Critical Assessment of Sub-Bandgap Primary Photocurrent in a-Si:H Based Solar Cells.

1991 ◽  
Vol 219 ◽  
Author(s):  
T. X. Zhou ◽  
S. S. Hegedus ◽  
C. M. Fortmann
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Defect Density ◽  
Critical Assessment ◽  
Cell Performance ◽  
Significant Discrepancy ◽  
Solar Cell Performance ◽  
Before And After ◽  
Degree Of Degradation

ABSTRACTThe sub-bandgap primary photocurrent and the solar cell performance of a-Si:H p-i-n devices have been studied before and after light induced degradation. The results indicate significant discrepancy between the two methods when used to estimate the degree of degradation and the defect density in the i-layers. A preliminary explanation is proposed.

Optimisation of diketopyrrolopyrrole:fullerene solar cell performance through control of polymer molecular weight and thermal annealing

2014 ◽  
Vol 2 (45) ◽  
pp. 19282-19289 ◽  
Author(s):  
Zhenggang Huang ◽  
Elisa Collado Fregoso ◽  
Stoichko Dimitrov ◽  
Pabitra Shakya Tuladhar ◽  
Ying Woan Soon ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Solar Cells ◽  
Solar Cell ◽  
Thermal Annealing ◽  
Bulk Heterojunction ◽  
Cell Performance ◽  
Polymer Molecular Weight ◽  
Solar Cell Performance ◽  
Heterojunction Solar Cells ◽  
Bulk Heterojunction Solar Cells

The performance of bulk heterojunction solar cells based on a novel donor polymer DPP-TT-T was optimised by tuning molecular weight and thermal annealing.

Synergistic improvements in the performance and stability of inverted planar MAPbI3-based perovskite solar cells incorporating benzylammonium halide salt additives

2021 ◽  
Author(s):  
Hung-Cheng Chen ◽  
Jie-Min Lan ◽  
Hsiang-Lin Hsu ◽  
Chia-Wei Li ◽  
Tien-Shou Shieh ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Optical Properties ◽  
Solar Cells ◽  
Solar Cell ◽  
Surface Morphology ◽  
Perovskite Solar Cells ◽  
Cell Performance ◽  
Solar Cell Performance ◽  
Halide Salt

Three different benzylammonium halide (Cl, Br, and I) salts were investigated to elucidate their effects as additives on MAPbI3 perovskite surface morphology, crystal structure, optical properties, and solar cell performance and stability.

Annealing Kinetics of Amorphous Silicon Alloy Solar Cells Made at Various Deposition Rates

2001 ◽  
Vol 664 ◽  
Author(s):  
Baojie Yana ◽  
Jeffrey Yanga ◽  
Kenneth Lord ◽  
Subhendu Guha
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Amorphous Silicon ◽  
High Frequency ◽  
Room Temperature ◽  
Defect Density ◽  
Very High Frequency ◽  
Solar Cell Performance ◽  
Kinetics Of ◽  
Very High

ABSTRACTA systematic study has been made of the annealing kinetics of amorphous silicon (a-Si) alloy solar cells. The cells were deposited at various rates using H2 dilution with radio frequency (RF) and modified very high frequency (MVHF) glow discharge. In order to minimize the effect of annealing during light soaking, the solar cells were degraded under 30 suns at room temperature to quickly reach their saturated states. The samples were then annealed at an elevated temperature. The J-V characteristics were recorded as a function of annealing time. The correlation of solar cell performance and defect density in the intrinsic layer was obtained by computer simulation. Finally, the annealing activation energy distribution (Ea) was deduced by fitting the experimental data to a theoretical model. The results show that the RF low rate solar cell with high H2 dilution has the lowest Ea and the narrowest distribution, while the RF cell with no H2 dilution has the highest Ea and the broadest distribution. The MVHF cell made at 8Å/s withhigh H2 dilution shows a lower Ea and a narrower distribution than the RF cell made at 3 Å/s, despite the higher rate. We conclude that different annealing kinetics plays an important role in determining the stabilized performance of a-Si alloy solar cells.

scholarly journals The effect of ZnO/ZnSe core/shell nanorod arrays photoelectrodes on PbS quantum dot sensitized solar cell performance

2020 ◽  
Vol 2 (1) ◽  
pp. 286-295 ◽  
Author(s):  
M. Kamruzzaman
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Quantum Dot ◽  
Cell Performance ◽  
Core Shell ◽  
Zno Nanorod ◽  
Nanorod Arrays ◽  
Solar Cell Performance ◽  
Sensitized Solar Cells ◽  
Pbs Quantum Dot

ZnO nanorod (NR) based inorganic quantum dot sensitized solar cells have gained tremendous attention for use in next generation solar cells.

scholarly journals Improving the all-polymer solar cell performance by adding a narrow bandgap polymer as the second donor

RSC Advances ◽  
2020 ◽  
Vol 10 (63) ◽  
pp. 38344-38350
Author(s):  
Kai Wang ◽  
Sheng Dong ◽  
Xudong Chen ◽  
Ping Zhou ◽  
Kai Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Polymer Solar Cell ◽  
Polymer Solar Cells ◽  
Cell Performance ◽  
Solar Cell Performance ◽  
Narrow Bandgap

Ternary all-polymer solar cells are fabricated using an N2200 acceptor and two donor polymers (PF2 and PM2) with complementary absorption.

Improvement of D–π–A organic dye-based dye-sensitized solar cell performance by simple triphenylamine donor substitutions on the π-linker of the dye

2017 ◽  
Vol 1 (6) ◽  
pp. 1059-1072 ◽  
Author(s):  
N. Prachumrak ◽  
T. Sudyoadsuk ◽  
A. Thangthong ◽  
P. Nalaoh ◽  
S. Jungsuttiwong ◽  
...  
Keyword(s):  
Solar Cells ◽  
Solar Cell ◽  
Dye Sensitized Solar Cells ◽  
Organic Dye ◽  
Cell Performance ◽  
Dye Sensitized Solar Cell ◽  
Solar Cell Performance ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Three new D–π–A dyes containing different numbers of triphenylamine donor substitutions on a π-linker were synthesized for dye-sensitized solar cells.

Sign in / Sign up

Export Citation Format

Share Document