scholarly journals EVOLUTION OF THE STRUCTURE OF TIN BRONZE AND COPPER AFTER DYNAMIC COMPRESSION BY THE KOLSKY METHOD USING A SPLIT HOPKINSON PRESSURE BAR

2019 ◽  
pp. 41-51
Author(s):  
A. V. Stolbovsky ◽  
◽  
V. V. Popov ◽  
R. M. Falakhutdinov ◽  
S. A. Murzinova ◽  
...  
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Hopkinson Pressure Bar ◽  
Kolsky Method ◽  
Tin Bronze ◽  
Split Hopkinson ◽  
Pressure Bar

Construction of Johnson-Cook Model for Gr2 Titanium through Adiabatic Heating Calculation

2014 ◽  
Vol 487 ◽  
pp. 7-14 ◽  
Author(s):  
Xi Guang Deng ◽  
Song Xiao Hui ◽  
Wen Jun Ye ◽  
Xiao Yun Song
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Heating Temperature ◽  
Dynamic Compression ◽  
Adiabatic Heating ◽  
Model Fit ◽  
Testing System ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
Split Hopkinson ◽  
Pressure Bar

This study derived the five parameters in Johnson-Cook equation of CP titanium Gr2. Quasi-static and dynamic compression tests were designed to measure mechanical properties at strain rates of 10-3s-1 and 6000s-1. In order to secure the validity of tested data, a novel fixture was proposed to reduce the displacement measurement error in MTS testing system and the signal processing procedure of compressive split Hopkinson pressure bar for the present study was demonstrated. With the tested data and calculated adiabatic heating temperature rise, parameters A, B, n, m, C have been derived based on mathematical deduction and solve. It was found that the constructed constitutive model fit the tested data well and was able to restore the yield strength value at high strain rate.

A comparative study on dynamic mechanical performance of concrete and rock

2015 ◽  
Author(s):  
Xia Zhengbing ◽  
Zhang Kefeng ◽  
Deng Yanfeng ◽  
Ge Fuwen
Keyword(s):  
Mechanical Performance ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Dynamic Mechanical ◽  
Strain And Strain Rate ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Relationship Of

Recently, engineering blasting is widely applied in projects such as rock mineral mining, construction of underground cavities and field-leveling excavation. Dynamic mechanical performance of rocks has been gradually attached importance both in China and abroad. Concrete and rock are two kinds of the most frequently used engineering materials and also frequently used as experimental objects currently. To compare dynamic mechanical performance of these two materials, this study performed dynamic compression test with five different strain rates on concrete and rock using Split Hopkinson Pressure Bar (SHPB) to obtain basic dynamic mechanical parameters of them and then summarized the relationship of dynamic compressive strength, peak strain and strain rate of two materials. Moreover, specific energy absorption is introduced to confirm dynamic damage mechanisms of concrete and rock materials. This work can not only help to improve working efficiency to the largest extent but also ensure the smooth development of engineering, providing rich theoretical guidance for development of related engineering in the future.

Dynamic Response and Fracture of High Strength Boride/Alumina Ceramic Composite

2006 ◽  
Vol 326-328 ◽  
pp. 1573-1576
Author(s):  
Dong Feng Cao ◽  
Li Sheng Liu ◽  
Jiang Tao Zhang
Keyword(s):  
Dynamic Response ◽  
Ceramic Composite ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
High Strength ◽  
Alumina Ceramic ◽  
Hopkinson Pressure Bar ◽  
Dynamic Loadings ◽  
Split Hopkinson ◽  
Pressure Bar

Dynamic response and fracture of high strength boride/alumina ceramic composite were investigated by split Hopkinson pressure bar (SHPB) experiment in this paper. The compressive stress–strain curves and dynamic compression strength of the composites were tested. The surface’s microstructure of fractured composites were examined by using scanning electron microscope (SEM) to investigate the fracture mechanism. The results show that boride/alumina has high dynamic compressive strength and high Young’s modulus. The main fracture mode of the material is the fracture of the ceramic grains. The micro-voids and flaws, generated during the sintering and manufacturing of material and mechanical process of specimen, decrease the strength of the material because they provide the source of crack expansion when the material undergoes the dynamic loadings.

Dynamic Compression Test of CFRP Laminates Using SHPB Technique

2014 ◽  
Vol 566 ◽  
pp. 122-127
Author(s):  
Takayuki Kusaka ◽  
Takanori Kono ◽  
Yasutoshi Nomura ◽  
Hiroki Wakabayashi
Keyword(s):  
Compressive Strength ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Failure Process ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Cfrp Laminates ◽  
Split Hopkinson ◽  
Pressure Bar

A novel experimental method was proposed for characterizing the compressive properties of composite materials under impact loading. Split Hopkinson pressure bar system was employed to carry out the dynamic compression tests. The dynamic stress-strain relations could be precisely estimated by the proposed method, where the ramped input, generated by the plastic deformation of a zinc buffer, was effective to reduce the oscillation of the stress field in the specimen. The longitudinal strain of gage area could be estimated from the nominal deformation of gage area, and consequently the failure process could be grasped in detail from the stress-strain relation. The dynamic compressive strength of the material was slightly higher than the static compressive strength. In addition, the validity of the proposed method was confirmed by the computational and experimental results.

scholarly journals Dynamic deformations tests of Ni3Al based intermetallic alloy by using the split Hopkinson pressure bar technique

2019 ◽  
Vol 55 (1) ◽  
pp. 129-134
Author(s):  
P. Jozwik ◽  
M. Kopec ◽  
W. Polkowski ◽  
Z. Bojar
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Intermetallic Alloy ◽  
Strong Impact ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Evaluation Point ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Deformation Tests

In this work, the Ni3Al-based intermetallic alloy was subjected to room temperature dynamic plastic deformation tests by using a split Hopkinson pressure bar technique. The dynamic compression processes were carried out at strain rates in the range of =(1.9x102 / 1x104 s-1). A strong impact of applied deformation conditions on microstructure and mechanical properties evolution in the examined Ni3Al intermetallic, was documented. Generally, very high maximum compressive stress values were obtained, reaching 5500 MPa for the sample deformed at the highest strain rate (i.e. ??=1x104 s-1). The results of performed SEM/EBSD evaluation point towards an occurrence of dynamic recovery and recrystallization phenomena in Ni3Al samples deformed at high strain rates.

Dynamic Compression Performance of Reaction Sintering SiC/B4C Composite

2020 ◽  
Vol 999 ◽  
pp. 83-90
Author(s):  
Xiao Ju Gao ◽  
Hasigaowa ◽  
Meng Yong Sun ◽  
Cheng Dong Liao ◽  
Wei Ping Huang ◽  
...  
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Dynamic Strength ◽  
Reaction Sintering ◽  
Hopkinson Pressure Bar ◽  
Compression Performance ◽  
Loading Mode ◽  
Split Hopkinson ◽  
Pressure Bar

SiC/B4C composite was obtained using the reaction sintering method with Si infiltration, which exhibited excellent mechanical properties. The dynamic compressive response was investigated using a Split Hopkinson pressure bar at high strain rates ranging from 0.4×103 to 1.2×103 s-1. The results show that the dynamic strength of the SiC/B4C composite obtains a peak value at a strain rate of 1000/s, while its strain increased continuously with increasing strain rate. The dynamic loading mode of SiC/B4C composite exhibited three deformation regions, including an inelastic deformation region, rapid loading region and failure region. The dynamic failure mode of SiC/B4C composite depended upon the strain rate.

Modelling of Micro-Concrete Behaviour under Static and Dynamic Loading

2014 ◽  
Vol 584-586 ◽  
pp. 1089-1096
Author(s):  
Remdane Boutemeur ◽  
Mustapha Demidem ◽  
Abderrahim Bali ◽  
El Hadi Benyoussef
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Dynamic Tests ◽  
Hopkinson Pressure Bar ◽  
Proposed Model ◽  
Wide Range ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Static And Dynamic Loading

The aim of this study is to present a model for assessing the dynamic compression behaviour of a micro-concrete. This model is based on the results of numerous tests providing the developments of the mechanical characteristics of the material on a wide range of strain rate from 10-4s-1to 10+3s-1.The Split Hopkinson Pressure Bar (SHPB) dispositive, based on the wave propagation theory in materials, has-been adopted to carry out the dynamic tests on the investigated material. The proposed model is composed of two terms, each characterizing the different contributions noted in the two major explored areas of strain rate.

Experiment on Mechanical Behavior of Reinforced Concrete Subjected to Impact Loading

2012 ◽  
Vol 450-451 ◽  
pp. 523-526 ◽  
Author(s):  
Hai Feng Liu ◽  
Wei Wu Yang ◽  
Jian Guo Ning
Keyword(s):  
Reinforced Concrete ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Peak Stress ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
Rate Dependent ◽  
Split Hopkinson ◽  
Reinforced Steel ◽  
Pressure Bar

The dynamic compression tests of reinforced concrete with different reinforcement ratios are carried out by split Hopkinson pressure bar (SHPB). Reinforced steel bar is placed along longitudinal and transverse direction. Experimental results show that reinforced concrete is non-linear and rate-dependent. With the enhancement of strain rate, the peak stress of reinforced concrete increases correspondingly

Dynamic Compression Properties of Low-Cost Ti-6Al-4V Plates

2016 ◽  
Vol 849 ◽  
pp. 276-280
Author(s):  
Rui Liu ◽  
Song Xiao Hui ◽  
Wen Jun Ye ◽  
Yang Yu ◽  
Yan Yan Fu ◽  
...  
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Low Cost ◽  
Hopkinson Pressure Bar ◽  
Homogeneous Microstructure ◽  
Strain Behavior ◽  
Compression Properties ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Hot Rolled

Ti-6Al-4V ingot with rectangle cross-section was directly manufactured by a single electron beam cold hearth melting (EBCHM) process, in which 65 wt.% recycled titanium scraps was used. The dynamic stress-strain behavior of the low-cost Ti-6Al-4V plates after heat treatment was investigated by Split Hopkinson Pressure Bar system at the strain rates of 2000 s-1~ 3000 s-1. The results showed that the plates with homogeneous microstructure could be obtained after two-heats hot rolled. The dynamic compression properties of low-cost Ti-6Al-4V plates in three different thicknesses were in the same level, which is comparable with that of commercial Ti-6Al-4V plates.

Sign in / Sign up

Export Citation Format

Share Document