The effect of caries detector dyes and a cavity cleansing agent on composite resin bonding to enamel and dentin

2001 ◽  
Vol 25 (1) ◽  
pp. 57-63 ◽  
Author(s):  
Azza El-Housseiny ◽  
Hana Jamjoum
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Group Iv ◽  
Acid Etching ◽  
Group V ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

This study was undertaken to evaluate the effect of caries detector dyes and/or cavity cleanser on composite bonding and etching patterns of enamel and dentin. One hundred and eight non-carious premolars were divided into six groups according to the enamel and dentin pretreatment investigated. The different pretreatment were as follows: Group I: teeth with prophylaxis only, Group II: Sable seek caries detector dye,Groups III: chlorhexidine cavity cleanser,Group IV: the caries detectors dye followed by prophylaxis, Group V: the cavity cleanser followed by the caries detector dye, and Group IV: Snoop caries detector dye. The shear bond strength of composite resin bonded to enamel and dentin was evaluated by the Instron Universal testing machine while, the topographic details of enamel and dentin were examined by the SEM following the different pretreatment and acid etching. Results of the shear bond strength showed no statistically significant difference among the six groups, with no substantial differences in SEM results. It is concluded that using the caries detector dyes and/or chlorhexidine cavity cleanser before acid etching does not significantly affect composite bonding to enamel and dentin.

scholarly journals Pengaruh bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit

2017 ◽  
Vol 2 (1) ◽  
pp. 35
Author(s):  
Ema Mulyawati
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Artificial Saliva ◽  
Testing Machine ◽  
Group Iii ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

The Effect of desensitizing agent in post-extracoronal bleaching on shear bond strength of composite resin. The dentinal hypersensitivity is a common condition among patients after extracoronal bleaching treatment that usually needs the application of desensitizing agent. The purpose of this study was to evaluate the composite resin restoration shear bond strength with and without desensitizing application after extracoronal bleaching using 40% of H2O2. Twenty one extracted permanent human incisor teeth were randomly divided into 3 groups of 7 each. Group I was with the application of 40% H2O2 without any desensitizing agent. Group II was with the application of 40% of H2O2 with desensitizing agent and group III served as the control. The teeth were immersed in artificial saliva and stored in 37 °C incubator for 7 days. The teeth were restored using composite resin. After restoring the shear bond strength of composite resin was tested using a universal testing machine. Result and conclusion. there is no significant difference between bleaching group with and without desensitizing agent. The application of desensitizing agent after extracoronal bleaching did not impact the composite resin shear bond strength.ABSTRAKDentin hipersensitif merupakan kondisi yang biasa dialami pasien setelah perawatan bleaching ekstrakoronal yang biasanya memerlukan aplikasi bahan desensitasi. Penelitian ini bertujuan untuk mengetahui pengaruh bahan desensitasi pasca bleaching ekstrakoronal menggunakan H2O2 40% terhadap kekutan geser pelekatan restorasi resin komposit. Dua puluh satu gigi permanen insisivus yang telah dicabut dibagi dalam tiga kelompok masing-masing 7 gigi. Kelompok I dilakukan bleaching ekstrakoronal dengan H2O2 tanpa bahan desensitasi. Kelompok II dilakukan bleaching setelah itu diaplikasikan bahan desensitasi dan kelompok III sebagai kelompok kontrol. Semua gigi-gigi tersebut di rendam dalam saliva buatan dan dimasukkan inkubator selama 7 hari pada suhu 37 °C. Selanjutnya seluruh gigi dilakukan restorasi resin komposit menggunakan light cure halogen. Setelah itu dilakukan pengujian kekuatan geser pelekatan menggunakan universal testing machine. Data dianalisis menggunakan uji Kruskal - Wallis. Hasil penelitian menunjukkan bahwa tidak ada perbedaan kekuatan geser pelekatan pada semua kelompok perlakuan (p > 0,05). Dari penelitian ini disimpulkan bahwa tidak terdapat pengaruh aplikasi bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit.

scholarly journals Shear bond strength of bulk-fill and nano-restorative materials to dentin

2016 ◽  
Vol 10 (01) ◽  
pp. 040-045 ◽  
Author(s):  
Hakan Colak ◽  
Ertugrul Ercan ◽  
Mehmet Mustafa Hamidi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Clinical Success ◽  
Testing Machine ◽  
Group Iv ◽  
Composite Resins ◽  
Group Iii ◽  
Bonding System ◽  
Group I ◽  
Significant Difference

ABSTRACT Objectives: Bulk-fill composite materials are being developed for preparation depths of up to 4 mm in an effort to simplify and improve the placement of direct composite posterior restorations. The aim of our study was to compare shear-bond strength of bulk-fill and conventional posterior composite resins. Materials and Methods: In this study, 60 caries free extracted human molars were used and sectioned parallel to occlusal surface to expose midcoronal dentin. The specimens were randomly divided into four groups. Total-etch dentine bonding system (Adper Scotchbond 1XT, 3M ESPE) was applied to dentin surface in all the groups to reduce variability in results. Then, dentine surfaces covered by following materials. Group I: SonicFill Bulk-Fill, Group II: Tetric EvoCeram (TBF), Group III: Herculite XRV Ultra, and Group IV: TBF Bulk-Fill, 2 mm × 3 mm cylindrical restorations were prepared by using application apparatus. Shear bond testing was measured by using a universal testing machine. Kruskal–Wallis and Mann–Whitney U-tests were performed to evaluate the data. Results: The highest value was observed in Group III (14.42 ± 4.34) and the lowest value was observed in Group IV (11.16 ± 2.76) and there is a statistically significant difference between these groups (P = 0.046). However, there is no statistically significant difference between the values of other groups. In this study, Group III was showed higher strength values. Conclusion: There is a need for future studies about long-term bond strength and clinical success of these adhesive and bulk-fill systems.

scholarly journals Microshear bond strength evaluation of surface pretreated zirconia ceramics bonded to dentin

2015 ◽  
Vol 09 (02) ◽  
pp. 224-227 ◽  
Author(s):  
Shenbagakuttalam Anand ◽  
Ambrose Vedamanickam Rajesh Ebenezar ◽  
Nirupa Anand ◽  
Kothandaraman Rajkumar ◽  
Sekar Mahalaxmi ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Group Iv ◽  
Zirconia Ceramics ◽  
Group V ◽  
Statistical Significant Difference ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Group Ii

ABSTRACT Objectives: To comparatively assess the micro shear bond strength (MSBS) of dentin bonded surface pre-treated zirconia ceramics. Materials and Methods: Zirconia blocks were sectioned into 50 cubical blocks. The blocks were further categorized into five groups (n = 10 each). Group I: No treatment was performed on zirconia samples; Group II: The zirconia samples were sand-blasted; Group III: Group II + etched with 9.8% of hydrofluoric (HF) acid for 60 s; Group IV: The sandblasted zirconia samples were selectively infiltrated with low fusing porcelain; and Group V: Group IV + etched using 9.8% HF acid gel. The zirconia specimens were then bonded to dentin samples, and the samples were tested for MSBS evaluation using universal testing machine. Results: The MSBS of all the four experimental groups shows greater value than group I. Among the experimental groups, group V and group IV do not show any statistical significant difference, whereas the mean MSBS of groups IV and V were statistically greater than group III and group II. However, groups I, II, and III do not show any statistical significant difference in mean MSBS values between them. Conclusion: Selective infiltration etching of zirconia ceramics provides the highest bond strength with resin cement.

Resistência de união ao cisalhamento entre a resina composta e dentes artificiais de resina acrílica

2021 ◽  
Vol 10 (40) ◽  
pp. 33-37
Author(s):  
Joyce de Figueiredo Meira Barbosa ◽  
Lara Pepita de Souza Oliveira ◽  
Marcelo Nascimento Bruce ◽  
Jonas Alves Oliveira ◽  
Ligia Regina Mota Vasconcelos ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Acrylic Resin ◽  
Single Bond ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Artificial Teeth

Acrylic denture teeth may suffer fracture or wear requiring the need for repair. This study aimed to evaluate the shear bond strength between acrylic resin artificial teeth restored with composite resin (with two different surface treatments) and acrylic resin (AR), simulating repair with these materials. Thirty artificial incisors were included by the palatal side in a circular microwave-polymerized AR base and polished on their buccal side with 120 and 320 grit sandpaper in a metallographic polisher and, then, divided into three groups: (I) restoration with self-cured AR; (II) conventional restoration with Z-100 composite resin with application of acid etching and Single Bond-3M adhesive; and (III) restoration with Z-100 composite resin with submersion for 30 seconds in acetone and application of Single Bond-3M adhesive. Shear bond strength tests were performed in a Universal Testing Machine (Instron). The results were submitted to ANOVA and Tukey (p<0.05) tests, in which Group I (33.26MPa ±10.76) and Group III (22.24MPa ±13.13) showed no statistically significant difference, but both were superior to Group II (10.31MPa ±5.62), which showed a lower value of shear bond strength. It can be concluded that composite resin restoration with acetone pretreatment can be a viable alternative for repair.

scholarly journals Shear Bond Strength of Orthodontic Brackets Cured with Different Light Sources under Thermocycling

2010 ◽  
Vol 04 (03) ◽  
pp. 257-262 ◽  
Author(s):  
Oral Sokucu ◽  
Seyda Herguner Siso ◽  
Firat Ozturk ◽  
Ruhi Nalcaci
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Group Iv ◽  
Light Sources ◽  
Group Vi ◽  
Group V ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Light Curing

Objectives: The aim of this study was to compare the shear bond strength (SBS) of two different light sources under different thermal cycle frequencies.Methods: Ninety human premolar teeth were divided into six groups, in which three groups consisted of halogen groups – Group I was cured with halogen without thermocycle, Group II cured with halogen with 500 thermocycles, and Group III cured with halogen with 10,000 thermocycles. The other three groups consisted of Plasma arc (PAC) group – Group IV was cured with PAC without thermocycle, Group V cured with PAC thermocycled 500 cycles, and Group VI cured with PAC thermocycled 10,000 cycles. Two way ANOVA was used to compare the SBS between the groups, and chi squaretest was used to compare the bond failure of ARI scores among the groups.Results: A significant difference was found for curing lights (P<.001) and thermocycling (P<.01). However, there was no interaction between light curing and thermocycling (P=.177). The halogen groups demonstrated higher mean SBS than the PAC groups. Both groups showed a significant reduction between no cycles and 10,000 cycles (P<.05).Conclusions: Both light sources showed favorable SBS performance without the thermocycle procedure. Thermocycling significantly decreased the SBS values of both groups. (Eur J Dent 2010;4:257- 262)

scholarly journals Comparative Evaluation of Immediate Bond Strength to Bleached Enamel Following Application of Various Antioxidant Solutions

2017 ◽  
Vol 05 (02) ◽  
pp. 084-089
Author(s):  
Alisha Dhingra ◽  
Ashu Gupta ◽  
Anshu Minocha ◽  
Nayantara Sen
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Grape Seed Extract ◽  
Grape Seed ◽  
Seed Extract ◽  
The Other ◽  
Sodium Ascorbate ◽  
Group V ◽  
Group I ◽  
Significant Difference

Abstract Aim: The aim of this study was to compare the reversal of shear bond strength of composite to bleached enamel immediately after bleaching followed by application of various antioxidant solutions. Material and Methods: Seventy central incisors were divided into seven groups. Groups I and II served as unbleached and bleached controls respectively. Groups III, IV, V, VI and VII served as the experimental groups and were subjected to 37.5% hydrogen peroxide bleaching followed by 10 min application of 10% sodium ascorbate, 25% alpha-tocopherol, 6.5% grape seed extract, 5% lycopene and 5% green tea extract respectively. Following composite bonding, shear bond strength was determined and the results were analyzed using ANOVA followed by Post Hoc Multiple Comparisons test. Results: The bond strength values for Group I (positive control) were maximum and significantly different than all the other groups except Grape seed extract group (Group V). When compared to Group II (bleached control), all the groups showed significantly higher bond strength. Significant difference in the bond strength values were seen between Group III (10% sodium ascorbate) and Group V. Also values for Group V were significantly different from Group VI (5% lycopene). All the other values showed insignificantly different results. Conclusion: All the antioxidant solutions improved the shear bond strength values after bleaching but only Grape seed extract application reversed the values to the non bleached levels. Lycopene was least effective. Other antioxidants showed comparable results.

scholarly journals Comparative evaluation of superoxide dismutase, alpha-tocopherol, and 10% sodium ascorbate on reversal of shear bond strength of bleached enamel: An in vitro study

2016 ◽  
Vol 10 (01) ◽  
pp. 109-115 ◽  
Author(s):  
Mahendran Kavitha ◽  
Sharmila Selvaraj ◽  
Ambica Khetarpal ◽  
Aruna Raj ◽  
Shakunthala Pasupathy ◽  
...  
Keyword(s):  
Superoxide Dismutase ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Alpha Tocopherol ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Group I ◽  
Antioxidant Agents ◽  
Significant Difference

ABSTRACT Objective: The aim of this study was to investigate the neutralizer effect of antioxidant agents on the bond strength of bleached enamel. Materials and Methods: Sixty enamel slabs were prepared from 60 freshly extracted maxillary central incisors and were divided into six groups. The negative control group received no bleaching treatment and the other groups were bleached with 35% carbamide peroxide (Opalescence Quick; Ultradent, South Jordan, USA). In Group II, composite was built immediately after bleaching and cured without any antioxidants. In Group III, bleached specimens received composite build ups delayed by 1 week. In Groups IV, V, and VI bleached specimens received applications of superoxide dismutase (SOD), sodium ascorbate (SA), and tocopherol solutions, respectively, for 10 min. Following composite bonding, the micro shear bond strength (μSBS) was measured at a speed of 1 mm/min in universal testing machine. Statistical Analysis Used: The μSBS values of all the groups were analyzed using the analysis of variance followed by Tukey honestly significant difference post-hoc test. Results: Bonding of composites to unbleached group (Group I) exhibited the highest mean SBS values and among the antioxidant-treated groups, the highest SBS values were seen with SOD (Group IV) treated samples (23.0040 ± 4.30565 MPa). Conclusions: Application of SA, alpha-tocopherol, and SOD can effectively reverse the bond strength with bleached enamel. SOD gave a comparatively more promising reversal of bond strength than SA and alpha-tocopherol, and deserves further studies.

scholarly journals Aplikasi klorheksidin glukonat 2%pada dentin tidak mempengaruhi kuat rekat geserkomposit resinyangmenggunakansistem adesif self etch (2% Chlorhexidine gluconate application on dentine does not affect bond strength of resin composite using self etch adhesive system)

2014 ◽  
Vol 13 (1) ◽  
pp. 7
Author(s):  
Dewi Puspitasari ◽  
Andi Soufyan ◽  
Ellyza Herda
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Resin Composite ◽  
Testing Machine ◽  
Adhesive System ◽  
Chlorhexidine Gluconate ◽  
Adhesive Systems ◽  
Group I ◽  
Self Etch

Composite resin is a widely used aesthetic restoration. The restoration can fail due to secondary caries. Chlorhexidinegluconate 2% is used as a cavity disinfectant to eliminate microorganisms on the prepared cavity and to prevent thesecondary caries. The purpose of this study was to analyze the effect of chlorhexidine gluconate 2% to the bondstrength of composite resin with self etch system adhesive on dentine. Sixteen specimens of buccal dentine of premolarscrown are divided into 2 different groups. Group I: Clearfil SE Bond self-etch primer was applied for 20 seconds,Clearfil SE Bond bonding was applied for 5 seconds and polymerized for 10 seconds. Composite resin was constructedincrementally and polymerized for 20 seconds. Group II: prior to self etch primer application as in group I,chlorhexidine gluconate 2% was applied for 15 seconds. Shear bond strength was tested using Testing machine andanalyzed with unpaired T test. The highest shear bond strength was obtained by applying chlorhexidine gluconate 2%.The study concludes that chlorhexidine gluconate 2% application to dentine did not affect significantly to the bondstrength composite resin using self etch adhesive systems.

scholarly journals Comparison of the Shear bonding Strength of ION-Z GIC to a Resin Composite Using Different Adhesive Systems: RCT Study

2020 ◽  
Author(s):  
Sana Lala ◽  
Thuraya Lazkani
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Self Etch ◽  
Shear Bonding Strength

Abstract Background:In restorative dentistry we usually use Sandwich Technique for posterior restorations where GIC is placed below and a resin composite is placed over it. The bonding strength between these two materials are low. We are looking for the best adhesive system to put it in between. We think that the self-etching bond will give the best bonding strength between them whereas total etch will give lower bonding strength than self-etching system. Methods:ION-Z GIC was bonded to resin composite by using two different bonding agents. The thirty specimens used were prepared by using acrylic blocks with holes in each hole to retain the ION-Z GIC. The specimens were randomly divided into three groups:Group I: Control group.Group II: Total-etch adhesive was applied and cured over ION-Z GIC.Group III: Self-etch adhesive was applied and cured.The composite resin placed over the ION-Z GIC and cured. The shear bond strength was measured by shearing of the bonded specimens on Universal Testing Machine (Model 114) using speed of 0.1mm / minute. The reading was tabulated and subjected to statistical analysis using ANOVA and Tukey's test.Results:The test showed statistically significant difference between Group III and Group I and between Group III and Group II. Group III had the highest shear bonding strength.Conclusion:Self-etch adhesive agent produces have better shear bond strength to ION-Z than total-etch adhesive and to the group without any bonding agent.

scholarly journals Impact of Various Cross Linking Agents on Dentin Adhesive Systems - an In-vitro Study

2021 ◽  
pp. 86-92
Author(s):  
Ganapathi Vasavi Prasanna ◽  
Vemareddy Rajasekhar ◽  
Someshwar Battu ◽  
Korrai Balaraju ◽  
Seera Sudhakar Naidu ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Group Iv ◽  
Bonding Agent ◽  
Sodium Ascorbate ◽  
Cross Linking ◽  
Group Iii ◽  
Group I ◽  
Self Etch

Aims and Objectives: The main aim of this study is to compare and evaluate the shear bond strength of composite resin using a total etch adhesive and self-etch adhesive after treatment with different collagen cross-linking agents. Materials and Methods: Forty freshly extracted human maxillary central incisors were taken. The proximal dentin was exposed, cavities were prepared on mesial and distal of each tooth. The specimens were randomly divided into two groups based on bonding agent applied-Group A and Group B i.e universal bonding agent and all in one bonding agent respectively and are subdivided into four groups based on the surface treatment of dentin. Group I A (n=10) Control-total etch(CTE); Group II A (n=10) Sodium Ascorbate-total etch (STE); Group III A (n=10)- Proanthocyanidin total etch(PTE); Group IV A (n=10)- Chitosan total etch (CHTE); Group I B (n=10) Control-self etch (CSE); Group II B (n=10) Sodium Ascorbate-self etch(SSE); Group III B (n=10)- Proanthocyanidin self-etch (PSE); and Group IV B (n=10) - Chitosan self-etch (CHSE). Shear bond strength of the specimens are tested with universal testing machine, and the data was statistically analysed with one way ANOVA. Results: Significantly higher shear bond strength to dentin was observed in teeth treated with 6.5% Proanthocyanidin Total etch, 10% Sodium Ascorbate Total etch and 1% Chitosan acetate compared to the control group. No significant difference was seen with self-etch treated groups. Conclusion: Dentin surface pretreatment with 6.5% Proanthocyanidin, 10% Sodium Ascorbate and 1% Chitosan acetate results in significant enhancement in bond strength of composite resin to deep dentin.

Sign in / Sign up

Export Citation Format

Share Document