scholarly journals Innovative Research of Ultra-Jet Dispersion and Suspension Technologies for Processing and Modifying Liquids

2020 ◽  
pp. 068-075
Author(s):  
Kyaw Myo Htet ◽  
◽  
M.P. Glotova ◽  
A.L. Galinovsky ◽  
◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Liquid Phase ◽  
Experimental Testing ◽  
New Method ◽  
Industrial Scale ◽  
Technological Equipment ◽  
Composite Polymer ◽  
Innovative Research ◽  
Different Types ◽  
Liquid Suspensions

Currently used dispersion methods are not able to provide sufficient dispersion of nanomodifiers in liquids. This circumstance significantly reduces the effectiveness of the subsequent use of liquid-phase nanomodifiers which are widely used in the production of a variety of composite polymer and ceramic structures. The article discusses a new method of dispersing and suspending liquids using ultra-jet technology. The results of experimental testing confirming the effectiveness of ultra-jet technologies for producing liquid suspensions with nanomodifiers are presented. Two different types of powder were chosen as liquid modifiers: boehmite and carbon nanotubes. Moreover, special technological equipment was developed to conduct the experiment. The results of the analysis of the obtained liquid suspensions containing nanomodifiers allow us to recommend this dispersion technology for use on an industrial scale.

Multi-walled Carbon Nanotubes Reinforced into Hollow Fiber by Chitosan Sol-gel for Solid/Liquid Phase Microextraction of NSAIDs from Urine Prior to HPLC-DAD Analysis

2019 ◽  
Vol 20 (5) ◽  
pp. 390-400 ◽  
Author(s):  
Nabil N. AL-Hashimi ◽  
Amjad H. El-Sheikh ◽  
Rania F. Qawariq ◽  
Majed H. Shtaiwi ◽  
Rowan AlEjielat
Keyword(s):  
Carbon Nanotubes ◽  
Liquid Phase ◽  
Hollow Fiber ◽  
Sol Gel ◽  
Liquid Phase Microextraction ◽  
Extraction Device ◽  
Multi Walled Carbon Nanotubes ◽  
Solid Liquid ◽  
Walled Carbon Nanotubes

Background: The efficient analytical method for the analysis of nonsteroidal antiinflammatory drugs (NSAIDs) in a biological fluid is important for determining the toxicological aspects of such long-term used therapies. Methods: In the present work, multi-walled carbon nanotubes reinforced into a hollow fiber by chitosan sol-gel assisted-solid/ liquid phase microextraction (MWCNTs-HF-CA-SPME) method followed by the high-performance liquid chromatography-diode array detection (HPLC–DAD) was developed for the determination of three NSAIDs, ketoprofen, diclofenac, and ibuprofen in human urine samples. MWCNTs with various dimensions were characterized by various analytical techniques. The extraction device was prepared by immobilizing the MWCNTs in the pores of 2.5 cm microtube via chitosan sol-gel assisted technology while the lumen of the microtube was filled with few microliters of 1-octanol with two ends sealed. The extraction device was operated by direct immersion in the sample solution. Results: The main factors influencing the extraction efficiency of the selected NSAIDs have been examined. The method showed good linearity R2 ≥ 0.997 with RSDs from 1.1 to 12.3%. The limits of detection (LODs) were 2.633, 2.035 and 2.386 µg L-1, for ketoprofen, diclofenac, and ibuprofen, respectively. The developed method demonstrated a satisfactory result for the determination of selected drugs in patient urine samples and comparable results against reference methods. Conclusion: The method is simple, sensitive and can be considered as an alternative for clinical laboratory analysis of selected drugs.

Capturing Protein Droplets: Label-free Visualization and Detection of Protein Liquid-Liquid Phase Separation with an Aggregation-Induced Emission Fluorogen

2021 ◽  
Author(s):  
Yan-Mei Li ◽  
Chu-Qiao Liang ◽  
Lin Wang ◽  
Yun-Yi Luo ◽  
Qian-Qian Li
Keyword(s):  
Phase Separation ◽  
Liquid Phase ◽  
Liquid Phase Separation ◽  
New Method ◽  
Label Free ◽  
Simple Method ◽  
Aggregation Induced Emission ◽  
Liquid Liquid Phase Separation

We developed a new method for protein droplet visualization by means of a droplet probe (DroProbe) based on an aggregation-induced emission (AIE) fluorogen. A simple method for viscosity comparison of...

Experimental Research on Bonding Intensity of Iron Ores in the Sintering Process

2011 ◽  
Vol 391-392 ◽  
pp. 60-64
Author(s):  
Fang Yi Long ◽  
Sheng Li Wu ◽  
Juan Zhu ◽  
Yuan Du ◽  
Guo Liang Zhang
Keyword(s):  
South Africa ◽  
Liquid Phase ◽  
Experimental Research ◽  
Negative Correlation ◽  
Influence Factors ◽  
Iron Ores ◽  
Sintering Process ◽  
Different Types ◽  
Lower Porosity

The bonding intensity of four kinds of ores from Brazil, Australia and South Africa is researched in this study, and the influence factors are analyzed. The results show that, the ores of different types have apparently differences in bonding intensity, ores from Brazil and South Africa have high bonding intensity, while ores from Australia have low bonding intensity; The foundation of generation of effective liquid is adequate liquid phase fluidity and the lower porosity of core ore; The ratio of porosity of core ore and the index of liquid phase fluidity has negative correlation with the bonding intensity.

Performance assessment of the complex repairable system with n-identical units under (k-out-of-n: G) scheme and copula linguistic repair approach

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
V. V. Singh ◽  
Abubakkar Idris Mohhammad ◽  
Kabiru Hamisu Ibrahim ◽  
Ibrahim Yusuf
Keyword(s):  
Complex System ◽  
Design Methodology ◽  
New Method ◽  
Social Implications ◽  
Repairable System ◽  
Variable Technique ◽  
Content Type ◽  
Different Types ◽  
Theoretical Assessment ◽  
Practical Implications

PurposeThis paper analyzed a complex system consisting n-identical units under a k-out-of-n: G; configuration via a new method which has not been studied by previous researchers. The computed results are more supportable for repairable system performability analysis.Design/methodology/approachIn this paper, the authors have analyzed a complex system consisting n-identical units under a k-out-of-n: G; configuration via a new method which has not been studied by previous researchers. The supplementary variable technique has employed for analyzing the performance of the system.FindingsReliability measures have been computed for different types of configuration. It generalized the results for purely series and purely parallel configurations.Research limitations/implicationsThis research may be beneficial for industrial system performances whereas a k-out-of-n-type configuration exists.Practical implicationsNot sure as it is a theoretical assessment.Social implicationsThis research may not have social implications.Originality/valueThis work is the sole work of authors that have not been communicated to any other journal before.

Sign in / Sign up

Export Citation Format

Share Document