MODELING OF DEGRADATION OF THE COMPOSITE PROPERTIES ON CRACKING AND DELAMINATION WHEN SUBJECTED TO STATIC AND CYCLIC LOADING

2010 ◽  
Vol 1 (4) ◽  
pp. 315-331 ◽  
Author(s):  
Doan Chuck Luat ◽  
S. A. Lurie ◽  
A. A. Dudchenko
Keyword(s):  
Cyclic Loading ◽  
Static And Cyclic Loading ◽  
Composite Properties

Behaviour of RC beam repaired using alkali activated slag-based agent under static and cyclic loading

Structures ◽  
2021 ◽  
Vol 31 ◽  
pp. 761-768
Author(s):  
Sulaem Musaddiq Laskar ◽  
Ruhul Amin Mozumder ◽  
Aminul Islam Laskar
Keyword(s):  
Cyclic Loading ◽  
Rc Beam ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Static And Cyclic Loading ◽  
Alkali Activated

Crack resistance of structural steels under static and cyclic loading

1990 ◽  
Vol 22 (7) ◽  
pp. 965-970
Author(s):  
N. S. Kogut ◽  
V. N. Moskvichev ◽  
N. L. Kuklyak ◽  
L. I. Bozhenko ◽  
Yu. A. Suetin
Keyword(s):  
Cyclic Loading ◽  
Crack Resistance ◽  
Structural Steels ◽  
Static And Cyclic Loading

Mixed-Mode Fracturing of Rocks Under Static and Cyclic Loading

2012 ◽  
Vol 46 (5) ◽  
pp. 1035-1052 ◽  
Author(s):  
N. Erarslan ◽  
D. J. Williams
Keyword(s):  
Cyclic Loading ◽  
Mixed Mode ◽  
Static And Cyclic Loading

Using time domain reflectometry in triaxial testing

2000 ◽  
Vol 37 (6) ◽  
pp. 1325-1331
Author(s):  
J LH Grozic ◽  
M E Lefebvre ◽  
P K Robertson ◽  
N R Morgenstern
Keyword(s):  
Cyclic Loading ◽  
Water Content ◽  
Time Domain ◽  
Void Ratio ◽  
Time Domain Reflectometry ◽  
Volumetric Water Content ◽  
Degree Of Saturation ◽  
Triaxial Testing ◽  
Empirical Correlations ◽  
Static And Cyclic Loading

Time domain reflectometry (TDR) can be used to determine the volumetric water content of soils. This note describes the utilization of a TDR miniprobe in triaxial testing. The TDR performance was examined with a series of tests that not only proved its reliability but also resulted in two empirical correlations. Using these correlations, the degree of saturation and volumetric water content during triaxial testing could be determined. The TDR was then put to use in a laboratory program designed to investigate the response of loose gassy sand under static and cyclic loading. Because of the TDR measurements it was possible to determine the degree of saturation and void ratio of the gassy specimens. The TDR miniprobe proved to be accurate, simple to use, and inexpensive to build.Key words: time domain reflectometry, TDR, triaxial testing, gassy, unsaturated.

Effect of the liquid metal medium on the nature of failure of St3 steel in static and cyclic loading

1989 ◽  
Vol 24 (5) ◽  
pp. 446-449
Author(s):  
Yu. P. Surkov ◽  
V. G. Rybalko ◽  
T. S. Sycheva
Keyword(s):  
Cyclic Loading ◽  
Liquid Metal ◽  
Metal Medium ◽  
Liquid Metal Medium ◽  
St3 Steel ◽  
Static And Cyclic Loading

A Proximally-Adjustable Variable Length Intramedullary Nail: Ex Vivo Quasi-Static and Cyclic Loading Evaluation

2017 ◽  
Vol 11 (4) ◽  
Author(s):  
Mark J. Hedgeland ◽  
Alexander Martin Clark ◽  
Mario J. Ciani ◽  
Arthur J. Michalek ◽  
Laurel Kuxhaus
Keyword(s):  
Cyclic Loading ◽  
Mechanical Performance ◽  
Ex Vivo ◽  
Healing Process ◽  
Axial Loading ◽  
Torsional Stiffness ◽  
Axial Stiffness ◽  
Four Point Bending ◽  
Point Bend ◽  
Static And Cyclic Loading

An adjustable-length intramedullary (IM) nail may reduce both complications secondary to fracture fixation and manufacturing costs. We hypothesized that our novel nail would have suitable mechanical performance. To test this hypothesis, we manufactured three prototypes and evaluated them in quasi-static axial compression and torsion and quasi-static four-point bending. Prototypes were dynamically evaluated in both cyclic axial loading and four-point bending and torsion-to-failure. The prototypes exceeded expectations; they were comparable in both quasi-static axial stiffness (1.41 ± 0.37 N/m in cervine tibiae and 2.30 ± 0.63 in cadaver tibiae) and torsional stiffness (1.05 ± 0.26 N·m/deg in cervine tibiae) to currently used nails. The quasi-static four-point bending stiffness was 80.11 ± 09.360, greater than reported for currently used nails. A length-variance analysis indicates that moderate changes in length do not unacceptably alter bone-implant axial stiffness. After 103,000 cycles of axial loading, the prototype failed at the locking screws, comparable to locking screw failures seen clinically. The prototypes survived 1,000,000 cycles of four-point bend cyclic loading, as indicated by a consistent phase angle throughout cyclic loading. The torsion-to-failure test suggests that the prototype has adequate resistance to applied torques that might occur during the healing process. Together, these results suggest that our novel IM nail performs sufficiently well to merit further development. If brought to market, this adjustable-length IM nail could reduce both patient complications and healthcare costs.

scholarly journals Crack Propagation Behavior in Alumina Ceramic under Static and Cyclic Loading

1993 ◽  
Vol 36 (4) ◽  
pp. 354-360
Author(s):  
Yozo Sawaki ◽  
Yasuo Nagase ◽  
Hajime Yoshida ◽  
Akio Inoue ◽  
Tsuyoshi Fujiwara
Keyword(s):  
Cyclic Loading ◽  
Crack Propagation ◽  
Alumina Ceramic ◽  
Propagation Behavior ◽  
Static And Cyclic Loading ◽  
Crack Propagation Behavior

The Vertical Holding Capacity Of Marine Anchors In Sand And Clay Subjected To Static And Cyclic Loading

1973 ◽  
Author(s):  
Stanley M. Bemben ◽  
Edward H. Kalajian ◽  
Michael M. Kupferman
Keyword(s):  
Cyclic Loading ◽  
Static And Cyclic Loading
Sign in / Sign up

Export Citation Format

Share Document