Using New Intervention-less Surveillance Technology to Optimize the Implementation of Waterflood

2021 ◽  
Author(s):  
Ali Al Anbari ◽  
Mahmood Al Harthi ◽  
Suryyendu Choudhury ◽  
Evert-Jan Borkent ◽  
Petrus In ‘T Panhuis ◽  
...  

Abstract The value of implementing intervention-less downhole surveillance technology lies in early assessment of field-scale reservoir performance and well deliverability in South Oman's largest waterflood development. Such technology can aid in assessing whether aquifer support by means of (controlled) fracture injection is achievable, which is potentially more valuable than matrix injection to enhance oil production. At the same time HSSE exposure and deferment will be reduced by avoiding well interventions. This paper will share learnings from Distributed Fiber-Optic (FO) Sensing technology. More specifically, this paper will present the case study of field ‘A’, where waterflood is being operated in two methods based on sectors depending on field geological and reservoir properties: ‘Deep’ water injection in the aquifer, under fracture conditions ‘Shallow’ water injection close to the oil-water-contact (OWC), under matrix conditions ‘Deep’ water injection minimizes the risk of early water breakthrough, but it delays the aquifer pressure support which in turn means lower offtake. The ‘Shallow’ water injection (trialed by injecting water 50m below OWC) has a higher risk of water short circuiting, accelerates pressure support and thereby enhances production / well deliverability. Fiber-optic data is part of a decision-based surveillance program, which also included injection / production logging via PLT, step-rate tests, and pressure monitoring. The time-lapse data has illustrated some fracture growth up- and downwards of the perforation interval in most wells but is still contained below the OWC. In some wells, the injection growth is also controlled by the presence of several intra-reservoir shale baffles that are acting as barriers to vertical communication and thereby delaying the injection response while inducing a strong pressure response in nearby producers. The data has helped to further calibrate and validate the model assumptions and will help in optimizing the waterflood development concept for the field. Proactive interventional-less surveillance enables monitoring of the zonal injection conformance, provides advantage of learning reservoir performance and supports agile WRFM operations and decision making. Furthermore, cost competitive and credible technology have made PDO a front runner to keep subsurface risk at as low as reasonably practical levels and boost oil production. This distributed fiber optic sensing technology provided cost-effective, fit-for-purpose, and intervention-less well-and-reservoir surveillance.

2021 ◽  
Author(s):  
Ali Al Jumah ◽  
Abdulkareem Hindawi ◽  
Fakhriya Shuaibi ◽  
Jasbindra Singh ◽  
Mohamed Siyabi ◽  
...  

Abstract The South Oman clusters A and B have reclassified their Deep-Water Disposal wells (DWD) into water injection (WI) wells. This is a novel concept where the excess treated water will be used in the plantation of additional reed beds (Cluster A) and the farming of palm trees (Cluster B), as well as act as pressure support for nearby fields. This will help solve multiple issues at different levels namely helping the business achieve its objective of sustained oil production, helping local communities with employment and helping the organization care for the environment by reducing carbon footprints. This reclassification covers a huge water volume in Field-A and Field-B where 60,000 m3/day and 40,000 m3/day will be injected respectively in the aquifer. The remaining total excess volume of approx. 200,000m3/d will be used for reed beds and Million Date Palm trees Project. The approach followed for the reclassification and routing of water will: Safeguard the field value (oil reserves) by optimum water injectionMaintain the cap-rock integrity by reduced water injection into the aquifer.Reduce GHG intensity by ±50% as a result of (i) reduced power consumption to run the DWD pumps and (ii) the plantation of trees (reed beds and palm trees).Generate ICV (in-country value) opportunities in the area of operations for the local community to use the excess water at surface for various projects.Figure 1DWD Reclassification benefits Multiple teams (subsurface. Surface, operations), interfaces and systems have been associated to reflect the re-classification project. This was done through collaboration of different teams and sections (i.e. EC, EDM, SAP, Nibras, OFM, etc). Water injection targets and several KPIs have been incorporated in various dashboards for monitoring and compliance purposes. Figure 2Teams Integration and interfaces It offers not only a significant boost to the sustainability of the business, but also pursues PDO's Water Management Strategy to reduce Disposal to Zero by no later than the year 2030 This paper will discuss how the project was managed, explain the evaluation done to understand the extent of the pressure support in nearby fields from DWD and the required disposal rate to maintain the desired pressures. Hence, reclassifying that part of deep-water disposal volume to water injection (WI) which requires a totally different water flood management system to be built around it.


2021 ◽  
Author(s):  
Jorge Gomes ◽  
Jane Mason ◽  
Graham Edmonstone

This paper highlights the application of downhole fiber optic (FO) distributed temperature sensing (DTS) measurements for well and reservoir management applications: 1) Wellbore water injectivity profiling. 2) Mapping of injection water movement in an underlying reservoir. The U.A.E. field in question is an elongated anticline containing several stacked carbonate oil bearing reservoirs (Figure 1). Reservoir A, where two DTS monitored, peripheral horizontal water injectors (Y-1 and Y-2) were drilled, is less developed and tighter than the immediately underlying, more prolific Reservoir B with 40 years of oil production and water injection history. Reservoirs A and B are of Lower Cretaceous age, limestone fabrics made up of several 4th order cycles, subdivided by several thin intra dense, 2-5 ft thick stylolitic intervals within the reservoir zones. Between Reservoir A and Reservoir B there is a dense limestone interval (30-50 ft), referred as dense layer in the Figure 1 well sections.


2016 ◽  
Vol 28 (1) ◽  
pp. 61-72
Author(s):  
Mohammad Amirul Islam ◽  
ASM Woobaidullah ◽  
Badrul Imam

Haripur field is the first oil producing field in Bangladesh. The field produced approximately 0.53 MMSTB of oil from the well No. SY-7. The oil production began in 1987 and terminated in 1994. All of the oil was produced by the reservoir own energy from the depth of 2030 meter. Recent investigation and study have revealed that approximately 31 MMSTB Oil is remaining in that formation as validated by the reservoir performance based study i.e. oil production rate and tube head pressure history matching. At present condition, the reservoir has no pressure energy to lift the oil to surface as it requires minimum 1500 psi pressure, so it needs pressure energy to lift the oil to surface. Among the recent developed technologies water injection is one of the best methods to sweep oil towards the production well from the injection well as well as to provide sufficient pressure for lifting. In this study we proposed design for optimum waterflooding pattern and defined optimum number of injection and production wells. In addition the production and injection rates are optimized along with selection of the best placement of production and injection wells and their life.Bangladesh J. Sci. Res. 28(1): 61-72, June-2015


2020 ◽  
Vol 52 (1) ◽  
pp. 479-487 ◽  
Author(s):  
Andrew G. Couch ◽  
Samantha Eatwell ◽  
Olu Daini

AbstractThe Huntington Oil Field is located in Block 22/14b in the Central Graben of the UK Continental Shelf. The reservoir is the Forties Sandstone Member of the Sele Formation, and oil production is from four production wells supported by two water-injection wells, tied back to the Sevan Voyageur FPSO (floating production storage and offloading unit). Initial estimates of oil-in-place were c. 70 MMbbl and the recovery factor at the end of 2017 after 4.5 years of production was 28%, which reflects the weak aquifer and poor pressure support from water injection. The Huntington reservoir is part of a lobate sheet sand system, where low-concentration turbidite sands and linked debrites are preserved between thin mudstones of regional extent. Within the reservoir, three of the thicker mudstone beds can be correlated biostratigraphically on a regional basis. This stacked lobate part of the system sits above a large-scale deep-water Forties channel that is backfilled by a system of vertically aggrading channel storeys. Despite the relatively high net/gross of the reservoir, the thin but laterally extensive mudstones in the upper (lobate) part of the system are effective aquitards and barriers to pressure support from water.


Author(s):  
Jon R. Ineson ◽  
John S. Peel

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Ineson, J. R., & Peel, J. S. (1997). Cambrian shelf stratigraphy of North Greenland. Geology of Greenland Survey Bulletin, 173, 1-120. https://doi.org/10.34194/ggub.v173.5024 _______________ The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.


Author(s):  
Elton J. B. Ribeiro ◽  
Zhimin Tan ◽  
Yucheng Hou ◽  
Yanqiu Zhang ◽  
Andre Iwane

Currently the oil and gas industry is focusing on challenging deep water projects, particularly in Campos Basin located coast off Brazil. However, there are a lot of prolific reservoirs located in shallow water, which need to be developed and they are located in area very far from the coast, where there aren’t pipelines facilities to export oil production, in this case is necessary to use a floating production unit able to storage produced oil, such as a FPSO. So, the riser system configuration should be able to absorb FPSO’s dynamic response due to wave load and avoid damage at touch down zone, in this case is recommended to use compliant riser configuration, such as Lazy Wave, Tethered Wave or Lazy S. In addition to, the proposed FPSO for Tubarão Martelo development is a type VLCC (Very Large Crude Carrier) using external turret moored system, which cause large vertical motion at riser connection and it presents large static offset. Also are expected to install 26 risers and umbilicals hanging off on the turret, this large number of risers and umbilicals has driven the main concerns to clashing and clearance requirement since Lazy-S configuration was adopted. In this paper, some numerical model details and recommendations will be presented, which became a feasible challenging risers system in shallow water. For instance, to solve clashing problem it is strictly recommended for modeling MWA (Mid Water Arch) gutter and bend stiffener at top I-tube interface, this recommendation doesn’t matter in deep water, but for shallow water problem is very important. Also is important to use ballast modules in order to solve clashing problems.


1949 ◽  
Vol 7c (7) ◽  
pp. 432-448 ◽  
Author(s):  
Viola M. Davidson

Underyearling salmon in a circular pond of moving water at 20–25 °C. swam during the day and rested on the bottom at night. Before feeding they translocated actively upstream in rapid shallow water and in all directions in slow deep water. During feeding they held position in slow water, but made short excursions to seize food. After feeding, most moved into rapid, shallow water, the largest into the most rapid water.Translocating salmon usually went upstream and swam faster in more rapid water so that the rate of translocation remained constant. The rate of translocation increased with the size of the fish, more than doubling from 3 to 4 cm. in length.While steady illumination caused the salmon to swim up in the water from the bottom, a sudden change in light intensity when they were swimming, as by an object moving against the sky, caused them to swim quickly from shallow to deep water.Eels translocated upstream regularly only in the more rapid water, the swimming rate increasing with current rate. Eels 7 cm. long translocated almost twice as rapidly as salmon 3.5 cm. long. Eels burrowed in the gravel in bright daylight, came out in the evening and translocated rapidly even at night when the salmon were resting.


2021 ◽  
Author(s):  
Li Zhang ◽  
Lei Xing ◽  
Mingyu Dong ◽  
Weimin Chen

Abstract Articulated pusher barge vessel is a short-distance transport vessel with good economic performance and practicability, which is widely used in the Yangtze River of China. In this present work, the resistance performance of articulated pusher barge vessel in deep water and shallow water was studied by model tests in the towing tank and basin of Shanghai Ship and Shipping Research Institute. During the experimental investigation, the articulated pusher barge vessel was divided into three parts: the pusher, the barge and the articulated pusher barge system. Firstly, the deep water resistance performance of the articulated pusher barge system, barge and the pusher at design draught T was studied, then the water depth h was adjusted, and the shallow water resistance at h/T = 2.0, 1.5 and 1.2 was tested and studied respectively, and the difference between deep water resistance and shallow water resistance at design draught were compared. The results of model tests and analysis show that: 1) in the study of deep water resistance, the total resistance of the barge was larger than that of the articulated pusher barge system. 2) for the barge, the shallow water resistance increases about 0.4–0.7 times at h/T = 2.0, 0.5–1.1 times at h/T = 1.5, and 0.7–2.3 times at h/T = 1.2. 3) for the pusher, the shallow water resistance increases about 1.0–0.4 times at h/T = 2.7, 1.2–0.9 times at h/T = 2.0, and 1.7–2.4 times at h/T = 1.6. 4) for the articulated pusher barge system, the shallow water resistance increases about 0.2–0.3 times at h/T = 2.0, 0.5–1.3 times at h/T = 1.5, and 1.0–3.5 times at h/T = 1.2. Furthermore, the water depth Froude number Frh in shallow water was compared with the changing trend of resistance in shallow water.


Sign in / Sign up

Export Citation Format

Share Document