scholarly journals Pengaruh bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit

2017 ◽  
Vol 2 (1) ◽  
pp. 35
Author(s):  
Ema Mulyawati
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Artificial Saliva ◽  
Testing Machine ◽  
Group Iii ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

The Effect of desensitizing agent in post-extracoronal bleaching on shear bond strength of composite resin. The dentinal hypersensitivity is a common condition among patients after extracoronal bleaching treatment that usually needs the application of desensitizing agent. The purpose of this study was to evaluate the composite resin restoration shear bond strength with and without desensitizing application after extracoronal bleaching using 40% of H2O2. Twenty one extracted permanent human incisor teeth were randomly divided into 3 groups of 7 each. Group I was with the application of 40% H2O2 without any desensitizing agent. Group II was with the application of 40% of H2O2 with desensitizing agent and group III served as the control. The teeth were immersed in artificial saliva and stored in 37 °C incubator for 7 days. The teeth were restored using composite resin. After restoring the shear bond strength of composite resin was tested using a universal testing machine. Result and conclusion. there is no significant difference between bleaching group with and without desensitizing agent. The application of desensitizing agent after extracoronal bleaching did not impact the composite resin shear bond strength.ABSTRAKDentin hipersensitif merupakan kondisi yang biasa dialami pasien setelah perawatan bleaching ekstrakoronal yang biasanya memerlukan aplikasi bahan desensitasi. Penelitian ini bertujuan untuk mengetahui pengaruh bahan desensitasi pasca bleaching ekstrakoronal menggunakan H2O2 40% terhadap kekutan geser pelekatan restorasi resin komposit. Dua puluh satu gigi permanen insisivus yang telah dicabut dibagi dalam tiga kelompok masing-masing 7 gigi. Kelompok I dilakukan bleaching ekstrakoronal dengan H2O2 tanpa bahan desensitasi. Kelompok II dilakukan bleaching setelah itu diaplikasikan bahan desensitasi dan kelompok III sebagai kelompok kontrol. Semua gigi-gigi tersebut di rendam dalam saliva buatan dan dimasukkan inkubator selama 7 hari pada suhu 37 °C. Selanjutnya seluruh gigi dilakukan restorasi resin komposit menggunakan light cure halogen. Setelah itu dilakukan pengujian kekuatan geser pelekatan menggunakan universal testing machine. Data dianalisis menggunakan uji Kruskal - Wallis. Hasil penelitian menunjukkan bahwa tidak ada perbedaan kekuatan geser pelekatan pada semua kelompok perlakuan (p > 0,05). Dari penelitian ini disimpulkan bahwa tidak terdapat pengaruh aplikasi bahan desensitasi pasca bleaching ekstrakoronal terhadap kekuatan geser pelekatan restorasi resin komposit.

Resistência de união ao cisalhamento entre a resina composta e dentes artificiais de resina acrílica

2021 ◽  
Vol 10 (40) ◽  
pp. 33-37
Author(s):  
Joyce de Figueiredo Meira Barbosa ◽  
Lara Pepita de Souza Oliveira ◽  
Marcelo Nascimento Bruce ◽  
Jonas Alves Oliveira ◽  
Ligia Regina Mota Vasconcelos ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Acrylic Resin ◽  
Single Bond ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Artificial Teeth

Acrylic denture teeth may suffer fracture or wear requiring the need for repair. This study aimed to evaluate the shear bond strength between acrylic resin artificial teeth restored with composite resin (with two different surface treatments) and acrylic resin (AR), simulating repair with these materials. Thirty artificial incisors were included by the palatal side in a circular microwave-polymerized AR base and polished on their buccal side with 120 and 320 grit sandpaper in a metallographic polisher and, then, divided into three groups: (I) restoration with self-cured AR; (II) conventional restoration with Z-100 composite resin with application of acid etching and Single Bond-3M adhesive; and (III) restoration with Z-100 composite resin with submersion for 30 seconds in acetone and application of Single Bond-3M adhesive. Shear bond strength tests were performed in a Universal Testing Machine (Instron). The results were submitted to ANOVA and Tukey (p<0.05) tests, in which Group I (33.26MPa ±10.76) and Group III (22.24MPa ±13.13) showed no statistically significant difference, but both were superior to Group II (10.31MPa ±5.62), which showed a lower value of shear bond strength. It can be concluded that composite resin restoration with acetone pretreatment can be a viable alternative for repair.

The effect of caries detector dyes and a cavity cleansing agent on composite resin bonding to enamel and dentin

2001 ◽  
Vol 25 (1) ◽  
pp. 57-63 ◽  
Author(s):  
Azza El-Housseiny ◽  
Hana Jamjoum
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Testing Machine ◽  
Group Iv ◽  
Acid Etching ◽  
Group V ◽  
Universal Testing ◽  
Group I ◽  
Significant Difference

This study was undertaken to evaluate the effect of caries detector dyes and/or cavity cleanser on composite bonding and etching patterns of enamel and dentin. One hundred and eight non-carious premolars were divided into six groups according to the enamel and dentin pretreatment investigated. The different pretreatment were as follows: Group I: teeth with prophylaxis only, Group II: Sable seek caries detector dye,Groups III: chlorhexidine cavity cleanser,Group IV: the caries detectors dye followed by prophylaxis, Group V: the cavity cleanser followed by the caries detector dye, and Group IV: Snoop caries detector dye. The shear bond strength of composite resin bonded to enamel and dentin was evaluated by the Instron Universal testing machine while, the topographic details of enamel and dentin were examined by the SEM following the different pretreatment and acid etching. Results of the shear bond strength showed no statistically significant difference among the six groups, with no substantial differences in SEM results. It is concluded that using the caries detector dyes and/or chlorhexidine cavity cleanser before acid etching does not significantly affect composite bonding to enamel and dentin.

scholarly journals Shear bond strength of bulk-fill and nano-restorative materials to dentin

2016 ◽  
Vol 10 (01) ◽  
pp. 040-045 ◽  
Author(s):  
Hakan Colak ◽  
Ertugrul Ercan ◽  
Mehmet Mustafa Hamidi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Clinical Success ◽  
Testing Machine ◽  
Group Iv ◽  
Composite Resins ◽  
Group Iii ◽  
Bonding System ◽  
Group I ◽  
Significant Difference

ABSTRACT Objectives: Bulk-fill composite materials are being developed for preparation depths of up to 4 mm in an effort to simplify and improve the placement of direct composite posterior restorations. The aim of our study was to compare shear-bond strength of bulk-fill and conventional posterior composite resins. Materials and Methods: In this study, 60 caries free extracted human molars were used and sectioned parallel to occlusal surface to expose midcoronal dentin. The specimens were randomly divided into four groups. Total-etch dentine bonding system (Adper Scotchbond 1XT, 3M ESPE) was applied to dentin surface in all the groups to reduce variability in results. Then, dentine surfaces covered by following materials. Group I: SonicFill Bulk-Fill, Group II: Tetric EvoCeram (TBF), Group III: Herculite XRV Ultra, and Group IV: TBF Bulk-Fill, 2 mm × 3 mm cylindrical restorations were prepared by using application apparatus. Shear bond testing was measured by using a universal testing machine. Kruskal–Wallis and Mann–Whitney U-tests were performed to evaluate the data. Results: The highest value was observed in Group III (14.42 ± 4.34) and the lowest value was observed in Group IV (11.16 ± 2.76) and there is a statistically significant difference between these groups (P = 0.046). However, there is no statistically significant difference between the values of other groups. In this study, Group III was showed higher strength values. Conclusion: There is a need for future studies about long-term bond strength and clinical success of these adhesive and bulk-fill systems.

scholarly journals Comparison of the Shear bonding Strength of ION-Z GIC to a Resin Composite Using Different Adhesive Systems: RCT Study

2020 ◽  
Author(s):  
Sana Lala ◽  
Thuraya Lazkani
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Self Etch ◽  
Shear Bonding Strength

Abstract Background:In restorative dentistry we usually use Sandwich Technique for posterior restorations where GIC is placed below and a resin composite is placed over it. The bonding strength between these two materials are low. We are looking for the best adhesive system to put it in between. We think that the self-etching bond will give the best bonding strength between them whereas total etch will give lower bonding strength than self-etching system. Methods:ION-Z GIC was bonded to resin composite by using two different bonding agents. The thirty specimens used were prepared by using acrylic blocks with holes in each hole to retain the ION-Z GIC. The specimens were randomly divided into three groups:Group I: Control group.Group II: Total-etch adhesive was applied and cured over ION-Z GIC.Group III: Self-etch adhesive was applied and cured.The composite resin placed over the ION-Z GIC and cured. The shear bond strength was measured by shearing of the bonded specimens on Universal Testing Machine (Model 114) using speed of 0.1mm / minute. The reading was tabulated and subjected to statistical analysis using ANOVA and Tukey's test.Results:The test showed statistically significant difference between Group III and Group I and between Group III and Group II. Group III had the highest shear bonding strength.Conclusion:Self-etch adhesive agent produces have better shear bond strength to ION-Z than total-etch adhesive and to the group without any bonding agent.

Effect of Adhesive Boosters on Bond Strength of Bleached Teeth in Orthodontic Bonding

2021 ◽  
pp. 030157422110044
Author(s):  
I Ranganayakulu ◽  
D Praveen Kumar Varma ◽  
Padma Priya CV ◽  
RSVM Raghu Ram ◽  
K Anand Viswanadh ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Carbamide Peroxide ◽  
Universal Testing Machine ◽  
Universal Testing ◽  
Significant Difference ◽  
Maxillary Premolars ◽  
And Control

Objectives: To evaluate and compare the effect of adhesion boosters on shear bond strength (SBS) of orthodontic brackets on bleached teeth. Materials and Methods: A sample of 90 extracted maxillary premolars was equally divided into 2 groups of bleached and non-bleached teeth. Twenty-two percent carbamide peroxide gel was used as an agent for bleaching. Each group was further divided equally into 3 subgroups depending on the type of adhesive booster used (Enhance LC, All-bond 2, and no adhesive booster [control]) and maxillary premolars brackets were bonded. Debonding was done with a universal testing machine, and the SBS was recorded. Results: The SBS of non-bleached teeth was highest for All-bond 2 (14.78 ± 2.47 MPa) followed by Enhance LC (13.15 ± 3.49 MPa) and control (10.30 ± 1.06 MPa). The SBS of bleached teeth was highest for All bond 2 (12.23 ± 1.41 MPa) followed by Enhance LC (11.76 ± 1.71 MPa) and control (9.63 ± 1.06 MPa). All subgroups showed a significant difference in SBS (P = .000) on bleached and non-bleached teeth. The SBS showed a significant difference between the bleached and non-bleached teeth in All-bond 2 group (P = .019). Conclusion: Adhesive boosters increased the SBS of both bleached and non-bleached teeth significantly. Among the two adhesive boosters used, All-bond 2 showed more SBS values.

scholarly journals Effects of Potassium Nitrate and Oxalate Desensitizer Agents on Shear Bond Strengths of Orthodontic Brackets

2007 ◽  
Vol 77 (6) ◽  
pp. 1096-1100 ◽  
Author(s):  
Hakan Türkkahraman ◽  
Necdet Adanir
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Potassium Nitrate ◽  
Orthodontic Brackets ◽  
Group Iii ◽  
Group I ◽  
Halogen Light ◽  
Significant Difference ◽  
Bond Strengths

Abstract Objective: To evaluate the effects of potassium nitrate and oxalate desensitizer agents on shear bond strengths of orthodontic brackets. Materials and Methods: Forty-five extracted human premolar teeth were randomly assigned to three groups of 15 each. UltraEZ potassium nitrate desensitizer was applied on teeth in the first group, while BisBlock oxalate desensitizer was applied on teeth in the second group. The third group served as a control. Orthodontic brackets were bonded with a light cure composite resin and cured with a halogen light. After bonding, the shear bond strength of the brackets was tested with a universal testing machine. Results: The highest shear bond strengths were measured in Group III. The shear bond strength in Groups I and II was significantly lower than in Group III (P &lt; .001). Significant difference was also found between Group I and Group II (P &lt; .01). Conclusions: Orthodontic brackets bonded to enamel treated with potassium nitrate and oxalate desensitizers showed significantly lower bond strengths than did brackets bonded to untreated enamel.

scholarly journals Pengaruh Konsentrasi dan Lama Aplikasi Sodium Hipoklorit (NaOCL) sebagai Bahan Irigasi Saluran Akar terhadap Kekuatan Geser Perlekatan Siler Berbahan Dasar Resin Pada Dentin Saluran Akar

2012 ◽  
Vol 19 (1) ◽  
pp. 21
Author(s):  
Tunjung Nugraheni
Keyword(s):  
Bond Strength ◽  
Sodium Hypochlorite ◽  
Root Canal ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Universal Testing Machine ◽  
Root Canal Irrigation ◽  
Universal Testing ◽  
Group I ◽  
Root Canal Dentin

Latar belakang. Salah satu tahap penting perawatan saluran akar yaitu preparasi saluran akar. Pada preparasi saluran akar digunakan bahan Irigasi sodium hipoklorit (NaOCI), dengan konsentrasi 0,5%-5.25%. Penggunaan NaOCL berpengaruh pada struktur permukaan dentin saluran akar, yang selanjutnya mempengaruhi perlekatan dentin saluran akar dengan bahan pengisi saluran akar. Penelitian ini bertujuan untuk mengetahui pengaruh konsentrasi dan lama aplikasi NaOCI terhadap kekuatan geser perlekatan siler berbahan dasar resin pada dentin saluran akar. Metode Penelitian. Tiga puluh gigi premolar dipotong arah bukolingual, jaringan pulpa dibersihkan dan permukaan dentin saluran akar diratakan. Gigi difiksasi resin akrilik, sisi dentin saluran akar menghadap ke atas. Sampel dibagi menjadi 2 kelompok masing-masing 15 gigi, kelompok 1 di rendam dalam 6ml NaOCI 2,5%. Kelompok II direndam dalam 6 ml NaOCI 5%. Kelompok I dan II dibagi menjadi 3 sub kelompok lama perendaman, yaitu sub kelompok a direndam selama 5 menit, sub kelompok diremdam selama 10 menit, sub kelompok direndam selama 15 menit. Cetakan siler difiksasi pada akar gigi, dilakukan insersi siler ke dalam cetakan kemudian dimasukkan inkubaror pada suhu 370 C selama 72 jam. Pengujian kekuatan geser perlekatan menggunakan Universal Testing Machine. Hasil penelitian. Hasil uji statistik AVANA dua jalur menunjukkan kekuatan geser perlekatan siler berbahan dasar resin pada dentin saluran akar setelah diirigasi dengan konsentrasi NaOCI dan lama irigasi yang berbeda terdapat perbedaan yang bermakna (p=0,007). Uji LSD menunjukkan bahwa kekuatan geser perlekatan siler berbahan dasar resin berbeda bermakna pada kelompok yang diirigasi NaOCI 2,5% selama 5 menit dengan 15 menit,, pada kelompok yang diirigasi NaOCI 2,5% selama 10 menit dengan 15 menit, pada kelompok yang diirigasi NaOCI 5% selama 15 menit dengan kelompok yang diirigasi NaOCI 2,5% selama 15 menit serta pada kelompok yang diirigasi NaOCI 5% selama 5 menit dengan kelompok yang diirigasi NaOCI 5% selama 10 menit. Kesimpulan. Kekuatan geser perlekatan siler berbahan dasar resin pada dentin saluran akar berbeda setelah diirigasi NaOCI dengan konsentrasi dan waktu irigasi yang berbeda. Background. Biomechanichal preparationin of root canal treatment used 0,5-5,25% sodium Hypochlorite as root canal irrigation, that may effect to physical properties of dentin. The purpose of this study was to find out the effect of concentration and duration application of sodium hypochlorite to shear bond strength of sealer resin based to root canal dentin. Methods. Thirthy premolar were splitted buccolingual then pulp tissue were cleaned out, smoothed and fixed into acrylic resin cast. They were devided into 2 group, group I were soaking into NaOCI 2,5% group II were soaking into NaOCI 5%. Group I and II were devided into 3 subgroup, group a were soaking 5 minutes, group b were soaking 10 minutes. Group c were soaking 15 minutes. Then sealer cast were fixed and filled with sealer resin-based, and incubated for 74 hours. They were tested for shear bond strength with Universal Testing Machine. The data were analyzed with two way Anava and LSD. Result. Two way Avana show that shear bond strength of sealer resin-based to root canal after irrigation with different concentration and duration application of sodium hypochlorite are significant. Conclusion. Shear bond strength of sealer resin-based to root canal dentin after irrigation with different concentration and duration application of sodium hypochlorite are different.

scholarly journals Comparison of the Shear bonding Strength of ION-Z GIC to a Resin Composite Using Different Adhesive Systems: RCT Study

2021 ◽  
Author(s):  
Sana Lala ◽  
Thuraya Lazkani
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Self Etch ◽  
Shear Bonding Strength

Abstract Background:In restorative dentistry we usually use Sandwich Technique for posterior restorations where GIC is placed below and a resin composite is placed over it. The bonding strength between these two materials are low. We are looking for the best adhesive system to put it in between. We think that the self-etching bond will give the best bonding strength between them whereas total etch will give lower bonding strength than self-etching system. Methods:ION-Z GIC was bonded to resin composite by using two different bonding agents. The thirty specimens used were prepared by using acrylic blocks with holes in each hole to retain the ION-Z GIC. The specimens were randomly divided into three groups:Group I: Control group.Group II: Total-etch adhesive was applied and cured over ION-Z GIC.Group III: Self-etch adhesive was applied and cured.The composite resin placed over the ION-Z GIC and cured. The shear bond strength was measured by shearing of the bonded specimens on Universal Testing Machine (Model 114) using speed of 0.1mm / minute. The reading was tabulated and subjected to statistical analysis using ANOVA and Tukey's test.Results:The test showed statistically significant difference between Group III and Group I and between Group III and Group II. Group III had the highest shear bonding strength.Conclusion:Self-etch adhesive agent produces have better shear bond strength to ION-Z than total-etch adhesive and to the group without any bonding agent.

scholarly journals Comparative evaluation of superoxide dismutase, alpha-tocopherol, and 10% sodium ascorbate on reversal of shear bond strength of bleached enamel: An in vitro study

2016 ◽  
Vol 10 (01) ◽  
pp. 109-115 ◽  
Author(s):  
Mahendran Kavitha ◽  
Sharmila Selvaraj ◽  
Ambica Khetarpal ◽  
Aruna Raj ◽  
Shakunthala Pasupathy ◽  
...  
Keyword(s):  
Superoxide Dismutase ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Alpha Tocopherol ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Group I ◽  
Antioxidant Agents ◽  
Significant Difference

ABSTRACT Objective: The aim of this study was to investigate the neutralizer effect of antioxidant agents on the bond strength of bleached enamel. Materials and Methods: Sixty enamel slabs were prepared from 60 freshly extracted maxillary central incisors and were divided into six groups. The negative control group received no bleaching treatment and the other groups were bleached with 35% carbamide peroxide (Opalescence Quick; Ultradent, South Jordan, USA). In Group II, composite was built immediately after bleaching and cured without any antioxidants. In Group III, bleached specimens received composite build ups delayed by 1 week. In Groups IV, V, and VI bleached specimens received applications of superoxide dismutase (SOD), sodium ascorbate (SA), and tocopherol solutions, respectively, for 10 min. Following composite bonding, the micro shear bond strength (μSBS) was measured at a speed of 1 mm/min in universal testing machine. Statistical Analysis Used: The μSBS values of all the groups were analyzed using the analysis of variance followed by Tukey honestly significant difference post-hoc test. Results: Bonding of composites to unbleached group (Group I) exhibited the highest mean SBS values and among the antioxidant-treated groups, the highest SBS values were seen with SOD (Group IV) treated samples (23.0040 ± 4.30565 MPa). Conclusions: Application of SA, alpha-tocopherol, and SOD can effectively reverse the bond strength with bleached enamel. SOD gave a comparatively more promising reversal of bond strength than SA and alpha-tocopherol, and deserves further studies.

Sign in / Sign up

Export Citation Format

Share Document