A Longitudinal Study on Influence of Primary Facial Deformities on Maxillofacial Growth in Patients with Cleft Lip and Palate

2005 ◽  
Vol 42 (6) ◽  
pp. 633-640 ◽  
Author(s):  
Norifumi Nakamura ◽  
Akira Suzuki ◽  
Hideki Takahashi ◽  
Yasuo Honda ◽  
Masaaki Sasaguri ◽  
...  
Keyword(s):  
Surface Area ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Total Surface Area ◽  
3D Analysis ◽  
Alar Base ◽  
Angular Measurements ◽  
Ocular Hypertelorism

Objective The goal of this study was to use three-dimensional (3D) analysis to characterize the primary facial deformities in children with unilateral cleft lip and palate (UCLP) and then serially analyze the relationships between facial deformities and maxillofacial growth from infancy to adolescence. Participants Twenty-one Japanese subjects with unilateral cleft lip and alveolus (UCLA) and 20 with UCLP who had been operated on and then followed up for more than 15 years were enrolled in this study. Main Outcome Measures Facial cast models taken at cheiloplasty were scanned with a 3D laser scanner. Lateral cephalographs taken when subjects were 15 years of age or older were traced, and linear and angular measurements were calculated. The correlation between primary facial forms and maxillofacial morphology in adolescence was analyzed. Results Three-dimensional analysis showed larger ocular hypertelorism, wider cleft, greater deviation of the columella base, and more severe retruded position of the affected nasal alar base in subjects with UCLP than those with UCLA. Total surface area of the upper lips in subjects with UCLP was significantly smaller than those with UCLA. Correlation analyses revealed that the width of cleft lip, deviation of the columella base, difference of the nose base width, and surface area of the upper lip were statistically correlated with the maxillary length, the anterior position of the maxillary alveolar base, the posterior facial height, and the high angle of the mandible. Conclusion The subjects who had less severe facial deformities and more tissue volume of the upper lips at cheiloplasty showed better maxillofacial growth.

Evaluation of a Three-Dimensional Stereophotogrammetric Method to Identify and Measure the Palatal Surface Area in Children with Unilateral Cleft Lip and Palate

2016 ◽  
Vol 53 (1) ◽  
pp. 16-21 ◽  
Author(s):  
Marcio De Menezes ◽  
Ana Maria Cerón-Zapata ◽  
Ana Maria López-Palacio ◽  
Andrea Mapelli ◽  
Luca Pisoni ◽  
...  
Keyword(s):  
Surface Area ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional

Three-Dimensional Analysis of Morphological Changes in the Maxilla of Patients with Cleft Lip and Palate

2002 ◽  
Vol 39 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Bert Braumann ◽  
Ludger Keilig ◽  
Christoph Bourauel ◽  
Andreas Jäger
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Computer Software ◽  
Reference Points ◽  
Starting Point ◽  
Ideal Tool ◽  
Infant Orthopedics

Objective Three-dimensional (3-D) morphological changes in the maxilla of patients with cleft lip and palate (CLP) have been recorded, mainly using two-dimensional cast analyses. Although these seem to be insufficient, no standardized 3-D method has been developed until now. In this study, accuracy, precision, and validity of a newly developed 3-D digital computer-aided procedure to visualize and metrically analyze the growth of the edentulous maxilla of infants with CLP have been evaluated. Patients The method was applied to 10 infants with complete unilateral CLP. Interventions Consecutive casts of the maxilla (1 week and 3, 6, and 12 months) of each patient were optically measured with a 3-D laser scanner. Following digitizing, the casts were computer reconstructed, aligned, and superimposed using specialized computer software. The distances between the surfaces were measured. Additionally, the surfaces were segmented perpendicular to the alveolar crest, the reference points being C1, C1′, C2, C2′, and I. The volumes of the resulting segments were determined and compared with one another. Results The newly developed analysis enables a visualization of the extent and direction of morphological changes in the maxilla of infants with CLP. With this method it is possible to quantify these changes of the volume of defined alveolar segments. Conclusions The 3-D analysis developed is an ideal tool for the examination of 3-D morphological changes in the edentulous maxilla of patients with CLP. The results will serve as the starting point for a longitudinal study on the efficacy of different methods, not only of presurgical infant orthopedics but also of surgical procedures.

Effectiveness of the Nasal Creator Device after Cheiloplasty in Patients with Cleft Lip and Palate as Measured by 3D Stereophotogrammetry

2021 ◽  
Vol 45 (4) ◽  
pp. 284-290
Author(s):  
Sulawan Waewsanga ◽  
Poonsak Pisek ◽  
Palakorn Surakunprapha ◽  
Surasith Piyasin ◽  
Araya Pisek
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Repeated Measure ◽  
Measure Anova ◽  
Affected Side ◽  
Alar Base ◽  
3D Stereophotogrammetry ◽  
A Prospective Study ◽  
Base Width

Objective: To evaluate nostril morphology post-cheiloplasty after patients with unilateral cleft lip and palate (UCLP) use of the nasal creator device. Study Design: This is a prospective study. Sixteen patients with nonsyndromic UCLP treated at Khon Kaen University underwent cheiloplasty and then wear the nasal creator device for 6 months. Three-dimensional images were taken, from which 5 lines and 8 landmark points were evaluated prior to (T0) and 1 day (T1), 1 month (T2), 3 months (T3), and 6 months (T4) after cheiloplasty. A Repeated Measure ANOVA was used to evaluate nostril changes between time periods and a paired t-test was used to compare values between the affected and non-affected side at T4 (P < .05). Results: On the affected side, the nostril height significantly increased from T0 (2.46±0.89 mm) to T4 (4.22±1.03 mm), and the nostril width significantly decreased from T0 (9.46±2.57 mm) to T4 (7.34±1.41 mm). On the non-affected side, the nostril height significantly increased from T0 (3.39±0.78 mm) to T4 (4.65±1.07 mm), and the nostril width was not significantly different from T0 (6.00±1.25 mm) to T4 (6.59±0.95 mm). The alar base width was not significantly different between T0 (30.18±2.72 mm) and T4 (29.82±1.69 mm). Nostril height and width were not significantly different by T4 when comparing the affected and non-affected sides. Conclusion: Using nasal creator device for 6 months significantly increased the nostril height and decreased nostril width and alar base width after cheiloplasty.

Facial Symmetry in Unilateral Cleft Lip and Palate following Alar Base Augmentation with Bone Graft: A Three-Dimensional Assessment

2007 ◽  
Vol 44 (4) ◽  
pp. 391-395 ◽  
Author(s):  
Mark F. Devlin ◽  
Arup Ray ◽  
Peter Raine ◽  
Adrian Bowman ◽  
Ashraf F. Ayoub
Keyword(s):  
Bone Graft ◽  
Bone Grafting ◽  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Facial Symmetry ◽  
Alar Base ◽  
Student’S T ◽  
A Prospective Study ◽  
Dimensional Assessment

Objective: The aim of this study was to assess the outcome of bone grafting using a corticocancellous block of iliac crest to reconstruct the support for the deformed, volume-deficient alar base in treated patients with unilateral cleft lip and palate (UCLP). The main outcome being measured was nasal symmetry. Design: This was a prospective study using a noninvasive three-dimensional stereophotogrammetry system (C3D) to assess the position of the alar base. Images were captured immediately preoperatively and at 6 months following the augmentation of the alar base with a block of bone graft. These images were used to calculate facial symmetry scores and were compared using a two sample Student's t test to assess the efficacy of the surgical method in reducing facial/nasal asymmetry. Patients: This investigation was conducted on 18 patients with one patient failing to attend for follow-up. The results for 17 patients are presented. Results: Facial symmetry scores improved significantly following the insertion of the bone graft at the deficient alar base (p = 0.005). Conclusions: 3D stereophotogrammetry is a noninvasive, accurate, and archiveable method of assessing facial form and surgical change. Nasal symmetry can be quantified and measured reliably with this tool. Bone grafting to the alar base region of treated UCLP patients with volume deficiency produces improvement in nasal symmetry.

Patterns of Maxillary Alveolar Arch Growth Changes of Infants with Unilateral Cleft Lip and Palate: Preliminary Findings

2003 ◽  
Vol 40 (4) ◽  
pp. 363-372 ◽  
Author(s):  
Bert Braumann ◽  
Ludger Keilig ◽  
Angelika Stellzig-Eisenhauer ◽  
Christoph Bourauel ◽  
Stefaan Bergé ◽  
...  
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Laser Scanner ◽  
First Year ◽  
Osteoplastic Surgery ◽  
Growth Changes ◽  
Crest Length ◽  
First Year Of Life

Objective Because of significant differences in pathomorphology at birth, it may be that a better treatment outcome prognosis exists for patients with incomplete versus complete cleft forms. Can reaction patterns be extracted from changes in maxillary dimensions of different cleft forms within the first year of life to support this hypothesis? Subjects Chronologically consecutive casts of the maxilla (1 week and 3, 6, and 12 months of life) of 15 patients with complete unilateral cleft lip and palate (cUCLP) and 13 patients with incomplete unilateral cleft lip and palate (iUCLP). All patients were treated with passive palatal plates. Cheiloplasty was performed at 6 months of age. No primary osteoplastic surgery was carried out. Interventions Following digitizing with a three-dimensional laser scanner, all cast surfaces were computer reconstructed, aligned, and superimposed. Distances between the surfaces were determined and expressed graphically. Computer-aided determination of defined maxillary dimensions was performed. The volumes of segmented surfaces were determined and compared. Results Within the first year of life, decreased sagittal but increased transverse alveolar growth for patients with iUCLP was found. The increase in alveolar crest length in patients with iUCLP was 50% less within the first year of life than in patients with cUCLP. In the same patients, the volumes of the molar segments were, on average, larger at each registration stage and the increase in these volumes larger within the first year of life. Conclusion Conclusions regarding the direction and extent of growth cannot be drawn from the visible level of severity of the malformation.

scholarly journals Three-Dimensional Assessment of Morphological Changes Following Nasoalveolar Molding Therapy in Cleft Lip and Palate Patients: A Case Report

2019 ◽  
Vol 7 (1) ◽  
pp. 27 ◽  
Author(s):  
Edoardo Staderini ◽  
Romeo Patini ◽  
Andrea Camodeca ◽  
Federica Guglielmi ◽  
Patrizia Gallenzi
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Morphological Changes ◽  
Three Dimensional ◽  
Dimensional Changes ◽  
Technological Advances ◽  
Angular Measurements ◽  
The Face ◽  
Three Dimensional Images ◽  
Nasoalveolar Molding

The applications of computer-guided technologies for three-dimensional image analysis provide a unique opportunity to quantify the morphological dimensional changes of the face in a practical and convenient way. Symmetry of the nasolabial area is one of the main factors of facial attractiveness as well as being the main objective of the treatment of cleft lip and palate (CLP). Technological advances in computer-guided visualization modes and their applications to three-dimensional stereophotogrammetry provide more practical opportunities and alternatives for facial analysis. Each study, however, uses different protocols for the acquisition and analysis of three-dimensional images. In addition, each study identifies different anthropometric points and calculates linear and angular measurements with overlapping protocols. Therefore, it is appropriate to define a standardization of the three-dimensional analysis of CLP patients to compare the studies of different research centers. The aim of this report is to propose a protocol to standardize the acquisition and analysis of three-dimensional images to evaluate the three-dimensional changes in the nasolabial area in cleft lip and palate patients undergoing pre-surgical nasoalveolar molding (PNAM).

Dentoalveolar Growth of Patients with Complete Unilateral Cleft Lip and Palate by Early Two-Stage Furlow and Push-Back Method: Preliminary Results

2004 ◽  
Vol 41 (5) ◽  
pp. 519-525 ◽  
Author(s):  
Taiji Kitagawa ◽  
Hiroshi Kohara ◽  
Taiji Sohmura ◽  
Junzo Takahashi ◽  
Takashi Tachimura ◽  
...  
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Japanese Patients ◽  
Horizontal Direction ◽  
Two Stage ◽  
Cross Sectional ◽  
Growth Changes ◽  
Deciduous Molar

Objective This study examined dentoalveolar growth changes prior to the time of palatoplasty up to 3 years of age by the early two-stage Furlow and push-back methods. Subjects Thirty-four Japanese patients with complete unilateral cleft lip and palate (UCLP) treated with either a two-stage Furlow procedure (Furlow group: seven boys, eight girls) from 1998 to 2002 or a push-back procedure (push-back group; 12 boys, 7 girls) from 1993 to 1997. Method Consecutive plaster models were measured by three-dimensional laser scanner, before primary palatoplasty, before hard palate closure (Furlow group only), and at 3 years of age. Bite measures were taken at 3 years of age. Results In the Furlow group, arch length, canine width, first and second deciduous molar width and cross-sectional area, and depth and volume at midpoint showed greater growth than in the push-back group. In the Furlow group, the crossbite score was also better than in the push-back group at 3 years of age. In comparison with the push-back group, inhibition of growth impediment in the anterior region was observed in the horizontal direction in the Furlow group. In the midregion, it was observed in the horizontal and vertical directions, and in the posterior region it was observed in the horizontal direction. Conclusion The results demonstrate that the early two-stage Furlow method showed progressive alveolar growth. Therefore, the early two-stage Furlow method is a more beneficial procedure than the push-back method.

Precision of Landmark Positioning on Digitized Models from Patients with Cleft Lip and Palate

2006 ◽  
Vol 43 (2) ◽  
pp. 168-173 ◽  
Author(s):  
Jakob Brief ◽  
Jan H. Behle ◽  
Angelika Stellzig-Eisenhauer ◽  
Stefan Hassfeld
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Plaster Cast ◽  
Anatomical Landmarks ◽  
Positioning Error ◽  
The University ◽  
Plaster Models ◽  
The Ideal

Objective To quantify the precision of landmark positioning on digitized casts of patients with unilateral cleft lip and palate. Patients Forty plaster models of newborns up to 8 months of age were selected from the archive of the Department of Orthodontics of the University of Heidelberg. Material and Method The plaster-cast models were digitized with a Micromeasure 70 three-dimensional laser scanner (Micromeasure, Bischoffen, Germany). The laser scanner used in this study operates with a precision of 0.15 mm on the x- and y-axes and 0.06 mm on the z-axis. In the intraobserver study, a single observer placed anatomical landmarks in four rounds, with at least 4 weeks between each round. In the interobserver study, four different observers each placed the same landmarks once. For the two different studies, an ideal location for each landmark was calculated by averaging the landmark positions of the four rounds or observers. The distance between each of the four landmark positions and the ideal landmark was measured. Results A 95% confidence interval for the landmark positioning error was calculated. For the intraobserver investigation, this error was 0.34 to 1.30 mm, and for the interobserver investigation it was 0.7 to 2.00 mm. Conclusion Because both investigations displayed comparable error intervals, it was concluded that different observers could perform landmark positioning for the same studies.

Digital Surface Photogrammetry for Anthropometric Analysis of the Cleft Infant Face

2006 ◽  
Vol 43 (3) ◽  
pp. 350-355 ◽  
Author(s):  
Michael Krimmel ◽  
Susanne Kluba ◽  
Margit Bacher ◽  
Klaus Dietz ◽  
Siegmar Reinert
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Upper Lip ◽  
Facial Deformity ◽  
Alar Base ◽  
Healthy Infants ◽  
Standard Values ◽  
Base Width ◽  
Plaster Casts

Objective To analyze the three-dimensional morphology of the cleft infant face with digital surface photogrammetry. Design Fifty plaster casts of unoperated infants with cleft lip and palate were imaged three-dimensionally with digital surface photogrammetry. Twenty-one standard craniofacial measurements were taken. The plaster casts were divided into 4 groups with unilateral, bilateral, complete, and incomplete clefts of the lip and palate. The measurements were compared with standard values for healthy infants. Results Significant differences (p < .0025) were found for the alar base width (33% to 55%), the alar base root width (59% to 103%), the width of the nose (7% to 25%), the length of the alar wing (18% to 25%), and the intercanthal (6% to 17%) and biocular (4% to 12%) width, depending on the cleft type. The vertical dimensions of the nose and the upper lip did not differ significantly from the controls. Conclusion This study describes preliminary data on the cleft infant facial deformity. The obtained results were mainly in agreement with data in the limited literature. Three-dimensional photogrammetry has proven to be reliable and can be applied more readily to potentially uncooperative patients.

Sign in / Sign up

Export Citation Format

Share Document