APPLICATION OF THE LAUE METHOD TO STUDY THE STRUCTURE OF A NICKEL HEAT-RESISTANT ALLOY SAMPLE DESTROYED DURING MECHANICAL PROCESSING

2020 ◽  
pp. 3-12
Author(s):  
N.A. Kuzmina ◽  
◽  
N.V. Petrushin ◽  
E.M. Visik ◽  
N.N. Eremin ◽  
...  
Keyword(s):  
Single Crystal ◽  
Structural Defects ◽  
Single Crystal Sample ◽  
Alloy Sample ◽  
Crystal Sample ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant ◽  
Mechanical Cutting ◽  
Laue Method

A study of the structure of a single-crystal sample of a nickel heat-resistant alloy, brittle destroyed by mechanical cutting. The study was carried out using x-ray diffractometry – «swing» and the Laue method. The possibilities of the Laue method for studying local defects of various origin are shown. Based on the obtained data, an assumption is made about the recrystallization nature of structural defects in a single crystal of a nickel heat-resistant alloy; the elastic properties of the single crystal are estimated.

Investigation of SLZhS32 BR economically doped heat-resistant alloy with single-crystal structure

2016 ◽  
Vol 7 (4) ◽  
pp. 564-569
Author(s):  
A. V. Logunov ◽  
Yu. N. Shmotin ◽  
S. A. Zavodov ◽  
I. A. Leshchenko ◽  
D. V. Danilov ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Single Crystal Structure ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant

Development of SLZhS32 BR economically doped heat-resistant alloy with single-crystal structure

2016 ◽  
Vol 7 (4) ◽  
pp. 531-535
Author(s):  
A. V. Logunov ◽  
Yu. N. Shmotin ◽  
S. A. Zavodov ◽  
I. A. Leshchenko ◽  
D. V. Danilov ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Single Crystal Structure ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant

Production Trial of a New Heat-Resistant Alloy with Low Density with Single-Crystal GTE Blade Casting

Metallurgist ◽  
2017 ◽  
Vol 61 (1-2) ◽  
pp. 162-169
Author(s):  
E. M. Visik ◽  
E. A. Tikhomirova ◽  
N. V. Petrushin ◽  
O. G. Ospennikova ◽  
V. V. Gerasimov ◽  
...  
Keyword(s):  
Single Crystal ◽  
Low Density ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant ◽  
Blade Casting

MIDOHM

Alloy Digest ◽  
1962 ◽  
Vol 11 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Specific Resistance ◽  
Operating Temperature ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant ◽  
Copper Nickel

Abstract Midohm is a copper-nickel, heat resistant alloy having a maximum operating temperature of 400 deg F. It is normally used for resistor and potentiometer applications where low specific resistance is required. This datasheet provides information on composition, physical properties, and tensile properties. Filing Code: Cu-117. Producer or source: Driver-Harris Company.

MO-RE 40MA

Alloy Digest ◽  
1998 ◽  
Vol 47 (12) ◽  
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Creep Strength ◽  
Heat Resistant Alloy ◽  
Resistant Alloy ◽  
Heat Resistant ◽  
Temperature Performance

Abstract MO-RE 40MA is a fully austenitic heat-resistant alloy for elevated temperature applications. The alloy is microalloyed for creep strength and oxidation resistance. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance. Filing Code: Ni-548. Producer or source: Duraloy Technologies Inc.

scholarly journals Stability and equation of state of face-centered cubic and hexagonal close packed phases of argon under pressure

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Agnès Dewaele ◽  
Angelika D. Rosa ◽  
Nicolas Guignot ◽  
Denis Andrault ◽  
João Elias F. S. Rodrigues ◽  
...  
Keyword(s):  
Equation Of State ◽  
Single Crystal ◽  
Single Crystal Sample ◽  
Moderate Pressure ◽  
Face Centered Cubic ◽  
Experimental Conditions ◽  
Crystal Sample ◽  
Hexagonal Close Packed ◽  
Face Centered ◽  
Fcc Phase

AbstractThe compression of argon is measured between 10 K and 296 K up to 20 GPa and and up to 114 GPa at 296 K in diamond anvil cells. Three samples conditioning are used: (1) single crystal sample directly compressed between the anvils, (2) powder sample directly compressed between the anvils, (3) single crystal sample compressed in a pressure medium. A partial transformation of the face-centered cubic (fcc) phase to a hexagonal close-packed (hcp) structure is observed above 4.2–13 GPa. Hcp phase forms through stacking faults in fcc-Ar and its amount depends on pressurizing conditions and starting fcc-Ar microstructure. The quasi-hydrostatic equation of state of the fcc phase is well described by a quasi-harmonic Mie–Grüneisen–Debye formalism, with the following 0 K parameters for Rydberg-Vinet equation: $$V_0$$ V 0 = 38.0 Å$$^3$$ 3 /at, $$K_0$$ K 0 = 2.65 GPa, $$K'_0$$ K 0 ′ = 7.423. Under the current experimental conditions, non-hydrostaticity affects measured P–V points mostly at moderate pressure ($$\le$$ ≤ 20 GPa).

Extending the temperature sensing range using Eu3+ luminescence up to 865 K in a single crystal of EuPO4

2019 ◽  
Vol 21 (29) ◽  
pp. 16329-16336 ◽  
Author(s):  
Suchinder K. Sharma ◽  
Thomas Köhler ◽  
Jan Beyer ◽  
Margret Fuchs ◽  
Richard Gloaguen ◽  
...  
Keyword(s):  
Single Crystal ◽  
Temperature Sensing ◽  
Single Crystal Sample ◽  
Coupling Scheme ◽  
Excitation Wavelength ◽  
Crystal Sample ◽  
Sensing Range

Extending the temperature sensing range up to 865 K using an appropriate choice of excitation wavelength and coupling scheme in a single crystal sample of EuPO4.

Sign in / Sign up

Export Citation Format

Share Document