Best Configuration of Horizontal and Vertical Wells for Heavy Oil Thermal Recovery from Thin Net Pay Zones (Russian)

Abstract Dimensionless pressure gradients and dimensionless pressure derivatives characteristics are studied for horizontal and vertical wells completed within a pair of no-flow boundaries inclined at a general angle ‘θ’. Infinite-acting flow solution of each well is utilized. Image distances as a result of the inclinations are considered. The superposition principle is further utilized to calculate total pressure drop due to flow from both object and image wells. Characteristic dimensionless flow pressure gradients and pressure derivatives for the wells are finally determined. The number of images formed due to the inclination and dimensionless well design affect the dimensionless pressure gradients and their derivatives. For n images, shortly after very early time for each inclination, dimensionless pressure gradients of 1.151(N+1)/LD for the horizontal well and 1.151(N+1) for vertical well are observed. Dimensionless pressure derivative of (N+1)/2LD are observed for central and off-centered horizontal well locations, and (N+1)/2 for vertical well are observed. Central well locations do not affect horizontal well productivity for all the inclinations. The magnitudes of dimensionless pressure drop and dimensionless pressure derivatives are maximum at the farthest image distances, and are unaffected by well stand-off for the horizontal well.

Download Full-text

Application and Exploration of Early In-Situ Combustion Huff-and-Puff Technology in a Deep Undisturbed Reservoir with Extra Heavy Oil

SPE Reservoir Evaluation & Engineering ◽

10.2118/205391-pa ◽

2021 ◽

pp. 1-13

Author(s):

Wang Xiaoyan ◽

Zhao Jian ◽

Yin Qingguo ◽

Cao Bao ◽

Zhang Yang ◽

...

Keyword(s):

High Pressure ◽

High Temperature ◽

Heavy Oil ◽

Gas Injection ◽

Thermal Recovery ◽

Oil Field ◽

Pilot Test ◽

In Situ Combustion ◽

Coiled Tubing

Summary Achieving effective results using conventional thermal recovery technology is challenging in the deep undisturbed reservoir with extra-heavy oil in the LKQ oil field. Therefore, in this study, a novel approach based on in-situ combustion huff-and-puff technology is proposed. Through physical and numerical simulations of the reservoir, the oil recovery mechanism and key injection and production parameters of early-stage ultraheavy oil were investigated, and a series of key engineering supporting technologies were developed that were confirmed to be feasible via a pilot test. The results revealed that the ultraheavy oil in the LKQ oil field could achieve oxidation combustion under a high ignition temperature of greater than 450°C, where in-situ cracking and upgrading could occur, leading to greatly decreased viscosity of ultraheavy oil and significantly improved mobility. Moreover, it could achieve higher extra-heavy-oil production combined with the energy supplement of flue gas injection. The reasonable cycles of in-situ combustion huff and puff were five cycles, with the first cycle of gas injection of 300 000 m3 and the gas injection volume per cycle increasing in turn. It was predicted that the incremental oil production of a single well would be 500 t in one cycle. In addition, the supporting technologies were developed, such as a coiled-tubing electric ignition system, an integrated temperature and pressure monitoring system in coiled tubing, anticorrosion cementing and completion technology with high-temperature and high-pressure thermal recovery, and anticorrosion injection-production integrated lifting technology. The proposed method was applied to a pilot test in the YS3 well in the LKQ oil field. The high-pressure ignition was achieved in the 2200-m-deep well using the coiled-tubing electric igniter. The maximum temperature tolerance of the integrated monitoring system in coiled tubing reached up to 1200°C, which provided the functions of distributed temperature and multipoint pressure measurement in the entire wellbore. The combination of 13Cr-P110 casing and titanium alloy tubing effectively reduced the high-temperature and high-pressure oxygen corrosion of the wellbore. The successful field test of the comprehensive supporting engineering technologies presents a new approach for effective production in deep extra-heavy-oil reservoirs.

Download Full-text

Phase Behaviour and Physical Properties of Dimethyl Ether DME/CO2/Water/Heavy Oil Systems under Reservoir Conditions

10.2118/206171-ms ◽

2021 ◽

Author(s):

Desheng Huang ◽

Yunlong Li ◽

Daoyong Yang

Keyword(s):

Physical Properties ◽

Heavy Oil ◽

Vapour Phase ◽

Thermal Recovery ◽

Phase Behaviour ◽

Binary Interaction ◽

Molar Ratio ◽

Polar Components ◽

Translation Strategy ◽

Oil Mixtures

Abstract In this paper, techniques have been developed to quantify phase behaviour and physical properties including phase boundaries, swelling factors, and phase volumes for reservoir fluids containing polar components from both experimental and theoretical aspects. Experimentally, a total of five pressure-volume-temperature (PVT) experiments including three sets of DME/CO2/heavy oil systems and two sets of DME/CO2/water/heavy oil systems have been carried out to measure saturation pressures, phase volumes, and swelling factors by using a versatile PVT setup. Theoretically, the modified Peng-Robinson equation of state (PR EOS) incorporated with the Huron-Vidal mixing rule and the Péneloux volume-translation strategy is employed as the thermodynamic model to perform phase equilibrium calculations. It is observed that the experimentally measured saturation pressures of DME/CO2/water/heavy oil mixtures are higher than those of DME/CO2/heavy oil mixtures at the same temperature and same molar ratio of solvents and heavy oil, owing to the fact that more water molecules can be evaporated into vapour phase. The binary interaction parameters (BIPs) between DME/heavy oil and CO2/DME pair, which are obtained by matching the measured saturation pressures of DME/CO2/heavy oil mixtures, work well for DME/CO2/heavy oil mixtures in the presence and absence of water. In addition, a swelling effect of heavy oil can be enhanced by adding the DME and CO2 mixtures compared to only DME or CO2. The new model developed in this work is capable of accurately reproducing the experimentally measured multiphase boundaries, swelling factors, phase volumes with a root-mean-squared relative error (RMSRE) of 4.68%, 0.71%, and 9.35%, respectively, indicating that it can provide fundamental data for simulating, designing, and optimizing the hybrid solvent-thermal recovery processes for heavy oil reservoirs.

Download Full-text