Resistance Tests of an Articulated Pusher Barge System in Deep and Shallow Water

2021 ◽  
Author(s):  
Li Zhang ◽  
Lei Xing ◽  
Mingyu Dong ◽  
Weimin Chen

Abstract Articulated pusher barge vessel is a short-distance transport vessel with good economic performance and practicability, which is widely used in the Yangtze River of China. In this present work, the resistance performance of articulated pusher barge vessel in deep water and shallow water was studied by model tests in the towing tank and basin of Shanghai Ship and Shipping Research Institute. During the experimental investigation, the articulated pusher barge vessel was divided into three parts: the pusher, the barge and the articulated pusher barge system. Firstly, the deep water resistance performance of the articulated pusher barge system, barge and the pusher at design draught T was studied, then the water depth h was adjusted, and the shallow water resistance at h/T = 2.0, 1.5 and 1.2 was tested and studied respectively, and the difference between deep water resistance and shallow water resistance at design draught were compared. The results of model tests and analysis show that: 1) in the study of deep water resistance, the total resistance of the barge was larger than that of the articulated pusher barge system. 2) for the barge, the shallow water resistance increases about 0.4–0.7 times at h/T = 2.0, 0.5–1.1 times at h/T = 1.5, and 0.7–2.3 times at h/T = 1.2. 3) for the pusher, the shallow water resistance increases about 1.0–0.4 times at h/T = 2.7, 1.2–0.9 times at h/T = 2.0, and 1.7–2.4 times at h/T = 1.6. 4) for the articulated pusher barge system, the shallow water resistance increases about 0.2–0.3 times at h/T = 2.0, 0.5–1.3 times at h/T = 1.5, and 1.0–3.5 times at h/T = 1.2. Furthermore, the water depth Froude number Frh in shallow water was compared with the changing trend of resistance in shallow water.

Author(s):  
Rodrigo A. Barreira ◽  
Vinicius L. Vileti ◽  
Joel S. Sales ◽  
Sergio H. Sphaier ◽  
Paulo de Tarso T. Esperança

A new conceptual design of a deepwater MONOBUOY, named DeepWater MultiColumn Buoy (DWMCB), patent PCT/BR2011/000133, was developed by PETROBRAS/CENPES. The DWMCB was designed to be part of an offloading system for a Spread Moored Floating Production Offloading Unit (FPSO). The offloading system principle consists of Oil being exported from the FPSO to a Shutle tanker passing through Offloading Oil Lines (OOLs) that are supported by the DWMCB. The system is designed to operate at a water depth of 2,200 meters, with expected in site life duration of 25 years. The geometry of DWMCB was defined after an optimization process in order to minimize its motions. This paper describes the development of this concept and discusses the results from some design verifications done with the help of a model tests campaign. An equivalent traditional shaped monobuoy was also tested for comparison purposes.


1994 ◽  
Vol 34 (7) ◽  
pp. 927 ◽  
Author(s):  
RL Williams ◽  
JF Angus

A field experiment was conducted to investigate the interaction of nitrogen (N) status, sowing date, and water depth on rice yield in the Murray Valley, New South Wales, where low minimum temperatures often lead to pollen sterility and low yield in high N status crops. The experiment combined 4 N rates (0, 75, 125, 250 kg N/ha) applied as urea just before permanent flood; 3 cultivars (Jarrah, early maturing; Amaroo and Doongara, midseason); 2 sowing dates (26 September, 31 October 1991); and 2 water depths (5, 20 cm) at the microspore stage. The early-sown crops and the later sown Jarrah crop encountered minimum air temperatures of 19�C at the cold-sensitive microspore stage, compared with 15�C for the other 2 later sown crops. Total dry matter production was little affected by either water depth or sowing date, but increased from 16 to 22 t/ha with N application. Shallow water depth and delayed sowing date affected yield through reduced harvest index. Grain yield response to N fertiliser was dependent on sowing date, water depth, and variety. For the early-sown crops grown in deep water, yields of Amaroo and Jarrah-increased from 7 to 13 t/ha with increasing N supply, while the yield response of Doongara plateaued at 9 t/ha. With shallow water, the yields of all varieties decreased from 7 to 3 t/ha with increasing N. For the later sowing date, Jarrah growing in deep water yielded up to 13 t/ha at high N, but yields of Amaroo and Doongara decreased from 7 to 2 t/ha with increasing N supply. For the later sowing date, yields of all varieties growing in shallow water decreased to <2 t/ha with applied N. In the deep water crops, developing microspores were submerged or partially submerged and so avoided low air minimum temperatures. In the early-sown crops, the microspore stage occurred during a period of relatively warm nights. Harvest index was successfully modelled using panicle temperature and N content at early pollen microspore. The experiment shows that high N applications can lead to high rice yields provided the microspores are protected from low temperatures by the use of deep water at the stage of microspore development. As a result, recommendations for N fertiliser application need to be adjusted for sowing date and expected water depth at early pollen microspore


Author(s):  
Wenhua Zhao ◽  
Hugh Wolgamot ◽  
Scott Draper ◽  
Paul H. Taylor ◽  
Rodney Eatock Taylor ◽  
...  

Floating liquefied natural gas (FLNG) facilities are a new type of offshore structure, which have been developed as a game changer in offshore hydrocarbon development for unlocking stranded gas reserves. One of the key challenges associated is offloading from FLNG facilities to LNG carriers. Offloading may proceed with vessels in a side-by-side configuration, which allows offtake by un-modified vessels and minimizes requirements for new hardware or procedures (e.g. compared to a tandem operation). Significant challenges remain, however, and reliable offloading is critical for successful FLNG implementation. In this scenario, the two vessels are separated by a narrow 4 m wide gap. The resonant response of the sea surface in the gap has been predicted by numerical simulations [1] to be a few times that of the incident waves at particular frequencies. As a consequence, the gap resonant response may play a role in determining the operational window for side-by-side offloading operations, and thus has attracted a lot of attention recently. There have been studies on this topic both numerically and experimentally. However, many of these studies are in 2 dimensions (2D), for relatively large gaps and relatively shallow water depth, which may pose difficulties when extending the results to a real project. It is unclear what will happen for a gap resonance if the gap width gets narrower (say 4 m in full scale) and the water depth gets deeper (say 600 m in full scale). In this study, we conducted a series of model tests at a scale of 1:60 in a large wave basin, and focused on deep water and, crucially, narrow gaps, which are closer to a real project geometry. To facilitate future numerical simulations, we used two identical fixed bodies in the model tests and the vessels were simple barge-like shapes. Using white noise waves as the excitation, which covers a broad brand, the response of the fluid in the gap has been measured at several points. In these experiments, different modes of the gap resonance have been observed. Response amplitude operators (RAOs) of the gap resonance have been obtained through spectral analyses, which provide valuable information for the design of side-by-side operations and will benefit future numerical simulations. Test runs in white noise waves with different significant wave heights were also performed, to study the nonlinearities of the gap resonance phenomenon.


2011 ◽  
Vol 1 (6) ◽  
pp. 12
Author(s):  
J. G.H.R. Diephuis ◽  
J. G. Gerritze

This paper deals with the problem of determining the wave characteristics in shallow water from those in deep water. In general this can be done by means of a refraction calculation. If the sea bottom topography is too irregular the height of the waves can be determined by means of a small-scale refraction model. In both cases, however, some additional effects have to be taken into account, viz. the influence of the bottom friction and the influence of the wind.


Author(s):  
Michael Sturm ◽  
Elena G. Vologina ◽  
Svetlana S. Vorob’eva

<p>We here present new data on sedimentation at and near the steep north-slopes of southern Lake Baikal. Short sediment cores were taken at 550 m and at 1366 m water depth, within 3600 m offshore Cape Ivanovskii at the station of the <em>Baikal Deep Underwater NEUTRINO</em> <em>Telescope</em>. The sediments within 3600 m off the northern coast of Southern Lake Baikal are dominated by pelagic deposition. Our data reveal surprisingly little influence from terrigenous material from adjacent coastal areas, tributaries and their catchment. At the shallow-water site (at 550 m water depth, 700 m off shore) just 27 cm thick homogenous sediments have accumulated during the Holocene on top of Pleistocene deposits resulting in Holocene sedimentation rates of 0.003 cm a<sup>-1</sup>. The very low rates are caused by long-term persistent winnowing of fine particles caused by week contour currents along the slope. The uppermost sediments are oxidized down to 22 cm. Very low concentrations of C<sub>org</sub>, Si<sub>bio</sub> and N<sub>tot</sub> in Pleistocene sediments increase dramatically within the Holocene. The heavy mineral fraction of the shallow-water sediments contains up to 33.6 % olivine and up to 2.4 % spinel. These rare minerals originate from white marbles of the nearby coastal outcrop <em>Belaya Vyemka</em> of the Early Precambrian <em>Sharyzalgaiskaya</em> <em>Series</em>. At the deep-water site (at 1366 m water depth, 3600 m off shore) Holocene sedimentation rates are 10-times higher (0.036 cm a<sup>-1</sup>). Sediment oxidation occurs just within the uppermost 2 cm. Of the two rare type minerals of the <em>Sharyzalgaiskaya</em> <em>Series</em> spinel does not occur at all and olivine is represented by very diminished concentrations. This indicates insignificant influx of terrestrial material from the nearby shore to the deep-water site . Distal turbidites of far-off sources are intercalated to pelagic sediments at the deep-water site. Breakdown events of deltas at the SE- and S-coast of the basin are suggested to be responsible for the formation of the turbidites. They contain terrestrial (deltaic) material, low amounts of biological material (diatoms, spiculae, chrysophyte cysts), low concentrations of Si<sub>bio</sub>, C<sub>org </sub>and N<sub>tot</sub> and occur at approximate recurrence rates of 300 years. </p>


Author(s):  
Roberto Tonelli ◽  
Frans Quadvlieg

This paper gives the results of free running model tests for the KVLCC2 in shallow water. The paper describes how free running model tests in shallow water are carried out, and gives the results of free running model tests at two shallow water depths, corresponding to a water depth to draught ratio h/T of 1.2 and 1.5. Free running (partly) turning circle tests and zigzag tests are carried out in shallow water in a dedicated shallow water basin where the water depth is lowered to sail above a concrete floor, while measuring the level of flatness of the concrete floor. The ITTC issued a brand new approach to perform uncertainty analysis for free running manoeuvring tests. For a proper comparison of simulations to model tests, it is of prime importance to not just know the results of a free running manoeuvre, but also to know the uncertainty of the results. This paper addresses also the uncertainty of the results. The combination of the results of the model tests and the uncertainty analysis allows the use of this data as benchmark data.


1970 ◽  
Vol 19 (2) ◽  
pp. 111-118
Author(s):  
Md Almujaddade Alfasane ◽  
Moniruzzaman Khondker ◽  
ZN Tahmida Begum

Water depth showed significant effect on the growth of Nelumbo nucifera Gaertn. in deep and shallow water culture pits. In deep water culture pit, the leaf area showed its highest growth rate of 21.84 ± 2.89 cm2/day in summer and petiole length showed highest growth rate of 0.34 ± 0.10 cm/day in monsoon. The plantlets grown in shallow water culture pit showed highest growth rate of leaf area of 8.75 ± 0.91 cm2/day in summer and the length of the petiole was highest in monsoon (0.25 ± 0.03 cm/day). Comparatively highest growth was observed in deep water culture pit rather than that of shallow water. Highest growth of the plant and flowering were found to be associated with higher water depth (100 cm) where the plant grew up to a height of about 1.5 m and maximum leaf diameter was 50 cm. Poor growth of the plant with no flowering was in shallow water depth (20 cm) where maximum height of the plant was about 0.5 m and leaf diameter was 25 cm. Although the concentrations of NO3?N, soluble reactive phosphorus, soluble reactive silicate, planktonic chl a and phaeopigment were in higher amount in shallow water culture pit but due to shallow depthness plant showed poor growth and no flowering.    Key words: Water depth; Limnological factors; Growth; Nelumbo nucifera DOI: http://dx.doi.org/10.3329/dujbs.v19i2.8952 DUJBS 2010; 19(2): 111-118


Author(s):  
Timothy E. Kendon ◽  
Ola Oritsland ◽  
Rolf J. Baarholm ◽  
Svein I. Karlsen ◽  
Carl-Trygve Stansberg ◽  
...  

Model test verification of floater systems in ultra-deep water meets limitations when it comes to available laboratory sizes. Systems in depths beyond 1000–1500 m cannot be tested at reasonable scales without the truncation of the mooring and riser system. The development of methods and procedures to overcome this problem has been addressed through extensive research programs at MARINTEK (VERIDEEP, VERIDEEP Extension, NDP, DEMO2000). This led to a hybrid verification procedure which combines reasonable truncation principles, model tests of the truncated system, and numerical simulations, to estimate the system’s response at full depth. There is, however, still a need to address the actual influence from the truncation procedure, and from the integration with simulations, on the final extrapolated full depth results. This paper presents a case study for the validation of the procedure, that compares full depth model test results of a semisubmersible in water depth 1250m against the extrapolated full depth results obtained from a truncated system of 500m. Results are presented for line tension and vessel responses in 3 seastates. In general the extrapolated full depth results were found to be in good agreement with the full depth model tests. However, the results confirmed expectation that the low frequency response has the greater uncertainties and presents the greatest challenge for the procedure.


Author(s):  
Jon R. Ineson ◽  
John S. Peel

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Ineson, J. R., & Peel, J. S. (1997). Cambrian shelf stratigraphy of North Greenland. Geology of Greenland Survey Bulletin, 173, 1-120. https://doi.org/10.34194/ggub.v173.5024 _______________ The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.The Lower Palaeozoic Franklinian Basin is extensively exposed in northern Greenland and the Canadian Arctic Islands. For much of the early Palaeozoic, the basin consisted of a southern shelf, bordering the craton, and a northern deep-water trough; the boundary between the shelf and the trough shifted southwards with time. In North Greenland, the evolution of the shelf during the Cambrian is recorded by the Skagen Group, the Portfjeld and Buen Formations and the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups; the lithostratigraphy of these last three groups forms the main focus of this paper. The Skagen Group, a mixed carbonate-siliciclastic shelf succession of earliest Cambrian age was deposited prior to the development of a deep-water trough. The succeeding Portfjeld Formation represents an extensive shallow-water carbonate platform that covered much of the shelf; marked differentiation of the shelf and trough occurred at this time. Following exposure and karstification of this platform, the shelf was progressively transgressed and the siliciclastics of the Buen Formation were deposited. From the late Early Cambrian to the Early Ordovician, the shelf showed a terraced profile, with a flat-topped shallow-water carbonate platform in the south passing northwards via a carbonate slope apron into a deeper-water outer shelf region. The evolution of this platform and outer shelf system is recorded by the Brønlund Fjord, Tavsens Iskappe and Ryder Gletscher Groups. The dolomites, limestones and subordinate siliciclastics of the Brønlund Fjord and Tavsens Iskappe Groups represent platform margin to deep outer shelf environments. These groups are recognised in three discrete outcrop belts - the southern, northern and eastern outcrop belts. In the southern outcrop belt, from Warming Land to south-east Peary Land, the Brønlund Fjord Group (Lower-Middle Cambrian) is subdivided into eight formations while the Tavsens Iskappe Group (Middle Cambrian - lowermost Ordovician) comprises six formations. In the northern outcrop belt, from northern Nyeboe Land to north-west Peary Land, the Brønlund Fjord Group consists of two formations both defined in the southern outcrop belt, whereas a single formation makes up the Tavsens Iskappe Group. In the eastern outcrop area, a highly faulted terrane in north-east Peary Land, a dolomite-sandstone succession is referred to two formations of the Brønlund Fjord Group. The Ryder Gletscher Group is a thick succession of shallow-water, platform interior carbonates and siliciclastics that extends throughout North Greenland and ranges in age from latest Early Cambrian to Middle Ordovician. The Cambrian portion of this group between Warming Land and south-west Peary Land is formally subdivided into four formations.


2014 ◽  
Vol 66 (2) ◽  
Author(s):  
Mohammadreza Fathi Kazerooni ◽  
Mohammad Saeed Seif

One of the phenomena restricting the tanker navigation in shallow waters is reduction of under keel clearance in the terms of sinkage and dynamic trim that is called squatting. According to the complexity of flow around ship hull, one of the best methods to predict the ship squat is experimental approach based on model tests in the towing tank. In this study model tests for tanker ship model had been held in the towing tank and squat of the model are measured and analyzed. Based on experimental results suitable formulae for prediction of these types of ship squat in fairways are obtained.


Sign in / Sign up

Export Citation Format

Share Document