Theoretical studies have shown that the generation of hydraulic fractures reduces or even reverses the stress anisotropy between the fractures and results in increasing the complexity of fractures. A finite element model was established in which the pore pressure element was used to simulate the behavior of porous media and the pore pressure cohesive element was adopted to catch the characters of hydraulic fracture. A special fracturing manner was adopted to create complicated fracture networks by reducing or even reversing the stress anisotropy between fractures. The geometries of hydraulic fractures, strains, stresses, pore pressure distributions and fluid pressures within the fractures are obtained. The results of the model are fit well with the corresponding theoretical data. The simulation results show that the stress anisotropy is reduced resulting from the generation of the hydraulic fracture, multiple parallel transverse fractures of horizontal well further reduce or even reverse the stress anisotropy in some place of the reservoir. The simulation results validate the feasibility of the theoretical studies and the expected complex network fractures could be created by adopting the special fracturing manner.
Natural gas massive hydraulic fracture research and advanced technology project. Quarterly report, August 1976--October 1976. [Fracture orientation determination]