MODELING BIO-OIL GASIFICATION BY A PLASMA PROCESS

2010 ◽  
Vol 14 (1-2) ◽  
pp. 11-27 ◽  
Author(s):  
H. Lorcet ◽  
M. Brothier ◽  
D. Guenadou ◽  
C. Latge ◽  
Armelle Vardelle
Keyword(s):  
Plasma Process ◽  
Bio Oil

Hydrogen production from a solution plasma process of bio-oil

2020 ◽  
Vol 45 (39) ◽  
pp. 20210-20215 ◽  
Author(s):  
Heejin Lee ◽  
Young-Kwon Park
Keyword(s):  
Hydrogen Production ◽  
Plasma Process ◽  
Bio Oil

Stable production of platform chemicals from the continuous hydrodeoxygenation of a raw bio-oil using enhanced carbon-based catalysts

2020 ◽  
Author(s):  
Idoia Hita ◽  
Tomas Cordero-Lanzac ◽  
Francisco J. Garcia-Mateos ◽  
Jose Rodriguez-Mirasol ◽  
Tomas Cordero ◽  
...  
Keyword(s):  
Platform Chemicals ◽  
Stable Production ◽  
Bio Oil ◽  
Carbon Based

Stable production of platform chemicals from the continuous hydrodeoxygenation of a raw bio-oil using enhanced carbon-based catalysts

2020 ◽  
Author(s):  
Idoia Hita ◽  
Tomas Cordero-Lanzac ◽  
Francisco J. Garcia-Mateos ◽  
Jose Rodriguez-Mirasol ◽  
Tomas Cordero ◽  
...  
Keyword(s):  
Platform Chemicals ◽  
Stable Production ◽  
Bio Oil ◽  
Carbon Based

Pyrolysis of brown algae (Bifurcaria Bifurcata) in a stainless steel tubular reactor: From a review to a case study

2018 ◽  
Vol 14 (1) ◽  
pp. 31-60 ◽  
Author(s):  
M. Y. Guida ◽  
F. E. Laghchioua ◽  
A. Hannioui
Keyword(s):  
Particle Size ◽  
Stainless Steel ◽  
Flow Rate ◽  
Brown Algae ◽  
Tubular Reactor ◽  
Nitrogen Flow ◽  
Nitrogen Flow Rate ◽  
Bifurcaria Bifurcata ◽  
Bio Oil

This article deals with fast pyrolysis of brown algae, such as Bifurcaria Bifurcata at the range of temperature 300–800 °C in a stainless steel tubular reactor. After a literature review on algae and its importance in renewable sector, a case study was done on pyrolysis of brown algae especially, Bifurcaria Bifurcata. The aim was to experimentally investigate how the temperature, the particle size, the nitrogen flow rate (N2) and the heating rate affect bio-oil, bio-char and gaseous products. These parameters were varied in the ranges of 5–50 °C/min, below 0.2–1 mm and 20–200 mL. min–1, respectively. The maximum bio-oil yield of 41.3wt% was obtained at a pyrolysis temperature of 600 °C, particle size between 0.2–0.5 mm, nitrogen flow rate (N2) of 100 mL. min–1 and heating rate of 5 °C/min. Liquid product obtained under the most suitable and optimal condition was characterized by elemental analysis, 1H-NMR, FT-IR and GC-MS. The analysis of bio-oil showed that bio-oil from Bifurcaria Bifurcata could be a potential source of renewable fuel production and value added chemicals.

Fuel Characterization of Bio-oil from Fast Pyrolysis of Tectona grandis in a Fixed Bed Reactor

2020 ◽  
Author(s):  
Pious Okekunle ◽  
Akinola Ogunsola ◽  
Oluwapelumi Babayemi ◽  
Emmanuel Abodunrin ◽  
Olanrewaju Daramola
Keyword(s):  
Fast Pyrolysis ◽  
Fixed Bed ◽  
Tectona Grandis ◽  
Fixed Bed Reactor ◽  
Bio Oil ◽  
Fuel Characterization

RANCANG BANGUN PERANGKAT EKSPERIMENTASI PROSES PIROLISIS BIOMASA GELOMBANG MIKRO

2013 ◽  
Vol 14 (2) ◽  
Author(s):  
Noor Fachrizal
Keyword(s):  
Large Scale ◽  
Continuous Model ◽  
Biomass Energy ◽  
Scale Model ◽  
Small Scale ◽  
Laboratory Apparatus ◽  
Liquid Form ◽  
Large Scale Model ◽  
Bio Oil ◽  
Pyrolysis Of Biomass

Biomass such as agriculture waste and urban waste are enormous potency as energy resources instead of enviromental problem. organic waste can be converted into energy in the form of liquid fuel, solid, and syngas by using of pyrolysis technique. Pyrolysis process can yield higher liquid form when the process can be drifted into fast and flash response. It can be solved by using microwave heating method. This research is started from developing an experimentation laboratory apparatus of microwave-assisted pyrolysis of biomass energy conversion system, and conducting preliminary experiments for gaining the proof that this method can be established for driving the process properly and safely. Modifying commercial oven into laboratory apparatus has been done, it works safely, and initial experiments have been carried out, process yields bio-oil and charcoal shortly, several parameters are achieved. Some further experiments are still needed for more detail parameters. Theresults may be used to design small-scale continuous model of productionsystem, which then can be developed into large-scale model that applicable for comercial use.

Pyrolysis of the Caupi Bean Pod (Vigna unguiculata): Characterization of Biomass and Bio-Oil

2020 ◽  
Author(s):  
Roberta Santos ◽  
Diego Bispo ◽  
Honnara Granja ◽  
Eliana Sussuchi ◽  
André Luis Ramos ◽  
...  
Keyword(s):  
Vigna Unguiculata ◽  
Bio Oil

Stabilization of Bio-Oil Fractions for Insertion into Petroleum Refineries

2014 ◽  
Author(s):  
Robert C. Brown ◽  
◽  
Ryan Smith ◽  
Mark Wright ◽  
Douglas Elliott ◽  
...  
Keyword(s):  
Bio Oil ◽  
Oil Fractions ◽  
Petroleum Refineries
Sign in / Sign up

Export Citation Format

Share Document