scholarly journals Observations from PEMS testing of combustion engines of different applications

2018 ◽  
Vol 174 (3) ◽  
pp. 40-55
Author(s):  
Jerzy MERKISZ ◽  
Jacek PIELECHA
Keyword(s):  
Internal Combustion Engines ◽  
Dynamic Properties ◽  
Operating Time ◽  
Carbon Dioxide Emission ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Vehicle Speed ◽  
Combustion Engines ◽  
The Road ◽  
Procedure Guidelines

The article compares data obtained in road tests with the latest legislative proposals relating to various applications of internal combustion engines. Passenger car emission tests have been performed several times on the same test route in accordance with the RDE procedure guidelines, for which a dozen or so criteria must be met, including the distance of each of the drive sections, their in the drive time and the dynamic characteristics of the drive. The analysis was also based on a two-dimensional operating density characterization, presented in the vehicle speed-acceleration coordinates. As a result, it was possible to compare dynamic properties, operating time density and, thus, to check the validity of conducted drive tests in terms of their feasibility and emission values. An exhaust emission related comparison of three types of powertrain have been presented: gasoline, diesel and hybrid in the RDE tests. The authors proposed a new form of presenting the road exhaust emissions results in relation to the carbon dioxide emission, referred to as a standardization of the emission results. The exhaust emissions from city buses fitted with different powertrains tested on an actual bus route and in the SORT test were also compared.

scholarly journals The impact of vehicle dynamic parameters on the exhaust emissions in RDE tests

2018 ◽  
Vol 175 (4) ◽  
pp. 26-34
Author(s):  
Jacek PIELECHA ◽  
Karolina KURTYKA ◽  
Kinga SKOBIEJ
Keyword(s):  
Internal Combustion Engines ◽  
Exhaust Emissions ◽  
Exhaust Emission ◽  
Dynamic Parameters ◽  
Passenger Cars ◽  
The Road ◽  
Positive Acceleration ◽  
Legislative Proposals ◽  
Test Route ◽  
The Impact

The article compares driving test data using the latest legislative proposals applicable to passenger cars with different drives. For this purpose, cars of one type were selected, meeting the same exhaust toxicity standard (Euro 6c) and differing in used internal combustion engines (with spark-ignition, compression-ignition and hybrid drive). Several measurements were performed on the same test route in accordance with the RDE test guidelines, which requires a several of criteria to be met. These criteria include the length of the measuring sections, their overall timeshare and the dynamic characteristics of the drive. A portable emissions measurement system (PEMS) was used to record the engine and vehicle operating parameters and to measure the exhaust emissions during tests. This allowed for the monitoring of parameters such as: load value, engine speed and vehicle velocity. Then the obtained results were analyzed for their compatibility with the RDE procedure requirements. By determining the road emission of individual harmful compounds for all vehicles and the dynamic parameters of drive (relative positive acceleration and product of speed and positive acceleration) in various phases of the road test it was possible to compare them. On this basis, the impact of dynamic conditions of road tests on the obtained results of the road exhaust emission of harmful compounds for passenger cars with various drives was defined.

A Simple Combustion Efficiency Indicator for Automobile Engines

1973 ◽  
Vol 6 (10) ◽  
pp. 399-400 ◽  
Author(s):  
M. S. Bolton ◽  
D. S. Taylor
Keyword(s):  
Carbon Monoxide ◽  
Internal Combustion Engines ◽  
Fuel Mixture ◽  
Internal Combustion ◽  
Combustion Efficiency ◽  
Exhaust Emission ◽  
Combustion Engines ◽  
Widespread Application ◽  
Mixture Ratio ◽  
Automobile Engines

A cheap device which can indicate carbon monoxide levels in exhaust emission of internal combustion engines, and hence could be used for adjusting the engine's operating air: fuel mixture ratio, would have widespread application in garages, etc. The instrument described here is sensitive to both unburnt hydrocarbons and carbon monoxide but measures the carbon monoxide to an accuracy well within the tuning capability of most carburation systems.

scholarly journals The Impact of Powering an Engine with Fuels from Renewable Energy Sources including its Software Modification on a Drive Unit Performance Parameters

2019 ◽  
Vol 11 (23) ◽  
pp. 6585 ◽  
Author(s):  
Markiewicz ◽  
Muślewski
Keyword(s):  
Renewable Energy ◽  
Internal Combustion Engines ◽  
Combustion Engine ◽  
Renewable Energy Sources ◽  
Internal Combustion ◽  
Energy Sources ◽  
Exhaust Emission ◽  
Combustion Engines ◽  
Performance Parameters ◽  
The Impact

The application of fuels from renewable energy sources for combustion engine powering involves a great demand for this kind of energy while its production infrastructure remains underdeveloped. The use of this kind of fuel is supposed to reduce the emission of greenhouse gases and the depletion of natural resources and to increase the share of renewable energy sources in total energy consumption and thus support sustainable development in Europe. This study presents the results of research on selected performance parameters of transport by internal combustion engines including: power, torque, the emission of sound generated by the engine, the content of exhaust components (oxygen O2, carbon monoxide CO, carbon dioxide CO2, nitrogen dioxide NO2), and the content of particulate matter (PM) in exhaust emission. Three self-ignition engines were tested. The fuel injection controllers of the tested internal combustion engines were additionally adjusted by increasing the fuel dose and the load of air. The material used in the tests were mixtures of diesel oil and fatty acid methyl esters of different concentration. A statistical analysis was performed based of the results. The purpose of the work was to develop a resulting model for assessing the operation of engines fueled with biofuel and diesel mixtures while changing the vehicle's computer software. A computer simulation algorithm was also developed for the needs of the tests which was used to prognose the state of the test results for variable input parameters.

Sign in / Sign up

Export Citation Format

Share Document