Production Technology Of Daqing Oil-Field During Its High Water-Cut Stage

1986 ◽  
Author(s):  
Demin Wang ◽  
Jiali Tand
Keyword(s):  
Production Technology ◽  
High Water ◽  
Oil Field ◽  
Daqing Oil Field ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

Optimization Design for Oil-Water Separator of Injection-Production Technology in the same Well

2013 ◽  
Vol 803 ◽  
pp. 383-386
Author(s):  
Shu Ren Yang ◽  
Di Xu ◽  
Chao Yu ◽  
Jia Wei Fan ◽  
Cheng Chu Yue Fu
Keyword(s):  
Production Technology ◽  
Optimization Design ◽  
Large Scale ◽  
High Water ◽  
Oil Field ◽  
Production Costs ◽  
Water Separator ◽  
Oil Water ◽  
High Water Cut ◽  
Water Cut

In order to solve the problem of high water cut wells in some oil field in Daqing that it could not get the large-scale application because of the bad separating effect of down hole centrifugal oil-water separator, we optimize the design of multi-cup uniform flux oil-water separator according to the similar separation principle of multi-cup uniform flux gas anchor, and it is obtained to achieve of injection-production technology in the same well which is of high water cut. The design concept of the separator is increasing the number of opening every layer and aperture gradually in subsection from up to down in the design process. The purpose is to get the close intake quantity of every orifice and guarantee the residence time is long enough in the separator, effectively shorten the length of down hole oil-water separator and reduce the production costs and operating costs.

Research on Methods of Separate Stratum Injection Allocation in High Water Cut Stage

2013 ◽  
Vol 868 ◽  
pp. 645-650
Author(s):  
Lin Li
Keyword(s):  
Material Balance ◽  
High Water ◽  
Small Error ◽  
Oil Field ◽  
Petroleum Reservoir ◽  
Injection Wells ◽  
Single Well ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

The parameters of reservoir impact all the sectors of oilfield developing after flood development, so methods of separate stratum injection allocation are researched for forecasting the petroleum reservoir performance accurately. The methods of separate stratum injection allocation are significative for remaining oil distribution, injection allocation of interval and the level of exploitation and administration in high water cut stage. First, we should derive injection-withdrawal ratio (IWR), gradient of pressure and water cut by material balance equation.The injection allocation of single well,injection wells and property of interval are determined by the research of split coefficient.We find the reservoir small error, lower water cut, high degree of reservoir recovery by anaysising the results of separate stratum injection allocation.The results show that separate stratum injection allocation is scientific and reasonable, simple and applied for the oil field in high water cut stage.

Calculation of Pipeline Hydraulic in High Water Cut Stage of Oil Field

ICPTT 2009 ◽  
2009 ◽  
Author(s):  
ChengTing Liu ◽  
Zhao Yang ◽  
Han Qu
Keyword(s):  
High Water ◽  
Oil Field ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

On the Feasibility of Applying Electric Field to Increase Oil Recovery in Old Oil Field

2014 ◽  
Vol 900 ◽  
pp. 677-680
Author(s):  
Chun Hong Nie
Keyword(s):  
Electric Field ◽  
Oil Recovery ◽  
Water Injection ◽  
High Water ◽  
Oil Field ◽  
Thin Layers ◽  
Stable Yield ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

This paper has discussed the characteristics, roles, feasibility and obvious effects of the technology by applying electric field to enhance oil recovery when the oil field is in high water cut stage and super high water cut stage. In view that most oil wells in old oil field have entered into the super high water cut production, the remaining oil in the main reservoir is in fragmented distribution with poor results of water injection and new reserves of oil mostly have a low penetration rate and are thin layers of poor physical properties, the use of the direct current field in period of high water cut is the best policy to achieve high and stable yield and is fairly promising.

Analysis all Kinds of Reservoir Water Degree Condition of East Xing Six District of Daqing Oilfield

2013 ◽  
Vol 868 ◽  
pp. 585-588
Author(s):  
Yi Kun Liu ◽  
Xue Ming Wang ◽  
Shi Yuan Shao ◽  
Ming Yang ◽  
Yong Ping Wang
Keyword(s):  
High Water ◽  
Oil Field ◽  
Water Flooding ◽  
Reservoir Water ◽  
Thickness Change ◽  
Degree Condition ◽  
Well Pattern ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

East Xing Six District of Daqing oilfield development has 50 years of history, the block has entered high well density, high water cut stage. The apricot East Xing Six District demonstration zone development belongs to the continental sedimentary system, it has reservoir types and physical properties have large differences, It was long-term effected by injected water, after water flooding, water degree condition becomes very complex and unpredictable, so the washing condition analysis is an important guarantee for Daqing oilfield stable production. Using the oil field sealed coring well data, various types of reservoirs washing degree thickness change and growth are analyzed, We can know that with the further water flooding development and well pattern infilling, all kinds of oil reservoir production status; and then analyzes the potential distribution of the oilfields, and provides a basis for the development of the block and the adjustment of the next step of work, has an important guiding significance.

scholarly journals Study on Technical Measures of Romashkino Oil Field after Entering Ultra-High Water Cut Stage

Engineering ◽  
2013 ◽  
Vol 05 (07) ◽  
pp. 622-628 ◽  
Author(s):  
Liuli Lu ◽  
Zhibin Liu ◽  
Haohan Liu ◽  
Yongqin Yan
Keyword(s):  
High Water ◽  
Oil Field ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Technical Measures

Study on Adjustment of Atratigraphic Subdivision and Well Pattern Infilling for Offshore Heavy Oil Field in High Water Cut Stage

2020 ◽  
Author(s):  
Lai Yun Zhang ◽  
Yong Hu ◽  
Qiang Bao Jin ◽  
Wei Zhang ◽  
Lei Ji Zhang ◽  
...  
Keyword(s):  
Heavy Oil ◽  
High Water ◽  
Oil Field ◽  
Well Pattern ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

A New Method of Calculating Recovery of Waterflooding Reservoir by Using Production Rate

2013 ◽  
Vol 704 ◽  
pp. 321-325 ◽  
Author(s):  
Li Bing Fu ◽  
Lun Zhao ◽  
Yu Feng Zhang ◽  
Ze Min Ji ◽  
Qing Ying Hou ◽  
...  
Keyword(s):  
Production Rate ◽  
Mass Conservation ◽  
High Water ◽  
Oil Field ◽  
Physical Conditions ◽  
Shengli Oilfield ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
The Relationship

Development characteristics of oil field during production-decreasing stage were analyzed in this paper. The ultimate recovery factor can be determined at a limit of oil production rate by investigating the relationship between production rate and recovery percent. Some physical conditions were given. Based on the mass conservation principal and seepage mechanics method, it was found that the recovery degree varies versus production rate linearly. The model prediction using the actual data of west Ng63+4oil strata in Gudong 7 region, a reservoir in Shengli oilfield of China, was performed. The results demonstrated that the linear model had well estimation of the recoverable recovery of oil fields which were at the later period of high water cut stage.

Research on Evaluation about Measures with Water Plugging in the West of Bei 3 Area of Daqing Saertu Oilfield

2013 ◽  
Vol 726-731 ◽  
pp. 3084-3088
Author(s):  
Shang Ming Shi ◽  
Nan Zheng ◽  
Hua Bin Wei ◽  
Bo Zhang ◽  
Dong Kai Huo
Keyword(s):  
Comprehensive Evaluation ◽  
High Water ◽  
Oil Field ◽  
Effective Measure ◽  
Water Formation ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Swept Volume ◽  
Oilfield Development

Measure of plugging water refers to through sealing high water formation to slow down the contradiction between lays, so as to increase the liquid production of low water formation and to increase the swept volume the extent of reserves producing. It is an important measure that aims at the rapid increasing of liquid-oil ratio in late stage of high water-cut, to keep the stable production of oil field. It is an effective measure to reduce and control the useless water production rate which not only can increase the fluid production sensibly but also can slow down the production decline and guarantee the economic rationality in oilfield development. Field practice has proved that the measure of plugging water has a better guiding significance to the reservoir in late high or extra high water-cut stage. Through analyzing the effect of plugging water, and a comprehensive evaluation of the effect of plugging water, we can find out the key factors that affect the measures of plugging water, which has a better guiding significance to maximize the high water cut oilfield development profit.

Sign in / Sign up

Export Citation Format

Share Document