Interfacial Properties of As-Received and Coated SiC (SCS-6) Fiber Reinforced Reaction-Formed SiC Matrix Composites

1994 ◽  
Vol 365 ◽  
Author(s):  
Paula J. Gaeta ◽  
Richard D. Sisson ◽  
M. Singh ◽  
Jeffrey I. Eldridge
Keyword(s):  
Shear Strength ◽  
Interfacial Shear Strength ◽  
Interfacial Shear ◽  
Ceramic Fiber ◽  
Second Phase ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Strength Failure ◽  
Sic Fiber ◽  
The Matrix

ABSTRACTThe possibility of improving the interfacial shear strength of the SiC fiber reinforced SiC matrix composite system was examined. A ceramic fiber coating was chosen based on availability and chemical stability with the fiber and matrix. Fiber push-out tests conducted on as-received and coated fiber reinforced composite samples allowed characterization of the interfacial shear strength. Average debond shear and frictional sliding stresses were calculated. The effects of sample thickness and second phase addition in the matrix were also evaluated. Tested samples were examined by SEM to determine the location of the interfacial failure and to determine if any interface reactions had occurred. The coating was then evaluated based on the resulting interfacial shear strength, failure location, and integrity of the interface as compared to those properties of samples reinforced with as-received fibers.

scholarly journals Hi-NicalonTM Fiber-Reinforced CVI-SiC Matrix Composites: II Interfacial Shear Strength and Its Effects on the Flexural Properties

2002 ◽  
Vol 43 (10) ◽  
pp. 2574-2577 ◽  
Author(s):  
Wen Yang ◽  
Hiroshi Araki ◽  
Akira Kohyama ◽  
Yutai Katoh ◽  
Quanli Hu ◽  
...  
Keyword(s):  
Shear Strength ◽  
Interfacial Shear Strength ◽  
Interfacial Shear ◽  
Flexural Properties ◽  
Matrix Composites ◽  
Fiber Reinforced

scholarly journals Evaluation of Interfacial Fracture Toughness and Interfacial Shear Strength of Typha Spp. Fiber/Polymer Composite by Double Shear Test Method

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2225 ◽  
Author(s):  
Ikramullah ◽  
Samsul Rizal ◽  
Yoshikazu Nakai ◽  
Daiki Shiozawa ◽  
H.P.S. Abdul Khalil ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Interfacial Shear Strength ◽  
Epoxy Composite ◽  
Interfacial Fracture ◽  
Interfacial Shear ◽  
Composite Model ◽  
Interfacial Fracture Toughness ◽  
Double Shear ◽  
The Matrix

The aim of this paper is to evaluate the Mode II interfacial fracture toughness and interfacial shear strength of Typha spp. fiber/PLLA and Typha spp. fiber/epoxy composite by using a double shear stress method with 3 fibers model composite. The surface condition of the fiber and crack propagation at the interface between the fiber and the matrix are observed by scanning electron microscope (SEM). Alkali treatment on Typha spp. fiber can make the fiber surface coarser, thus increasing the value of interfacial fracture toughness and interfacial shear strength. Typha spp. fiber/epoxy has a higher interfacial fracture value than that of Typha spp. fiber/PLLA. Interfacial fracture toughness on Typha spp. fiber/PLLA and Typha spp. fiber/epoxy composite model specimens were influenced by the matrix length, fiber spacing, fiber diameter and bonding area. Furthermore, the interfacial fracture toughness and the interfacial fracture shear stress of the composite model increased with the increasing duration of the surface treatment.

scholarly journals Multiscale Modeling of Fiber Fragmentation Process in Aligned ZnO Nanowires Enhanced Single Fiber Composites

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Parisa Marashizadeh ◽  
Mohammad Abshirini ◽  
Jingyu Wang ◽  
Mrinal C. Saha ◽  
Yingtao Liu
Keyword(s):  
Shear Strength ◽  
Multiscale Modeling ◽  
Interfacial Shear Strength ◽  
Fiber Composites ◽  
Interfacial Shear ◽  
Zno Nanowires ◽  
Single Fiber ◽  
Computational Domain ◽  
The Matrix ◽  
Fiber Fragmentation

AbstractA three-dimensional multiscale modeling framework is developed to analyze the failure procedure of radially aligned zinc oxide (ZnO) enhanced single fiber composites (SFC) under tensile loading to understand the interfacial improvement between the fiber and the matrix. The model introduces four levels in the computational domain. The nanoscale analysis calculates the size-dependent material properties of ZnO nanowires. The interaction between ZnO nanowires and the matrix is simulated using a properly designed representative volume element at the microscale. At the mesoscale, the interface between the carbon fiber and the surrounding area is modeled using the cohesive zone approach. A combination of ABAQUS Finite element software and the failure criteria modeled in UMAT user subroutine is implemented to simulate the single fiber fragmentation test (SFFT) at the macroscale. The numerical results indicate that the interfacial shear strength of SFC can be improved up to 99% after growing ZnO nanowires on the fiber. The effect of ZnO nanowires geometries on the interfacial shear strength of the enhanced SFC is also investigated. Experimental ZnO nanowires enhanced SFFTs are performed on the fabricated samples to validate the results of the developed multiscale model. A good agreement between the numerical and the experimental results was observed.

Sign in / Sign up

Export Citation Format

Share Document