scholarly journals Dynamic deformations tests of Ni3Al based intermetallic alloy by using the split Hopkinson pressure bar technique

2019 ◽  
Vol 55 (1) ◽  
pp. 129-134
Author(s):  
P. Jozwik ◽  
M. Kopec ◽  
W. Polkowski ◽  
Z. Bojar
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Intermetallic Alloy ◽  
Strong Impact ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Evaluation Point ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Deformation Tests

In this work, the Ni3Al-based intermetallic alloy was subjected to room temperature dynamic plastic deformation tests by using a split Hopkinson pressure bar technique. The dynamic compression processes were carried out at strain rates in the range of =(1.9x102 / 1x104 s-1). A strong impact of applied deformation conditions on microstructure and mechanical properties evolution in the examined Ni3Al intermetallic, was documented. Generally, very high maximum compressive stress values were obtained, reaching 5500 MPa for the sample deformed at the highest strain rate (i.e. ??=1x104 s-1). The results of performed SEM/EBSD evaluation point towards an occurrence of dynamic recovery and recrystallization phenomena in Ni3Al samples deformed at high strain rates.

Dynamic Compression Testing of Soft Materials

2002 ◽  
Vol 69 (3) ◽  
pp. 214-223 ◽  
Author(s):  
W. Chen ◽  
F. Lu ◽  
D. J. Frew ◽  
M. J. Forrestal
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Dynamic Equilibrium ◽  
Dynamic Compression ◽  
Soft Materials ◽  
Specimen Thickness ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Strain Responses

Low-strength and low-impedance materials pose significant challenges in the design of experiments to determine dynamic stress-strain responses. When these materials are tested with a conventional split Hopkinson pressure bar, the specimen will not deform homogeneously and the tests are not valid. To obtain valid data, the shape of the incident pulse and the specimen thickness must be designed such that the specimens are in dynamic equilibrium and deform homogeneously at constant strain rates. In addition, a sensitive transmission bar is required to detect the weak transmitted pulses. Experimental results show that homogeneous deformations at nearly constant strain rates can be achieved in materials with very low impedances, such as a silicone rubber and a polyurethane foam, with the experimental modifications presented in this study.

Deformation behavior of 42CrMo4 over a wide range of temperatures and strain rates in Split-Hopkinson pressure bar tests

2021 ◽  
pp. 141953
Author(s):  
Janis S. Kimm ◽  
Jim A. Bergmann ◽  
Florian Wöste ◽  
Fabian Pöhl ◽  
Petra Wiederkehr ◽  
...  
Keyword(s):  
Deformation Behavior ◽  
Split Hopkinson Pressure Bar ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Wide Range ◽  
Split Hopkinson ◽  
Pressure Bar

scholarly journals Study on the dynamic properties of AM-SLM AlSi10Mg alloy using the Split Hopkinson Pressure Bar (SHPB) technique

2018 ◽  
Vol 183 ◽  
pp. 04005 ◽  
Author(s):  
Bar Nurel ◽  
Moshe Nahmany ◽  
Adin Stern ◽  
Nahum Frage ◽  
Oren Sadot
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Properties ◽  
Rate Sensitivity ◽  
Strain Rate Range ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Static Mechanical ◽  
Split Hopkinson ◽  
Pressure Bar

Additive manufacturing by Selective Laser Melting of metals is attracting substantial attention, due to its advantages, such as short-time production of customized structures. This technique is useful for building complex components using a metallic pre-alloyed powder. One of the most used materials in AMSLM is AlSi10Mg powder. Additively manufactured AlSi10Mg may be used as a structural material and it static mechanical properties were widely investigated. Properties in the strain rates of 5×102–1.6×103 s-1 and at higher strain rates of 5×103 –105 s-1 have been also reported. The aim of this study is investigation of dynamic properties in the 7×102–8×103 s-1 strain rate range, using the split Hopkinson pressure bar technique. It was found that the dynamic properties at strain-rates of 1×103–3×103 s-1 depend on a build direction and affected by heat treatment. At higher and lower strain-rates the effect of build direction is limited. The anisotropic nature of the material was determined by the ellipticity of samples after the SHPB test. No strain rate sensitivity was observed.

Experimental Research of Foamed Ceramic Composite under Dynamic Loading Using SHPB

2013 ◽  
Vol 718-720 ◽  
pp. 112-116
Author(s):  
Xu Yang Li ◽  
Rui Yuan Huang ◽  
Yong Chi Li ◽  
Guang Fa Gao
Keyword(s):  
Ceramic Composite ◽  
Split Hopkinson Pressure Bar ◽  
Strain Rates ◽  
Test Results ◽  
Hopkinson Pressure Bar ◽  
Softening Effect ◽  
Stress Equilibrium ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Versus Strain

The Split Hopkinson Pressure Bar (SHPB) is used to investigate the dynamic compressive mechanical behavior of a new foamed ceramic composite under impact loading. The stress versus strain curves are obtained under high strain rates. The test results are considered to be able to assure conformability of the tests, validate the stress equilibrium assumption, and show that the stress versus strain curves of foamed ceramic composite display strain hardening effect and damage softening effect as brittle materials. Meanwhile the curve includes short plateau region while no densification region.

Construction of Johnson-Cook Model for Gr2 Titanium through Adiabatic Heating Calculation

2014 ◽  
Vol 487 ◽  
pp. 7-14 ◽  
Author(s):  
Xi Guang Deng ◽  
Song Xiao Hui ◽  
Wen Jun Ye ◽  
Xiao Yun Song
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Heating Temperature ◽  
Dynamic Compression ◽  
Adiabatic Heating ◽  
Model Fit ◽  
Testing System ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
Split Hopkinson ◽  
Pressure Bar

This study derived the five parameters in Johnson-Cook equation of CP titanium Gr2. Quasi-static and dynamic compression tests were designed to measure mechanical properties at strain rates of 10-3s-1 and 6000s-1. In order to secure the validity of tested data, a novel fixture was proposed to reduce the displacement measurement error in MTS testing system and the signal processing procedure of compressive split Hopkinson pressure bar for the present study was demonstrated. With the tested data and calculated adiabatic heating temperature rise, parameters A, B, n, m, C have been derived based on mathematical deduction and solve. It was found that the constructed constitutive model fit the tested data well and was able to restore the yield strength value at high strain rate.

A comparative study on dynamic mechanical performance of concrete and rock

2015 ◽  
Author(s):  
Xia Zhengbing ◽  
Zhang Kefeng ◽  
Deng Yanfeng ◽  
Ge Fuwen
Keyword(s):  
Mechanical Performance ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
Peak Strain ◽  
Hopkinson Pressure Bar ◽  
Dynamic Mechanical ◽  
Strain And Strain Rate ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Relationship Of

Recently, engineering blasting is widely applied in projects such as rock mineral mining, construction of underground cavities and field-leveling excavation. Dynamic mechanical performance of rocks has been gradually attached importance both in China and abroad. Concrete and rock are two kinds of the most frequently used engineering materials and also frequently used as experimental objects currently. To compare dynamic mechanical performance of these two materials, this study performed dynamic compression test with five different strain rates on concrete and rock using Split Hopkinson Pressure Bar (SHPB) to obtain basic dynamic mechanical parameters of them and then summarized the relationship of dynamic compressive strength, peak strain and strain rate of two materials. Moreover, specific energy absorption is introduced to confirm dynamic damage mechanisms of concrete and rock materials. This work can not only help to improve working efficiency to the largest extent but also ensure the smooth development of engineering, providing rich theoretical guidance for development of related engineering in the future.

Upper limit of constant strain rates in a split Hopkinson pressure bar experiment with elastic specimens

2005 ◽  
Vol 45 (5) ◽  
pp. 440-446 ◽  
Author(s):  
Y. Pan ◽  
W. Chen ◽  
B. Song
Keyword(s):  
Split Hopkinson Pressure Bar ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Upper Limit ◽  
Split Hopkinson ◽  
Pressure Bar

Using Split Hopkinson Pressure Bars to Perform Large Strain Compression Tests on Neoprene at Intermediate and High Strain Rates

2013 ◽  
Vol 631-632 ◽  
pp. 458-462 ◽  
Author(s):  
Peng Duo Zhao ◽  
Yu Wang ◽  
Jian Ye Du ◽  
Lei Zhang ◽  
Zhi Peng Du ◽  
...  
Keyword(s):  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Large Strain ◽  
Rate Sensitivity ◽  
Strain Rates ◽  
Compression Tests ◽  
Hopkinson Pressure Bar ◽  
High Strain Rates ◽  
Split Hopkinson ◽  
Pressure Bar

The strain rate sensitivity of neoprene is characterized using a modified split Hopkinson pressure bar (SHPB) system at intermediate (50 s-1, 100 s-1) and high (500 s-1, 1000 s-1) strain rates. We used two quartz piezoelectric force transducers that were sandwiched between the specimen and experimental bars respectively to directly measure the weak wave signals. A laser gap gage was employed to monitor the deformation of the sample directly. Three kinds of neoprene rubbers (Shore hardness: SHA60, SHA65, and SHA70) were tested using the modified split Hopkinson pressure bar. Experimental results show that the modified apparatus is effective and reliable for determining the compressive stress-strain responses of neoprene at intermediate and high strain rates.

Dynamic Response and Fracture of High Strength Boride/Alumina Ceramic Composite

2006 ◽  
Vol 326-328 ◽  
pp. 1573-1576
Author(s):  
Dong Feng Cao ◽  
Li Sheng Liu ◽  
Jiang Tao Zhang
Keyword(s):  
Dynamic Response ◽  
Ceramic Composite ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Compression ◽  
High Strength ◽  
Alumina Ceramic ◽  
Hopkinson Pressure Bar ◽  
Dynamic Loadings ◽  
Split Hopkinson ◽  
Pressure Bar

Dynamic response and fracture of high strength boride/alumina ceramic composite were investigated by split Hopkinson pressure bar (SHPB) experiment in this paper. The compressive stress–strain curves and dynamic compression strength of the composites were tested. The surface’s microstructure of fractured composites were examined by using scanning electron microscope (SEM) to investigate the fracture mechanism. The results show that boride/alumina has high dynamic compressive strength and high Young’s modulus. The main fracture mode of the material is the fracture of the ceramic grains. The micro-voids and flaws, generated during the sintering and manufacturing of material and mechanical process of specimen, decrease the strength of the material because they provide the source of crack expansion when the material undergoes the dynamic loadings.

Studies on the Dynamic Compressive Properties of Open-Celled Aluminum Alloy Foams

2006 ◽  
Vol 306-308 ◽  
pp. 905-910 ◽  
Author(s):  
Zhi Hua Wang ◽  
Hong Wei Ma ◽  
Long Mao Zhao ◽  
Gui Tong Yang
Keyword(s):  
Yield Strength ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Strain Rates ◽  
Hopkinson Pressure Bar ◽  
Aluminum Foams ◽  
Wide Range ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Dynamic Loading Conditions

The compressive deformation behavior of open-cell aluminum foams with different densities and morphologies was assessed under quasi-static and dynamic loading conditions. High strain rate experiments were conducted using a split Hopkinson pressure bar technique at strain rates ranging from 500 to 1 2000 − s . The experimental results shown that the compressive stress-strain curves of aluminum foams also have the “ three regions” character appeared in general foam materials, namely elastic region, collapse region and densification regions. It is found that density is the primary variable characterizing the modulus and yield strength of foams and the cell appears to have a negligible effect on the strength of foams. It also is found that yield strength and energy absorption is almost insensitive to strain rate and deformation is spatially uniform for the open-celled aluminum foams, over a wide range of strain rates.

Sign in / Sign up

Export Citation Format

Share Document