scholarly journals Particle removal by two-phase filtration flow from a porous medium under wave action

Georesursy ◽  
2021 ◽  
Vol 23 (4) ◽  
pp. 58-64
Author(s):  
Anatoly Nikiforov ◽  
Roman Sadovnikov

The paper discusses the influence of wave action on the process of detachment and removal of particles from a porous body by a two-phase filtration flow. When modeling this process, the problem of the influence of the wave field on the force under the action of which the particles are detached from the pore walls is solved. For the first time, a pore-size distribution function is used for its solution. An expression for the critical flow velocity under wave action has been obtained. Critical frequency value of wave action depends on the capillary radius and the smaller the capillary radius is, the higher frequency is needed to enhance the effect of the action. At higher frequency of oscillation the peak of maximum change in the thickness of the sedimentary layer is shifted towards the pores of small radius. To maintain the influence of the wave field on the filtration parameters of the porous medium, the wave action should be carried out at a dynamically changing frequency range to increase the coverage of the effect of as many pores as possible. It is shown that particle removal during wave action increases due to the action of inertial forces, which reduce the influence of forces holding the particles on the pore surface.

Author(s):  
Elena Makarycheva

The aim of the article is to develop a method for calculating water losses from irrigation channels in determining the permeability of rock in the zone of filtration flow on the basis of the law of infiltration A.N. Kostyakov using the results of studies of free filtration from pits and foundation pits in loess loams. Pressure movement of water in irrigation canals is subject to the laws of two-phase flow, in which – in contrast to the Darcy law for the zone of saturation plays an important role, the volume and its change in time. The filtration rate (VF) increases with increasing rock moisture (θ) along the S-curve, while the pressure gradient (I = dh/dz) decreases. The dependences of these parameters on the pressure are represented by power functions, and their product CDP = VFI does not change in time and can serve as a characteristic of the filtration flow under the channel. When installing paired piezometers near the water chore line in the channel and determining the graph I(t) by the value of the twophase flow constant CDP, it is possible to calculate the filtration rate at a number of times and the water losses during unsteady filtration. Water losses from the channels at equilibrium humidity increases with increasing head according to the formula A.N. Kostyakova, in which the water permeability of rocks is characterized by a steady filtration rate at a head of 1.0 m, and the gradient is the function of pressure. The application of the proposed method of calculating losses in the design of irrigation systems will increase the reliability of the justification of the volume of anti-filtration measures and the forecast of the groundwater level.


2006 ◽  
Vol 9 (05) ◽  
pp. 530-542 ◽  
Author(s):  
Hadi Nasrabadi ◽  
Kassem Ghorayeb ◽  
Abbas Firoozabadi

Summary We present formulation and numerical solution of two-phase multicomponent diffusion and natural convection in porous media. Thermal diffusion, pressure diffusion, and molecular diffusion are included in the diffusion expression from thermodynamics of irreversible processes. The formulation and the numerical solution are used to perform initialization in a 2D cross section. We use both homogeneous and layered media without and with anisotropy in our calculations. Numerical examples for a binary mixture of C1/C3 and a multicomponent reservoir fluid are presented. Results show a strong effect of natural convection in species distribution. Results also show that there are at least two main rotating cells at steady state: one in the gas cap, and one in the oil column. Introduction Proper initialization is an important aspect of reliable reservoir simulations. The use of the Gibbs segregation condition generally cannot provide reliable initialization in hydrocarbon reservoirs. This is caused, in part, by the effect of thermal diffusion (caused by the geothermal temperature gradient), which cannot be neglected in some cases; thermal diffusion might be the main phenomenon affecting compositional variation in hydrocarbon reservoirs, especially for near-critical gas/condensate reservoirs (Ghorayeb et al. 2003). Generally, temperature increases with increasing burial depth because heat flows from the Earth's interior toward the surface. The temperature profile, or geothermal gradient, is related to the thermal conductivity of a body of rock and the heat flux. Thermal conductivity is not necessarily uniform because it depends on the mineralogical composition of the rock, the porosity, and the presence of water or gas. Therefore, differences in thermal conductivity between adjacent lithologies can result in a horizontal temperature gradient. Horizontal temperature gradients in some offshore fields can be observed because of a constant water temperature (approximately 4°C) in different depths in the seabed floor. The horizontal temperature gradient causes natural convection that might have a significant effect on species distribution (Firoozabadi 1999). The combined effects of diffusion (pressure, thermal, and molecular) and natural convection on compositional variation in multicomponent mixtures in porous media have been investigated for single-phase systems (Riley and Firoozabadi 1998; Ghorayeb and Firoozabadi 2000a).The results from these references show the importance of natural convection, which, in some cases, overrides diffusion and results in a uniform composition. Natural convection also can result in increased horizontal compositional variation, an effect similar to that in a thermogravitational column (Ghorayeb and Firoozabadi 2001; Nasrabadi et al. 2006). The combined effect of convection and diffusion on species separation has been the subject of many experimental studies. Separation in a thermogravitational column with both effects has been measured widely (Schott 1973; Costeseque 1982; El Mataaoui 1986). The thermogravitational column consists of two isothermal vertical plates with different temperatures separated by a narrow space. The space can be either without a porous medium or filled with a porous medium. The thermal diffusion, in a binary mixture, causes one component to segregate to the hot plate and the other to the cold plate. Because of the density gradient caused by temperature and concentration gradients, convection flow occurs and creates a concentration difference between the top and bottom of the column. Analytical and numerical models have been presented to analyze the experimental results (Lorenz and Emery 1959; Jamet et al. 1992; Nasrabadi et al. 2006). The experimental and theoretical studies show that the composition difference between the top and bottom of the column increases with permeability until an optimum permeability is reached. Then, the composition difference declines as permeability increases. The process in a thermogravitational column shows the significance of the convection from a horizontal temperature gradient.


2021 ◽  
Author(s):  
Alexandru Tatomir ◽  
Huhao Gao ◽  
Hiwa Abdullah ◽  
Martin Sauter

<p>Fluid-fluid interfacial area (IFA) in a two-phase flow in porous media is an important parameter for many geoscientific applications involving mass- and energy-transfer processes between the fluid-phases. Schaffer et al. (2013) introduced a new category of reactive tracers termed kinetically interface sensitive (KIS) tracers, able to quantify the size of the fluid-fluid IFA. In our previous experiments (Tatomir et al., 2018) we have demonstrated the application of the KIS tracers in a highly-controlled column experiment filled with a well-characterized porous medium consisting of well-sorted, spherical glass beads.</p><p>In this work we investigate several types of glass-bead materials and natural sands to quantitatively characterize the influence of the porous-medium grain-, pore-size and texture on the mobile interfacial area between an organic liquid and water. The fluid-fluid interfacial area is determined by interpretation of the breakthrough curves (BTCs) of the reaction product of the KIS tracer. When the tracer which is dissolved in the non-wetting phase meets the water, an irreversible hydrolysis process begins leading to the formation of two water-soluble products. For the experiments we use a peristaltic pump and a high precision injection pump to control the injection rate of the organic liquid and tracer.</p><p>A Darcy-scale numerical model is used to simulate the immiscible displacement process coupled with the reactive tracer transport across the fluid-fluid interface. The results show that the current reactive transport model is not always capable to reproduce the breakthrough curves of tracer experiments and that a new theoretical framework may be required.</p><p>Investigations of the role of solid surface area of the grains show that the grain surface roughness has an important influence on the IFA. . Furthermore, a linear relationship between the mobile capillary associated IFA and the inverse mean grain diameter can be established. The results are compared with the data collected from literature measured with high resolution microtomography and partitioning tracer methods. The capillary associated IFA values are consistently smaller because KIS tracers measure the mobile part of the interface. Through this study the applicability range of the KIS tracers is considerably expanded and the confidence in the robustness of the method is improved.</p><p> </p><p> </p><p>Schaffer M, Maier F, Licha T, Sauter M (2013) A new generation of tracers for the characterization of interfacial areas during supercritical carbon dioxide injections into deep saline aquifers: Kinetic interface-sensitive tracers (KIS tracer). International Journal of Greenhouse Gas Control 14:200–208. https://doi.org/10.1016/j.ijggc.2013.01.020</p><p>Tatomir A, Vriendt KD, Zhou D, et al (2018) Kinetic Interface Sensitive Tracers: Experimental Validation in a Two-Phase Flow Column Experiment. A Proof of Concept. Water Resources Research 54:10,223-10,241. https://doi.org/10.1029/2018WR022621</p>


1987 ◽  
Vol 109 (4) ◽  
pp. 997-1002 ◽  
Author(s):  
A. Nakayama ◽  
H. Koyama ◽  
F. Kuwahara

The two-phase boundary layer theory was adopted to investigate subcooled free-convection film boiling over a body of arbitrary shape embedded in a porous medium. A general similarity variable which accounts for the geometric effect on the boundary layer length scale was introduced to treat the problem once for all possible two-dimensional and axisymmetric bodies. By virtue of this generalized transformation, the set of governing equations and boundary conditions for an arbitrary shape reduces into the one for a vertical flat plate already solved by Cheng and Verma. Thus, the numerical values furnished for a flat plate may readily be tranlsated for any particular body configuration of concern. Furthermore, an explicit Nusselt number expression in terms of the parameters associated with the degrees of subcooling and superheating has been established upon considering physical limiting conditions.


Sign in / Sign up

Export Citation Format

Share Document