scholarly journals Feasibility Study on Hybrid Solar Photovoltaic with Diesel Generator and Battery Storage Design and Sizing Using HOMER Pro®

2018 ◽  
Vol SI1 (3) ◽  
pp. 69-76
Author(s):  
Amanda Halim ◽  
◽  
Ahmad Fudholi ◽  
Kamaruzzaman Sopian ◽  
Mohd Hafidz Ruslan ◽  
...  
Author(s):  
Abid Ali ◽  
Nursyarizal Mohd Nor ◽  
Taib Ibrahim ◽  
Mohd Fakhizan Romlie ◽  
Kishore Bingi

This chapter proposes a mixed-integer optimization using genetic algorithm (MIOGA) for determining the optimum sizes and placements of battery-sourced solar photovoltaic (B-SSPV) plants to reduce the total energy losses in distribution networks. Total energy loss index (TELI) is formulated as the main objective function and meanwhile bus voltage deviations and PV penetrations of B-SSPV plants are calculated. To deal the stochastic behavior of solar irradiance, 15 years of weather data is modeled by using beta probability density function (Beta-PDF). The proposed algorithm is applied on IEEE 33 bus and IEEE 69 bus test distribution networks and optimum results are acquired for different time varying voltage dependent load models. From the results, it is known that, compared to PV only, the integration of B-SSPV plants in the distribution networks resulted in higher penetration levels in distribution networks. The proposed algorithm was very effective in terms of determining the sizes of the PV plant and the battery storage, and for the charging and discharging of the battery storage.


2017 ◽  
Vol 6 (3) ◽  
pp. 263
Author(s):  
Chouaib Ammari

In this paper, we will size an optimum hybrid central content three different generators, two on renewable energy (solar photovoltaic and wind power) and two nonrenewable (diesel generator and storage system) because the new central generator has started to consider the green power technology in order for best future to the world, this central will use all the green power resource available and distributes energy to a small isolated village in southwest of Algeria named “Timiaouine”. The consumption of this village estimated with detailed in two season; season low consumption (winter) and high consumption (summer), the hybrid central will be optimized by program Hybrid Optimization Model for Electric Renewable (HOMER PRO), this program will simulate in two configuration, the first with storage system, the second without storage system and in the end the program HOMER PRO will choose the best configuration which is the mixture of both economic and ecologic configurations, this central warrants the energetic continuity of village.Article History: Received May 18th 2017; Received in revised form July 17th 2017; Accepted Sept 3rd 2017; Available onlineHow to Cite This Article: Ammari, C., Hamouda,M., and Makhloufi,S. (2017) Sizing and Optimization for Hybrid Central in South Algeria Based on Three Different Generators. International Journal of Renewable Energy Development, 6(3), 263-272.http://doi.org/10.14710/ijred.6.3.263-272


2020 ◽  
Vol 181 ◽  
pp. 03005 ◽  
Author(s):  
Alberto Boretti ◽  
Stefania Castelletto ◽  
Wael Al-Kouz ◽  
Jamal Nayfeh

In a recent publication, North European experts argue that “Saudi Arabia can achieve a 100% renewable energy power system by 2040 with a power sector dominated by PV single-axis tracking and battery storage”. They also say “Battery storage contributed up to 30% of the total electricity demand in 2040 and the contribution increases to 48% by 2050”. Based on considerations specific to the geography, climate conditions, and resources of Saudi Arabia, it is explained as batteries and photovoltaic solar panels are not the best choice for the country's energy sector. To cover all the total primary energy supply of Saudi Arabia by solar photovoltaic, plus battery storage to compensate for the sun's energy intermittency, unpredictability, and seasonal variability, is impracticable and inconvenient, for both the economy and the environment. Better environment and economy may be achieved by further valorizing the fossil fuel resources, through the construction of other high-efficiency plants such as the combined cycle gas turbine plants of Qurayyah, development of novel technologies for the production of clean fuels and clean electricity, including oxyfuel combustion and carbon capture and storage. Construction of nuclear power plants may also be more beneficial to the economy and the environment than photovoltaic and batteries. Regarding solar energy, enclosed trough solar thermal power systems developed along the coast have much better perspectives than solar photovoltaic, as embedded thermal energy storage is a better approach than battery storage. Further, a centralized power plant works better than distributed rooftop photovoltaic installations covered by dust and sand, rusted or cracked. Finally, pumped hydro energy storage along the coast may also have better perspectives than battery storage.


Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4820 ◽  
Author(s):  
Moiz Masood Syed ◽  
Gregory M. Morrison ◽  
James Darbyshire

More than 2 million houses in Australia have installed solar photovoltaic (PV) systems; however, apartment buildings have adopted a low percentage of solar PV and battery storage installations. Given that grid usage reduction through PV and battery storage is a primary objective in most residential buildings, apartments have not yet fully benefited from installations of such systems. This research presents shared microgrid configurations for three apartment buildings with PV and battery storage and evaluates the reduction in grid electricity usage by analyzing self-sufficiency. The results reveal that the three studied sites at White Gum Valley achieved an overall self-sufficiency of more than 60%. Owing to the infancy of the shared solar and battery storage market for apartment complexes and lack of available data, this study fills the research gap by presenting preliminary quantitative findings from implementation in apartment buildings.


2016 ◽  
Vol 839 ◽  
pp. 130-135
Author(s):  
Ivan Tendo ◽  
Chatchai Sirisamphanwong

In this research paper, an illustration for system size optimization for a stand-alone PV – diesel hybrid system is obtained. The requirement is to obtain an optimal size that can meet energy demand at an optimized cost for a given lifetime period of the project, this will be achieved using HOMER software to further improve the system parameters like performance ratio, renewable energy fraction, MATLAB will be used. This research study will be done basing on a system currently installed at the School of Renewable Energy, Naresuan University (SERT), this system has a capacity of 120 kW, and it is a hybrid system with PV array, Diesel generator and battery storage system. The cost parameters that will be addressed are; - Net present cost (NPC), Cost of Energy (COE), Capital cost (CC). The initial size of the hybrid system is PV-120kW, Diesel generator -100kW and battery storage of 200kWh after modelling and simulation with HOMER software using special models to show the predicted performance of the final outcome, the optimal size created has a PV size of 100kW, diesel generator with a size of 100kW and battery storage of 100kWh and compared to the initial system COE od 1.01$/kWh, the optimal size has a COE of 0.934$/kWh.


Sign in / Sign up

Export Citation Format

Share Document