Silica nanoparticle-impregnated Kevlar (SNK) fabric has better specific ballistic performance in comparison to its neat counterparts. For multifunctional structural applications using lightweight composites, combining this improved ballistic functionality with an acoustic functionality is desirable. In this study, acoustic characterization of neat and SNK samples is conducted using the normal-incidence impedance tube method. Both the absorption coefficient and transmission loss (TL) are measured in the 60–6000 Hz frequency range. The influence of parameters such as number of layers of neat or treated fabric, percentage by weight of nanoparticle addition, spacing between fabric layers, and residual porosity is examined. It is found that while absorption decreases with an increase in nanoparticle addition for frequencies above about 2500 Hz, increasing the number of layers shifts peak absorption to lower frequencies. By introducing an air-gap behind the fabric layer, dominant low-frequency (1000–3000 Hz) absorption peaks are obtained that correlate well with natural modes of mass-equivalent thin plates. Examining the influence of residual porosity by laminating the SNK samples reveals that it contributes to about 30–50% of the total absorption. Above about 1500 Hz, 3–5 dB of TL increase is obtained for SNK samples vis-à-vis the neat samples. TL is found to increase beyond that of the neat sample above a threshold frequency when an air-gap is introduced between two SNK layers. With an increase in the weight of nanoparticle addition, measured TL tends to be closer to mass law predictions. This study demonstrates that SNK fabric could provide improved acoustic performance in addition to its ballistic capabilities, making it suitable for multifunctional applications and could form the basis for the development of simplified models to predict the structural acoustic response of such nanoparticle–fabric composites.
Fabrication and Characterization of Roll-to-Roll Printed Air-Gap Touch Sensors