scholarly journals Machine Learning Approach to Analyse Ensemble Models and Neural Network Model for E-Commerce Application

2020 ◽  
Vol 13 (28) ◽  
pp. 2849-2857
Author(s):  
P Kalaivani ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 969
Author(s):  
Ka Lok Chan ◽  
Ehsan Khorsandi ◽  
Song Liu ◽  
Frank Baier ◽  
Pieter Valks

In this paper, we present the estimation of surface NO2 concentrations over Germany using a machine learning approach. TROPOMI satellite observations of tropospheric NO2 vertical column densities (VCDs) and several meteorological parameters are used to train the neural network model for the prediction of surface NO2 concentrations. The neural network model is validated against ground-based in situ air quality monitoring network measurements and regional chemical transport model (CTM) simulations. Neural network estimation of surface NO2 concentrations show good agreement with in situ monitor data with Pearson correlation coefficient (R) of 0.80. The results also show that the machine learning approach is performing better than regional CTM simulations in predicting surface NO2 concentrations. We also performed a sensitivity analysis for each input parameter of the neural network model. The validated neural network model is then used to estimate surface NO2 concentrations over Germany from 2018 to 2020. Estimated surface NO2 concentrations are used to investigate the spatio-temporal characteristics, such as seasonal and weekly variations of NO2 in Germany. The estimated surface NO2 concentrations provide comprehensive information of NO2 spatial distribution which is very useful for exposure estimation. We estimated the annual average NO2 exposure for 2018, 2019 and 2020 is 15.53, 15.24 and 13.27 µµg/m3, respectively. While the annual average NO2 concentration of 2018, 2019 and 2020 is only 12.79, 12.60 and 11.15 µµg/m3. In addition, we used the surface NO2 data set to investigate the impacts of the coronavirus disease 2019 (COVID-19) pandemic on ambient NO2 levels in Germany. In general, 10–30% lower surface NO2 concentrations are observed in 2020 compared to 2018 and 2019, indicating the significant impacts of a series of restriction measures to reduce the spread of the virus.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Idris Kharroubi ◽  
Thomas Lim ◽  
Xavier Warin

AbstractWe study the approximation of backward stochastic differential equations (BSDEs for short) with a constraint on the gains process. We first discretize the constraint by applying a so-called facelift operator at times of a grid. We show that this discretely constrained BSDE converges to the continuously constrained one as the mesh grid converges to zero. We then focus on the approximation of the discretely constrained BSDE. For that we adopt a machine learning approach. We show that the facelift can be approximated by an optimization problem over a class of neural networks under constraints on the neural network and its derivative. We then derive an algorithm converging to the discretely constrained BSDE as the number of neurons goes to infinity. We end by numerical experiments.


2020 ◽  
Vol 8 (10) ◽  
pp. 766
Author(s):  
Dohan Oh ◽  
Julia Race ◽  
Selda Oterkus ◽  
Bonguk Koo

Mechanical damage is recognized as a problem that reduces the performance of oil and gas pipelines and has been the subject of continuous research. The artificial neural network in the spotlight recently is expected to be another solution to solve the problems relating to the pipelines. The deep neural network, which is on the basis of artificial neural network algorithm and is a method amongst various machine learning methods, is applied in this study. The applicability of machine learning techniques such as deep neural network for the prediction of burst pressure has been investigated for dented API 5L X-grade pipelines. To this end, supervised learning is employed, and the deep neural network model has four layers with three hidden layers, and the neural network uses the fully connected layer. The burst pressure computed by deep neural network model has been compared with the results of finite element analysis based parametric study, and the burst pressure calculated by the experimental results. According to the comparison results, it showed good agreement. Therefore, it is concluded that deep neural networks can be another solution for predicting the burst pressure of API 5L X-grade dented pipelines.


2021 ◽  
Vol 72 (1) ◽  
pp. 11-20
Author(s):  
Mingtao He ◽  
Wenying Li ◽  
Brian K. Via ◽  
Yaoqi Zhang

Abstract Firms engaged in producing, processing, marketing, or using lumber and lumber products always invest in futures markets to reduce the risk of lumber price volatility. The accurate prediction of real-time prices can help companies and investors hedge risks and make correct market decisions. This paper explores whether Internet browsing habits can accurately nowcast the lumber futures price. The predictors are Google Trends index data related to lumber prices. This study offers a fresh perspective on nowcasting the lumber price accurately. The novel outlook of employing both machine learning and deep learning methods shows that despite the high predictive power of both the methods, on average, deep learning models can better capture trends and provide more accurate predictions than machine learning models. The artificial neural network model is the most competitive, followed by the recurrent neural network model.


Mathematics ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 890 ◽  
Author(s):  
Zhihao Zhang ◽  
Zhe Wu ◽  
David Rincon ◽  
Panagiotis Christofides

Machine learning has attracted extensive interest in the process engineering field, due to the capability of modeling complex nonlinear process behavior. This work presents a method for combining neural network models with first-principles models in real-time optimization (RTO) and model predictive control (MPC) and demonstrates the application to two chemical process examples. First, the proposed methodology that integrates a neural network model and a first-principles model in the optimization problems of RTO and MPC is discussed. Then, two chemical process examples are presented. In the first example, a continuous stirred tank reactor (CSTR) with a reversible exothermic reaction is studied. A feed-forward neural network model is used to approximate the nonlinear reaction rate and is combined with a first-principles model in RTO and MPC. An RTO is designed to find the optimal reactor operating condition balancing energy cost and reactant conversion, and an MPC is designed to drive the process to the optimal operating condition. A variation in energy price is introduced to demonstrate that the developed RTO scheme is able to minimize operation cost and yields a closed-loop performance that is very close to the one attained by RTO/MPC using the first-principles model. In the second example, a distillation column is used to demonstrate an industrial application of the use of machine learning to model nonlinearities in RTO. A feed-forward neural network is first built to obtain the phase equilibrium properties and then combined with a first-principles model in RTO, which is designed to maximize the operation profit and calculate optimal set-points for the controllers. A variation in feed concentration is introduced to demonstrate that the developed RTO scheme can increase operation profit for all considered conditions.


2020 ◽  
Vol 34 (02) ◽  
pp. 1693-1700 ◽  
Author(s):  
Angela Fan ◽  
Jack Urbanek ◽  
Pratik Ringshia ◽  
Emily Dinan ◽  
Emma Qian ◽  
...  

Procedurally generating cohesive and interesting game environments is challenging and time-consuming. In order for the relationships between the game elements to be natural, common-sense has to be encoded into arrangement of the elements. In this work, we investigate a machine learning approach for world creation using content from the multi-player text adventure game environment LIGHT (Urbanek et al. 2019). We introduce neural network based models to compositionally arrange locations, characters, and objects into a coherent whole. In addition to creating worlds based on existing elements, our models can generate new game content. Humans can also leverage our models to interactively aid in worldbuilding. We show that the game environments created with our approach are cohesive, diverse, and preferred by human evaluators compared to other machine learning based world construction algorithms.


2018 ◽  
Author(s):  
Alan Rozet ◽  
Ian M Kronish ◽  
Joseph E Schwartz ◽  
Karina W Davidson

BACKGROUND Investigations into person-specific predictors of stress have typically taken either a population-level nomothetic approach or an individualized ideographic approach. Nomothetic approaches can quickly identify predictors but can be hindered by the heterogeneity of these predictors across individuals and time. Ideographic approaches may result in more predictive models at the individual level but require a longer period of data collection to identify robust predictors. OBJECTIVE Our objectives were to compare predictors of stress identified through nomothetic and ideographic models and to assess whether sequentially combining nomothetic and ideographic models could yield more accurate and actionable predictions of stress than relying on either model. At the same time, we sought to maintain the interpretability necessary to retrieve individual predictors of stress despite using nomothetic models. METHODS Data collected in a 1-year observational study of 79 participants performing low levels of exercise were used. Physical activity was continuously and objectively monitored by actigraphy. Perceived stress was recorded by participants via daily ecological momentary assessments on a mobile app. Environmental variables including daylight time, temperature, and precipitation were retrieved from the public archives. Using these environmental, actigraphy, and mobile assessment data, we built machine learning models to predict individual stress ratings using linear, decision tree, and neural network techniques employing nomothetic and ideographic approaches. The accuracy of the approaches for predicting individual stress ratings was compared based on classification errors. RESULTS Across the group of patients, an individual’s recent history of stress ratings was most heavily weighted in predicting a future stress rating in the nomothetic recurrent neural network model, whereas environmental factors such as temperature and daylight, as well as duration and frequency of bouts of exercise, were more heavily weighted in the ideographic models. The nomothetic recurrent neural network model was the highest performing nomothetic model and yielded 72% accuracy for an 80%/20% train/test split. Using the same 80/20 split, the ideographic models yielded 75% accuracy. However, restricting ideographic models to participants with more than 50 valid days in the training set, with the same 80/20 split, yielded 85% accuracy. CONCLUSIONS We conclude that for some applications, nomothetic models may be useful for yielding higher initial performance while still surfacing personalized predictors of stress, before switching to ideographic models upon sufficient data collection.


Sign in / Sign up

Export Citation Format

Share Document