO Integrated Process. In any of the three ways, the back extraction agents and processes play significant roles. In this paper, the investigations on back extraction agents for TRU elements, such as TTHA, DTPA, AHA, HEDPA, DOGA, and carbonates are introduced. The corresponding back extraction processes and experimental results are reviewed.

Adsorption Materials Development for the Separation of Actinides and Specific Fission Products from High Level Waste

2014 ◽  
Vol 94 ◽  
pp. 103-110 ◽  
Author(s):  
Yue Zhou Wei ◽  
Shun Yan Ning ◽  
Qi Long Wang ◽  
Zi Chen ◽  
Yan Wu ◽  
...  
Keyword(s):  
Spent Nuclear Fuel ◽  
Selective Adsorption ◽  
Packed Column ◽  
Liquid Waste ◽  
Separation Method ◽  
High Level Waste ◽  
Small Scale ◽  
Fast Diffusion ◽  
High Level Liquid Waste ◽  
High Level

The long-term radiotoxicity of high level liquid waste (HLLW) generated in spent nuclear fuel reprocessing is governed by the content of several long-lived minor actinides (MA) and some specific fission product nuclides. To efficiently separate MA (Am, Cm) and some FPs such as Cs and Sr from the HLLW, we have been studying an advanced aqueous partitioning process, which uses selective adsorption as separation method. In this work, we prepared different types of porous silica-based organic/inorganic adsorbents with fast diffusion kinetics, improved chemical stability and low pressure drop in a packed column. So they are advantageously applicable to efficient separation of the MA and specific FP elements from HLLW. Adsorption and separation behaviors of the MA and some FP elements such as Cs and Sr were studied. Small scale separation tests using simulated and genuine nuclear waste solutions were carried out and the obtained results indicate that the proposed separation method based on selective adsorption is essentially feasible.

scholarly journals New trends in the reprocessing of spent nuclear fuel. Separation of minor actinides by solvent extraction

2016 ◽  
Vol 71 (1) ◽  
pp. 123
Author(s):  
Jerzy Narbutt
Keyword(s):  
Solvent Extraction ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fission Products ◽  
Natural Uranium ◽  
Heterocyclic Ligands ◽  
High Level Nuclear Waste ◽  
Extraction Processes ◽  
High Level

<p>Recycling of actinides from spent nuclear fuel by their selective separation followed by transmutation in fast reactors will optimize the use of natural uranium resources and minimize the long-term hazard from high-level nuclear waste. This paper describes solvent extraction processes recently developed, aimed at the separation of americium from lanthanide fission products as well as from curium present in the waste. Depicted are novel poly-N-heterocyclic ligands used as selective extractants of actinide ions from nitric acid solutions or as actinide-selective hydrophilic stripping agents.</p>

The Application Research of Concentration & Denitration Technology in Advanced Reprocessing Process

2012 ◽  
Vol 560-561 ◽  
pp. 637-643
Author(s):  
Yong Li ◽  
Xue Gang Liu ◽  
Jin Chen
Keyword(s):  
Nitric Acid ◽  
Nuclear Power ◽  
Liquid Waste ◽  
Fission Products ◽  
Extraction Process ◽  
Purex Process ◽  
Current Status ◽  
Spent Fuel ◽  
High Level Liquid Waste ◽  
High Level

The proper management of spent fuel arising from nuclear power production is a key issue for the sustainable development of nuclear energy. While conventional reprocessing process, PUREX process, was successful to recover uranium and plutonium, in recent years some countries have turned to focus on advanced reprocessing process, which features of partitioning of minor actinides (MA) and long-lived fission products(LLFP). Most advanced reprocessing processes under development involve new extractants and additional extraction cycles. In China, TRPO extraction process has been developed to partition MA/LLFP from high-level liquid waste(HLLW) since early 1980’s. In parallel to R&D work on separation technologies, studies on concentration & denitration process have been evolved to prepare feed solutions to suit qualifications of extraction. Industrially, concentration & denitration is the internationally recognized standard to treat HLLW released from PUREX before vitrification. It enables to minimize the volume of interim storage, to restrain the corrosion of storage tank, to recover nitric acid in HLLW and to reduce the required evaporation duty of the vitrification process. Generally, the constitution of concentrated HLLW has little impact on the following vitrification process. But when concentration & denitration acts as pretreatment process of partitioning, the composition of actinides, fission products, and nitric acid in concentrated HLLW solution plays significant role in extraction process. A series of technical issues relevant to the connection between concentration ﹠denitration and extractions should be solved. This paper describes current status of concentration & denitration technology utilized in industry and under reprocessing plants. The specific separation requirements in advanced reprocessing process and challenges to apply concentration & denitration process are addressed. Besides, concentration & denitration process was tested in laboratory to adjust feed solutions for TRPO and Cyanex301 partitioning. Results demonstrate its promising prospect in advanced reprocessing process.

Cooperation Solidification of Cesium and Strontium

2012 ◽  
Vol 482-484 ◽  
pp. 58-61 ◽  
Author(s):  
Ming Fen Wen ◽  
Bo Yu ◽  
Min Luo ◽  
Jing Chen
Keyword(s):  
Solvent Extraction ◽  
Molecular Sieve ◽  
Liquid Waste ◽  
Fission Products ◽  
Radioactive Cesium ◽  
Energy Technology ◽  
High Level Liquid Waste ◽  
New Energy ◽  
Extraction Processes ◽  
High Level

The presence of long-lived radionuclides is a challenge to the management of high level liquid waste (HLLW). Separation of minor acitinides and long-lived fission products from the HLLW by partitioning process has the potential of significantly decreasing the costs of the immobilization and disposal of the radioactive waste by minimizing waste volumes. Several solvent extraction processes have been developed and demonstrated at the Institute of Nuclear and New Energy Technology (INET) for the separation of transuranic elements, 90Sr and 137Cs. In this work, using modified zeolite molecular sieve as a sorbent carrier, four kinds of solidification were prepared by soakage- absorption- calcination methods. It was found that the sample (HZCS-75) calcinated at 750°C was formed pollucite, a zeolite mineral, which will provide an option to immobilize the radioactive cesium and strontium.

TRLIFS study of Eu(III) spectroscopic properties to obtain structural and thermodynamic informations on lanthanide-malonamide complexes in the Eu(III)/NaNO3/TetraEthylMalonAmide system

2004 ◽  
Vol 92 (7) ◽  
Author(s):  
Laurent Couston ◽  
M. C. Charbonnel ◽  
J. L. Flandin ◽  
Christophe Moulin ◽  
F. Rancier
Keyword(s):  
Liquid Waste ◽  
Fission Products ◽  
Spectroscopic Properties ◽  
High Level Liquid Waste ◽  
Trivalent Actinides ◽  
Nuclear Fuel Reprocessing ◽  
Chemical Studies ◽  
High Level ◽  
Fuel Reprocessing ◽  
The Eu

SummaryImprovement of the nuclear fuel reprocessing involves separating the minor actinides (Am(III) and Cm(III)) from the fission products. In the French strategy, the first step consists in the separation of the trivalent actinides and lanthanides from high-level liquid waste, for which malonamides RR´NCO(CHR´´)CONRR´ are promising ligands. These molecules have been optimized for reprocessing but still require basic chemical studies to describe the complexation mechanisms at a molecular scale. This paper discusses a thermodynamic and structural study of a Ln(III)-malonamide complex formed with the hydrosoluble tetraethylmalonamide ligand (TEMA=(C

Sign in / Sign up

Export Citation Format

Share Document