crest length
Recently Published Documents


TOTAL DOCUMENTS

66
(FIVE YEARS 21)

H-INDEX

10
(FIVE YEARS 3)

Author(s):  
Ketaki H. Kulkarni ◽  
Ganesh A. Hinge

Abstract Present study highlights the behavior of weir crest head and width parameter on the discharge coefficient of compound broad crested (CBC) weir. Computational fluid dynamics model (CFD) is validated with laboratory experimental investigations. In the discharge analysis through broad crested weirs, the upstream head over the weir crest (h) is crucial, where the result is mainly dependent upon the weir crest length (L) in transverse direction to flow, water depth from channel bed. Currently, minimal investigations are known for CFD validations on compound broad crested weirs. The hydraulic research for measuring discharge numerically is carried out using FLOW 3D software. The model applies renormalized group (RNG) using volume of fluid (VOF) method for improved accuracy in free surface simulations. Structured hexagonal meshes of cubic elements define discretized meshing. The comparative analysis of the numerical simulations and experimental observations confirm the performance of CBC weir for precise measurement of a wide range of discharges. Series of CFD model studies and experimental validation have led to constant range of discharge coefficients for various head over weir crest. The correlation coefficient of discharge predictions is 0.999 with mean error of 0.28%.


2021 ◽  
Author(s):  
Roya Biabani ◽  
Farzin Salmasi ◽  
Meysam Nouri ◽  
John Abraham

Abstract Gabion weirs have been widely used in rivers restoration and diversion water projects because of their hydro-environmental aspects and eco-friendly features. In this study, a series of laboratory tests were performed to investigate the effects of side ramp slope, crest length, and porous media properties on the flow regimes, water-surface profiles, discharge coefficients, and energy dissipation in embankment gabion weirs with upstream and downstream slopes. 24 physical models of solid and gabion weirs with three different upstream/downstream slopes (90°, 45° and 26.5°) were created. For gabion weirs, three different filling materials were tested. To investigate the complexity of flow over the porous-fluid interface and through the porous material, three-dimensional (3D) numerical simulations were developed. The results show that decreasing upstream slopes, from 90º to 26.5º, leads to decreased discharge coefficients. However, in all cases, gabion weirs lead to greater discharge coefficients than those of similar solid weirs. For milder side slopes, discharge ratios passing through all faces of the gabion weirs decreased nonlinearly. Moreover, with increasing the inlet discharge, relative energy dissipation was reduced up to 45% in gabion weirs.


2021 ◽  
Vol 13 (10) ◽  
pp. 1929
Author(s):  
Yury Yu. Yurovsky ◽  
Vladimir N. Kudryavtsev ◽  
Semyon A. Grodsky ◽  
Bertrand Chapron

The effective normalized radar cross section (NRCS) of breaking waves, σwb, is empirically derived based on joint synchronized Ka-band radar and video records of the sea surface from a research tower. The σwb is a key parameter that, along with the breaker footprint fraction, Q, defines the contribution of non-polarized backscattering, NP =σwbQ, to the total sea surface NRCS. Combined with the right representation of the regular Bragg and specular backscattering components, the NP component is fundamental to model and interpret sea surface radar measurements. As the first step, the difference between NRCS values for breaking and non-breaking conditions is scaled with the optically-observed Q and compared with the geometric optics model of breaker backscattering. Optically-derived Q might not be optimal to represent the effect of breaking waves on the radar measurements. Alternatively, we rely on the breaking crest length that is firmly detected by the video technique and the empirically estimated breaker decay (inverse wavelength) scale in the direction of breaking wave propagation. A simplified model of breaker NRCS is then proposed using the geometric optics approach. This semi-analytical model parameterizes the along-wave breaker decay from reported breaker roughness spectra, obtained in laboratory experiments with mechanically-generated breakers. These proposed empirical breaker NRCS estimates agree satisfactorily with observations.


Author(s):  
Md. Ayaz ◽  
Talib Mansoor

Abstract Triangular plan form weirs are advantageous over a normal weir in two ways. Within the limited channel width, use of such a weir increases the crest length and hence for a given head, increases the discharge and for a given discharge, reduces the head in comparison with a normal weir. In a previous study, researchers proposed an empirical equation to compute the discharge coefficient of a triangular plan form weir. The prediction error on the discharge coefficient was ±7% from the line of agreement. In the present study, an ANN model has been utilized to train randomly selected 70% data, with 15% tested and validation made for the remaining 15% data. The model predicts the discharge coefficient with a prediction error in the range of ±2.5% from the line of agreement, thereby decreasing the prediction error in Cd by 64%. Also, the sensitivity analysis of the developed ANN model has been performed for all the parameters (weir height, skew weir length and flow depth) involved in the study and the weir height was found to be the most sensitive parameter. Furthermore, the linked ANN–optimization model has been developed to find the optimal values of design parameters of a triangular plan form weir for maximum discharge.


2021 ◽  
Vol 13 (2) ◽  
pp. 731-740
Author(s):  
Gustavo Andrei Speckhann ◽  
Heidi Kreibich ◽  
Bruno Merz

Abstract. Dams are an important element of water resources management. Data about dams are crucial for practitioners, scientists, and policymakers for various purposes, such as seasonal forecasting of water availability or flood mitigation. However, detailed information on dams on the national level for Germany is so far not freely available. We present the most comprehensive open-access dam inventory for Germany (DIG) to date. We have collected and combined information on dams using books, state agency reports, engineering reports, and internet pages. We have applied a priority rule that ensures the highest level of reliability for the dam information. Our dam inventory comprises 530 dams in Germany with information on name, location, river, start year of construction and operation, crest length, dam height, lake area, lake volume, purpose, dam structure, and building characteristics. We have used a global, satellite-based water surface raster to evaluate the location of the dams. A significant proportion (63 %) of dams were built between 1950–2013. Our inventory shows that dams in Germany are mostly single-purpose (52 %), 53 % can be used for flood control, and 25 % are involved in energy production. The inventory is freely available through GFZ (GeoForschungsZentrum) Data Services (https://doi.org/10.5880/GFZ.4.4.2020.005) (Speckhann et al., 2020).


Author(s):  
Hasan Eleroğlu ◽  
Beyhan Yeter ◽  
Ökkeş Akyar

The aim of this study was to determine the effect of housing system on morphological characteristics of Atak-S cocks reared in closed and free range systems. Cocks were fed with standard feed according to feeding program for seventeen weeks. In order to determine the effect of the housing system on some morphological features and asymmetry, Crest length (İU), Crest width (İG), Eye width (GG), Nose length (BU), Face width (YG), Wattle length (SU), Beak length (GU) in bilateral features, measurements were made from the right and left sides on the head of the cocks. Furthermore, foot features such as Width of tarsometatarsus at the joint with tibiotarsus (EG), Length of tarsometatarsus (TU), Width at 1 cm above the spur of tarsometatarsus (MG1), Width of tarsometatarsus at the spur (MG2), Length of the back toe (AP), Length of the outer toe nail (DT), Length of the fourth phalanx of the outer toe (D4), Length of the third phalanx of the outer toe (D3), Length of the mid toe nail (OT), Length of the fourth phalanx of the mid toe (O4), Length of the third phalanx of the mid toe (O3) measurements were taken on the right and left feet of the cocks. All measurements were made in millimetres (0.01 mm) using a digital caliper. Relative asymmetry (GA) and fluctuating asymmetry (DA) values were calculated for the features showing bilateral symmetry. According to the statistical analysis on the obtained data, the morphological characteristics of ATAK-S cocks were not affected by the housing system, and that the characters underlined in both housing conditions developed in the same way as right and left.


2020 ◽  
Vol 74 (11) ◽  
Author(s):  
Mirjam J. Borger ◽  
Lauren E. Johnson ◽  
Nathaly O. Salazar ◽  
Cameron L. Dreghorn ◽  
Jan Komdeur ◽  
...  

Abstract Status signals have evolved for individuals to avoid energetic and physical costs of resource defense. These signals reflect an individual’s competitive ability and therefore influence competitors’ decisions on how to invest in a fight. We hypothesized that the response of receivers to status signals will depend on the social context. During territorial defense, group members may provide support to a territory owner by participating in defense. We investigated whether the presence of juveniles—who group together with territorial males—alters the territorial male’s attack decisions and level of aggression in the black-crested titmouse (Baeolophus atricristatus). Crest-length in this species functions as status signal. We simultaneously presented two taxidermic male models in a territory: one with an unmanipulated crest and one with a modified shortened crest. Models were presented to males that had resident juveniles cohabiting on their territory, and to males without juveniles. During intrusions, juveniles actively defended against the simulated intruders by approaching and sometimes attacking. The presence of juveniles affected how territorial males responded to the status signals of the intruders: when juveniles were present, males were more likely to first attack the model with the unmanipulated crest (i.e., longer, and more threatening), compared to males residing without juveniles. This suggests that juvenile support alters the risk-taking decision of the territorial male. To our knowledge, this is the first indication that behavioral responses to a status signal depends on the presence of supportive group members. Significance statement Status signals can indicate relative quality of animals and can therefore be used to evaluate a competitor when deciding whether or not to fight over resources. The black-crested titmouse has been shown to use its crest length as a status signal during fights over food. In our study, we assessed if this status signal is also used in territorial defense, by conducting an experiment where we presented two taxidermic male models with different crest sizes to a territorial male. We also investigated whether juvenile presence influenced which model was attacked. In trials where juveniles were present, territorial males attacked the longer crested model significantly more often than in trials where territorial males were alone. This suggests that the presence of juveniles, which help the male defend the territory, allows the male to attack the more aggressive-appearing intruder.


2020 ◽  
Author(s):  
Gustavo Andrei Speckhann ◽  
Heidi Kreibich ◽  
Bruno Merz

Abstract. Dams are an important element of water resources management. Data about dams are crucial for practitioners, scientists and policymakers for various purposes, such as seasonal forecasting of water availability or flood mitigation. However, detailed information on dams on the national level for Germany is so far not freely available. We present the most comprehensive, open-access dam inventory for Germany (DIG) to date. We have collected and combined information on dams using books, state agency reports, engineering reports, and internet pages. We have applied a priority rule that ensures the highest level of reliability for the dam information. Our dam inventory comprises 530 dams in Germany with information on name, location, river, start year of construction and operation, crest length, dam height, lake area, lake volume, purpose, dam structure and building characteristics. We have used a global, satellite-based water surface raster to evaluate the location of the dams. A significant part (63 %) of dams has been built between 1950–2013. Our inventory shows that dams in Germany are mostly single-purpose (52 %), 53 % can be used for flood control, and 25 % are involved in energy production. The inventory will be freely available through GFZ Data Services (https://doi.org/10.5880/GFZ.4.4.2020.005) after discussion. In the meantime the data can be downloaded using the following temporary link https://dataservices.gfz-potsdam.de/panmetaworks/review/09c134e13a7ede5d80d67f641d615698c05917fac25fc776240a110d2df96a66/ (Speckhann et al., 2020).


2020 ◽  
Vol 4 (2) ◽  
pp. 34-38
Author(s):  
Muhammad Israr Khan ◽  
Shuhong Wang ◽  
Zhangze .

In this paper, an earthen dam is analysed using different soil layers having different soil properties and dimensions. Normally a slope fail when the shear strength reduces from the minimum required value which keeps it stable. Internal erosion is the main cause which causes a dam to fail and it is mainly due seepage with time. A detail analysis of a predefined dam slope is performed in different layers to check the seepage variation as well as the factor of safety. Different soil layers and properties were used such that it is investigated from a fail condition to a complete stable condition. Limit equilibrium and finite element approaches are used. Correlations for factor of safety between these two approaches are also developed. These correlations and results could be used as guidelines in any dam or slope safety calculation.


Sign in / Sign up

Export Citation Format

Share Document