scholarly journals Characterization and Thermal Aging Tests of Cr Based Multilayer for Unconcentrated Solar Thermal Applications

Author(s):  
Antonio Caldarelli ◽  
Carmine D'Alessandro ◽  
Davide De Maio ◽  
Daniela De Luca ◽  
Eliana Gaudino ◽  
...  

Optical characterization and thermal aging tests are performed on a sputter-deposited coating, consisting of SiO2/Cr2O3/Cr/Cr2O3 layers, designed and developed as a selective solar absorber to be used for unconcentrated solar thermal applications. Both measurements are performed by using a home-made apparatus, which mimics a flat plate collector under high vacuum. A Performance Criterion (PCη(T)), based on absorber efficiency is proposed, and a forecast of service lifetime is obtained. As a result of the thermal aging tests, the selective solar absorber under study appears to be highly efficient at mid temperatures (up to 573 K) and thermally stable at temperatures (up to 690 K).

Author(s):  
Tribeni Das ◽  
Ganesh C Bora

This chapter includes brief description of different solar thermal applications of greenhouse structure based on the different research work done in this area. It provides the basic knowledge of the use of solar energy to increase the production of different agricultural products using greenhouse system, e.g., crop production and drying of agricultural products. The chapter includes the introduction of greenhouse system, the definition, the concept, and the importance of greenhouse technology. The uses of various solar thermal applications in different greenhouse systems such as flat plate collector in greenhouse fish pond system and application of photovoltaic system in greenhouse drying are covered in this chapter.


Author(s):  
Roberto Russo ◽  
Davide De Maio ◽  
Carmine D'Alessandro ◽  
Antonio Caldarelli ◽  
Eliana Gaudino ◽  
...  

2021 ◽  
pp. 138870
Author(s):  
Antonio CALDARELLI ◽  
Carmine D'ALESSANDRO ◽  
Davide DE MAIO ◽  
Daniela DE LUCA ◽  
Eliana GAUDINO ◽  
...  

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 900
Author(s):  
Davide De Maio ◽  
Carmine D’Alessandro ◽  
Antonio Caldarelli ◽  
Daniela De Luca ◽  
Emiliano Di Gennaro ◽  
...  

A new Selective Solar Absorber, designed to improve the Sun-to-thermal conversion efficiency at mid temperatures in high vacuum flat thermal collectors, is presented. Efficiency has been evaluated by using analytical formulas and a numerical thermal model. Both results have been experimentally validated using a commercial absorber in a custom experimental set-up. The optimization procedure aimed at obtaining Selective Solar Absorber is presented and discussed in the case of a metal dielectric multilayer based on Cr2O3 and Ti. The importance of adopting a real spectral emissivity curve to estimate high thermal efficiency at high temperatures in a selective solar absorber is outlined. Optimized absorber multilayers can be 10% more efficient than the commercial alternative at 250 °C operating temperatures, reaching 400 °C stagnation temperature without Sun concentration confirming that high vacuum flat thermal collectors can give important contribution to the energy transition from fossil fuels to renewable energy for efficient heat production.


2021 ◽  
pp. 60-71
Author(s):  
Tshewang Darjay ◽  
Cheku Dorji ◽  
Tshewang Lhendup ◽  
Martin Elborg

The Royal Government of Bhutan has accorded the highest priority towards diversifying the energy-mix through the promotion of renewable energy technologies. There is a national target to generate 3 MW equivalent of energy from the installation of solar thermal systems alone. However, little investment and priority are given for development of solar thermal applications. Some of the present existing solar water heating (SWH) systems are exhibiting faults which leads to low consumer confidence in SWH technology due to the non-functioning of previous installations which is very detrimental in this introductory stage. This study aims to identify problems of existing SWH systems through field surveys and develop a draft guideline to avoid faults in the future. To analyse the problems with existing SWH systems in Bhutan, the first phase of the study consists of collecting secondary information and opinion from the relevant government sector, local installing companies and end-users. The information on the manufacturer’s products, policy barriers, markets and consumer challenges is also collected. Base on this information, findings on the limitation of existing policy instrument and gap in demand and supply side is described. The second phase of the study comprises field visits to existing SWH system sites. The field surveys of twelve representative existing SWH systems are analyzed. Out of twelve sites, eight SWH systems had critical faults which causes major failure of the system and the other four sites had minor faults. To analyse the faults of existing SWH systems, faults are classified into design faults, plumbing circuit faults, solar collector faults, absorber faults, installation faults and user behavior faults. The major faults which lead to the failure of the existing SWH system are plumbing failure, condensation inside the collector and absorber tube leakage. The causes and solutions of the faults are discussed.


Sign in / Sign up

Export Citation Format

Share Document