Plastic hinge length of reinforced concrete slender shear walls

2015 ◽  
Vol 67 (8) ◽  
pp. 414-429 ◽  
Author(s):  
Ju-Hyun Mun ◽  
Keun-Hyeok Yang
Keyword(s):  
Reinforced Concrete ◽  
Plastic Hinge ◽  
Shear Walls ◽  
Plastic Hinge Length

Evaluation of load–deformation behavior of reinforced concrete shear walls with continuous or lap-spliced bars in plastic hinge zone

2018 ◽  
Vol 22 (3) ◽  
pp. 722-736 ◽  
Author(s):  
Qing Zhi ◽  
Binbin Zhou ◽  
Zhangfeng Zhu ◽  
Zhengxing Guo
Keyword(s):  
Reinforced Concrete ◽  
Deformation Behavior ◽  
Plastic Hinge ◽  
Shear Walls ◽  
Analysis Procedure ◽  
Bond Slip ◽  
Lap Splices ◽  
Lap Splice ◽  
Hinge Zone ◽  
Plastic Hinge Length

This article presents an analysis procedure for evaluation of load–deformation behavior of reinforced concrete shear walls with continuous or lap-spliced bar connections in plastic hinge zones under horizontal loads. For the shear walls with continuous bars, the lateral deformations caused by flexure, shear, and reinforcement slip are evaluated by considering their interaction. The flexural deformation is calculated by conventional fiber model. The shear mechanism is based on modified compression field theory with a softened smeared cracked reinforced concrete membrane element. Both the flexural and shear deformations are estimated separately in the plastic hinge and non-plastic hinge regions. In addition, an approach is proposed for analysis of plastic hinge length based on fracture energies of materials. For the shear walls with lap-spliced bars, due to its complicated behavior and mechanism, a simple way to deal with the lap splice is proposed. The equations regarding bond-slip of the lap splice with minimum spliced length are established and the stress and strain states of lap splices with different spliced lengths are analyzed on the basis of equilibrium of forces with a mean bond stress model. Finally, the validity of the proposed analysis procedure is confirmed by comparing the analytical results with previous experimental data.

scholarly journals Numerical Modelling of Reinforced Concrete Slender Walls Subjected to Coupled Axial Tension–Flexure

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Xiaowei Cheng ◽  
Haoyou Zhang
Keyword(s):  
Reinforced Concrete ◽  
Plastic Hinge ◽  
Element Model ◽  
Lateral Loading ◽  
Design Parameters ◽  
Seismic Behaviour ◽  
High Rise ◽  
Ultimate Deformation ◽  
Axial Tension ◽  
Plastic Hinge Length

AbstractUnder strong earthquakes, reinforced concrete (RC) walls in high-rise buildings, particularly in wall piers that form part of a coupled or core wall system, may experience coupled axial tension–flexure loading. In this study, a detailed finite element model was developed in VecTor2 to provide an effective tool for the further investigation of the seismic behaviour of RC walls subjected to axial tension and cyclic lateral loading. The model was verified using experimental data from recent RC wall tests under axial tension and cyclic lateral loading, and results showed that the model can accurately capture the overall response of RC walls. Additional analyses were conducted using the developed model to investigate the effect of key design parameters on the peak strength, ultimate deformation capacity and plastic hinge length of RC walls under axial tension and cyclic lateral loading. On the basis of the analysis results, useful information were provided when designing or assessing the seismic behaviour of RC slender walls under coupled axial tension–flexure loading.

Investigation of Plastic Hinge Length in Reinforced Concrete Columns on Column Behavior

2017 ◽  
Vol 21 ◽  
pp. 45-49
Author(s):  
Mehmet Kamanli ◽  
Alptug Unal
Keyword(s):  
Reinforced Concrete ◽  
Plastic Hinge ◽  
Pushover Analysis ◽  
Concrete Columns ◽  
Analysis Program ◽  
Reinforced Concrete Buildings ◽  
Reinforced Concrete Columns ◽  
Concrete Buildings ◽  
Horizontal Stability ◽  
Plastic Hinge Length

In reinforced concrete buildings in case of a possible earthquake, the buildings slamp as they lost their horizontal stability because of hinging of column ends. The assumptions for plastic hinge lengths are present during project stage of reinforced concrete buildings. According to Turkish Earthquake Regulations, although plastic hinge length is determined to be 0.5h, it's known that plastic hinge length is determined via various formulas in some other regulations all over the world. In reinforced concrete columns, it's necessary to indicate the effect of plastic hinge length on the column behavior. For this purpose, pushover analysis of 5 column samples having different plastic hinge lengths was performed with non-linear analysis program. As a result of pushover analysis, situations of plastic hinges formed in columns and their load-displacement curves were determined. The graphs and the data were compared and the results were discussed.

Seismic force demand on ductile reinforced concrete shear walls subjected to western North American ground motions: Part 1 — parametric study

2012 ◽  
Vol 39 (7) ◽  
pp. 723-737 ◽  
Author(s):  
Yannick Boivin ◽  
Patrick Paultre
Keyword(s):  
Reinforced Concrete ◽  
Parametric Study ◽  
Plastic Hinge ◽  
Time History ◽  
Shear Walls ◽  
Beam Model ◽  
Site Class ◽  
Seismic Force ◽  
Inelastic Shear ◽  
Axial Interaction

A parametric study of regular ductile reinforced concrete (RC) cantilever walls designed with the 2010 National building code of Canada and the 2004 Canadian Standards Association (CSA) standard A23.3 for Vancouver is performed to investigate the influence of the following parameters on the higher mode amplification effects, and hence on the seismic force demand: number of storeys, fundamental lateral period (T), site class, wall aspect ratio, wall cross-section, and wall base flexural overstrength (γw). The study is based on inelastic time-history analyses performed with a multilayer beam model and a smeared membrane model accounting for inelastic shear–flexure–axial interaction. The main conclusions are that (i) T and γware the studied parameters affecting the most dynamic shear amplification and seismic force demand, (ii) the 2004 CSA standard A23.3 capacity design methods are inadequate, and (iii) a single plastic hinge design may be inadequate and unsafe for regular ductile RC walls with γw < 2.0.

Sign in / Sign up

Export Citation Format

Share Document