The Use of Potential Fields in the Search for Potential Fields in the Faroe-Shetland Area

1998 ◽  
Vol 1 (05) ◽  
pp. 476-484 ◽  
Author(s):  
Richard Morgan ◽  
Colm Murphy
Keyword(s):  
Continental Margin ◽  
Seismic Data ◽  
Magnetic Data ◽  
3D Seismic ◽  
The North ◽  
Gravity And Magnetic ◽  
Basin Scale ◽  
The North Sea ◽  
Gravity And Magnetic Data ◽  
3D Seismic Data

This paper (SPE 51828) was revised for publication from paper SPE 38503, first presented at the 1997 SPE Offshore Europe Conference, Aberdeen, 9-12 September. Original manuscript received for review 9 September 1997. Revised manuscript received 6 July 1998. Paper peer approved 10 July 1998. Summary Fundamental geological and environmental differences exist between the basins of the North Sea and the basins of the northwest European continental margin, and strategies for success in the North Sea have not necessarily transferred directly to the continental margin. As a result, exploration outcomes to date have been somewhat disappointing, with one or two notable exceptions. Furthermore, a change in the approach to acreage evaluation places increasing levels of reliance on seismic data, specifically three-dimensional (3D) data, to tie down prospects before drilling. This approach focuses down rapidly to the prospect scale, and, although allowing detailed analysis of target structures, there is a risk of creating a gap in understanding between the geological processes observed at the basin scale and those at the prospect scale. A strategy to bridge this gap has drawn upon the wider family of geophysical data, namely gravity and magnetic data, in conjunction with a conventional, broad, regional grid of two-dimensional (2D) seismic data. These data have been worked together to construct a basin scale framework into which 3D seismic data acquisition can be planned and the results interpreted.At the regional scale, satellite-derived gravity coverage has enabled the removal of the effects of Tertiary seafloor spreading, allowing structures on the northwest European continental margin to be viewed in context with the geology of East Greenland.At the basin scale, basinal elements have been identified and correlated among seismic, gravity, and magnetic data. Controlling faults have been mapped, and the timing of basin formation inferred from trend and geometry, with implications for source rock distribution.At the license block scale, the segmentation of basin margins has been revealed by high spatial resolution magnetic data with implications for both trapping potential and the control of sediment supply into the basins. The fusion of interpretations made from the different types of geophysical data creates a scale of observation range that stretches from tectonic plates to prospective structures. The resulting geological framework has sufficient scale overlap to relate immediately to the level of detail available from 3D seismic data. Moreover, the broader perspective may ensure that those seismic data are acquired in the correct part of the basin in the first place. P. 476

Quaternary evolution of the northern North Sea

2020 ◽  
Author(s):  
Christine Batchelor ◽  
Dag Ottesen ◽  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Helge Løseth ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
3D Seismic ◽  
Quaternary Sediments ◽  
The North ◽  
The North Sea ◽  
Data Coverage ◽  
Northern North Sea ◽  
2D And 3D ◽  
3D Seismic Data

<p>The North Sea has arguably the most extensive geophysical data coverage of any glacier-influenced sedimentary regime on Earth, enabling detailed investigation of the thick (up to 1 km) sequence of Quaternary sediments that is preserved within the North Sea Basin. At the start of the Quaternary, the bathymetry of the northern North Sea was dominated by a deep depression that provided accommodation for sediment input from the Norwegian mainland and the East Shetland Platform. Here we use an extensive database of 2D and 3D seismic data to investigate the geological development of the northern North Sea through the Quaternary.</p><p>Three main sedimentary processes were dominant within the northern North Sea during the early Quaternary: 1) the delivery and associated basinward transfer of glacier-derived sediments from an ice mass centred over mainland Norway; 2) the delivery of fluvio-deltaic sediments from the East Shetland Platform; and 3) contourite deposition and the reworking of sediments by contour currents. The infilling of the North Sea Basin during the early Quaternary increased the width and reduced the water depth of the continental shelf, facilitating the initiation of the Norwegian Channel Ice Stream.</p>

Bright spots, milligals, and gammas

Geophysics ◽  
1982 ◽  
Vol 47 (12) ◽  
pp. 1693-1705
Author(s):  
Alan O. Ramo ◽  
James W. Bradley
Keyword(s):  
Seismic Data ◽  
Magnetic Data ◽  
Amplitude Analysis ◽  
Seismic Amplitude ◽  
The North ◽  
Gravity And Magnetic ◽  
Amplitude Anomaly ◽  
North Edge ◽  
Gravity And Magnetic Data ◽  
Seismic Anomaly

Spatially discontinuous high‐amplitude seismic reflections were encountered in seismic data acquired in the early 1970s in northeast Louisiana and southwest Arkansas. Large acoustic impedance contrasts are known to result from gaseous hydrocarbon accumulations. However, amplitude anomalies may also result from large density and velocity contrasts which are geologically unrelated to hydrocarbon entrapment. A well drilled on the northeast Louisiana amplitude anomaly encountered 300 ft of rhyolite at a depth of 6170 ft. Subsequent gravity and total field magnetic profiles across the feature revealed the presence of 0.2 mgal and 17 gamma anomalies, respectively. The measured magnetic susceptibility of the rhyolite was 0.0035 emu and the measured density contrast was [Formula: see text]. Model studies based on the seismically determined areal extent of the anomaly and the measured thickness of rhyolite accounted for the observed gravity and magnetic anomalies. The southwest Arkansas amplitude anomaly was a sheet‐like reflection which terminated to the north and west within the survey area. Two north‐south gravity profiles exhibited a negative character over the sheet‐like reflector but did not exhibit a clear spatial correlation with the north limit of the seismic anomaly. Two north‐south magnetic profiles exhibited tenuous 4 gamma anomalies which appeared to be spatially correlated with the interpreted north edge of the seismic anomaly. A subsequent wildcat well encountered no igneous material but did penetrate 200 ft of salt at about 7500 ft. Reassessment of the gravity and magnetic data indicated that this seismic amplitude anomaly is not attributable to an intrasedimentary igneous source; it suggested a salt‐related 0.2 to 0.3 mgal minimum coextensive with the observed seismic amplitude anomaly. Present amplitude analysis technology would treat these seismic data with suspicion. However, gravity and magnetic data acquisition can provide a relatively inexpensive means for evaluation and verification of amplitude anomalies and thus should be an adjunct for land seismic exploration utilizing amplitude analysis.

Mesozoic tectonostratigraphic evolution of the North Carnarvon Basin unlocked using regional 3D seismic

2016 ◽  
Vol 56 (2) ◽  
pp. 564
Author(s):  
Daniel Bishop ◽  
Megan Halbert ◽  
Katherine Welbourn ◽  
Ben Boterhoven ◽  
Stacey Mansfield ◽  
...  
Keyword(s):  
Seismic Data ◽  
Regional Scale ◽  
Depositional Environments ◽  
Single Channels ◽  
Data Sets ◽  
3D Seismic ◽  
The North ◽  
Basin Scale ◽  
3D Seismic Data ◽  
Carnarvon Basin

Interpretation of regional scale merged 3D seismic data sets covering the North Carnarvon Basin has for the first time enabled a detailed description of Mesozoic stratigraphic and structural features on a basin scale. Isoproportional slicing of the data enables direct interpretation of Triassic depositional environments, including contrasting low-stand and high-stand fluvial channel complexes, marginal marine clastic systems and reef complexes. Channels vary dramatically between sinuous-straight single channels within low net:gross floodplain successions, to broad channel belts within relatively high net:gross fluvial successions. The latter can be traced from the inboard part of the basin to the outer areas of the Exmouth Plateau. 3D visualisation and interpretation has demonstrated the huge variety of structural styles that are present, including basement-involved extensional faults, detached listric fault complexes, polygonal faults, and regional scale vertical strike-slip faults with flower structures. Fault trends include north–south, north–northeast to south–southwest, and northeast–southwest, with deformation events occurring mainly between the Rhaetian and Valanginian. Extensional and compressional deformation has created multiple horsts, three-way fault closures, fold belts and associated four-way anticlinal traps. Wrench tectonics may also explain pock-mark trains with the interpreted transfer of over-pressure from Triassic to Early Cretaceous levels. The use of regional scale merged 3D seismic data sets is now shedding light on tectonostratigraphic features on a basin scale that were previously unrecognised or enigmatic on 2D seismic or local 3D seismic data sets.

scholarly journals Delineation of shallow channel geometry and infill lithology using Spectral decomposition and seismic attributes: A case study from the North Sea Basin, Netherlands

2017 ◽  
Author(s):  
Kenneth Samuel Okiongbo ◽  
Righteous Ombu
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Spectral Decomposition ◽  
Negative Curvature ◽  
Seismic Facies ◽  
3D Seismic ◽  
Channel Geometry ◽  
The North ◽  
The North Sea ◽  
3D Seismic Data

Abstract. In the Southern North Sea, 3D seismic data had been widely acquired to explore for hydrocarbons, but interpretations of these datasets until now focus mainly on the deep exploration targets of the petroleum companies. Less attention is given to shallow sediments. But these sediments often contain channels that can serve as potential reservoir units. Thus the mapping and identification of these shallow channels and defining their infill lithology is important. In this study, seismic spectral decomposition technique has been used to delineate shallow thin channel geometry in a 3D seismic data acquired in the Dutch sector of the North Sea. The concurrent interpretation of curvature and coherence cubes with seismic facies analysis based on reflection terminations and geometry, amplitude and continuity enables the discrimination between shale versus sand filled channels. The results of the spectral decomposition show two distinct low sinuosity channel features in NNE–SSW direction but becomes diffuse towards the North. The strong negative curvature anomaly along the channels's axes observed in the most negative curvature attribute implies that the sediments within the channels have undergone more compaction. These strong negative curvature anomalies are interpreted to be due to differential compaction of shale filled channels.

Exploring mechanisms and rates of tunnel valley formation beneath deglaciating mid-latitude ice sheets using high-resolution 3D seismic data and numerical modelling

2021 ◽  
Author(s):  
James Kirkham ◽  
Kelly Hogan ◽  
Robert Larter ◽  
Ed Self ◽  
Ken Games ◽  
...  
Keyword(s):  
High Resolution ◽  
North Sea ◽  
Seismic Data ◽  
Ice Sheets ◽  
3D Seismic ◽  
Ice Dynamics ◽  
The North ◽  
The North Sea ◽  
State Water ◽  
3D Seismic Data

<p>The geological record of landforms produced beneath deglaciating ice sheets offers insights into otherwise inaccessible subglacial processes. Large subglacial channels formed by meltwater erosion of sediments (tunnel valleys) are widespread in formerly glaciated regions such as the North Sea. These features have the potential to inform basal melt rate parameterisations, realistic water routing and the interplay between basal hydrology and ice dynamics in numerical ice‑sheet models; however, the mechanisms and timescales over which tunnel valleys form remain poorly understood. Here, we present a series of modelling experiments, informed by geophysical observations from novel high-resolution 3D seismic data (6.25 m bin size, ~3.5 m vertical resolution), which test different hypotheses of tunnel valley formation and calculate the rates at which these features likely form beneath deglaciating ice sheets. Reconstructions of the former British-Irish and Fennoscandian ice sheets from a 3D thermomechanical ice‑sheet model (BRITICE CHRONO version 2) are used to calculate subglacial water routing and steady-state water discharges as these ice sheets retreated across the North Sea Basin during the last glaciation. Using these simulations, we calculate potential meltwater channel erosion rates and estimate how quickly tunnel  valleys are formed beneath deglaciating ice sheets in warmer than present-day climates. We find little evidence for widespread water ponding which may have led to channel formation through outburst floods. Instead, our results demonstrate that seasonal surface melt delivered to the bed could incise large channels of comparable dimensions to tunnel valleys over timescales of several hundred years as these ice sheets deglaciated.  </p>

Petroleum potential of the offshore southern Carnarvon Basin—insights from new Geoscience Australia data

2011 ◽  
Vol 51 (2) ◽  
pp. 746
Author(s):  
Irina Borissova ◽  
Gabriel Nelson
Keyword(s):  
Seismic Data ◽  
Source Rocks ◽  
Magnetic Data ◽  
Long Distance ◽  
Potential Field Data ◽  
Petroleum Potential ◽  
Gravity And Magnetic ◽  
Gravity And Magnetic Data ◽  
Insight Into ◽  
Carnarvon Basin

In 2008–9, under the Offshore Energy Security Program, Geoscience Australia (GA) acquired 650 km of seismic data, more than 3,000 km of gravity and magnetic data, and, dredge samples in the southern Carnarvon Basin. This area comprises the Paleozoic Bernier Platform and southern part of the Mesozoic Exmouth Sub-basin. The new seismic and potential field data provide a new insight into the structure and sediment thickness of the deepwater southernmost part of the Exmouth Sub-basin. Mesozoic depocentres correspond to a linear gravity low, in water depths between 1,000–2,000 m and contain between 2–3 sec (TWT) of sediments. They form a string of en-echelon northeast-southwest oriented depressions bounded by shallow-dipping faults. Seismic data indicates that these depocentres extend south to at least 24°S, where they become more shallow and overprinted by volcanics. Potential plays in this part of the Exmouth Sub-basin may include fluvio-deltaic Triassic sandstone and Lower–Middle Jurassic claystone source rocks sealed by the regional Early Cretaceous Muderong shale. On the adjoining Bernier Platform, minor oil shows in the Silurian and Devonian intervals at Pendock–1a indicate the presence of a Paleozoic petroleum system. Ordovician fluvio-deltaic sandstones sealed by the Silurian age marine shales, Devonian reef complexes and Miocene inversion anticlines are identified as potential plays. Long-distance migration may contribute to the formation of additional plays close to the boundary between the two provinces. With a range of both Mesozoic and Paleozoic plays, this under-explored region may have a significant hydrocarbon potential.

Extensive, Gas-charged Quaternary Sand Accumulations of the Northern North Sea and North Sea Fan

2020 ◽  
Author(s):  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Sunil Vadakkepuliyambatta ◽  
Stefan Buenz ◽  
Christine Batchelor ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Data Sets ◽  
3D Seismic ◽  
Fine Grained ◽  
The North ◽  
Northern North Sea ◽  
Well Data ◽  
Sea Fan ◽  
3D Seismic Data

<p>Sediments deposited by marine-based ice sheets are dominantly fine-grained glacial muds, which are commonly known for their sealing properties for migrating fluids. However, the Peon and Aviat hydrocarbon discoveries in the North Sea show that coarse-grained glacial sands can occur over large areas in formerly glaciated continental shelves. In this study, we use conventional and high-resolution 2D and 3D seismic data combined with well information to present new models for large-scale fluid accumulations within the shallow subsurface of the Norwegian Continental Shelf. The data include 48,000 km<sup>2</sup> of high-quality 3D seismic data and 150 km<sup>2</sup> of high-resolution P-Cable 3D seismic data, with a vertical resolution of 2 m and a horizontal resolution of 6 to 10 m in these data sets. We conducted horizon picking, gridding and attribute extractions as well as seismic geomorphological interpretation, and integrated the results obtained from the seismic interpretation with existing well data.</p><p>The thicknesses of the Quaternary deposits vary from hundreds of meters of subglacial till in the Northern North Sea to several kilometers of glacigenic sediments in the North Sea Fan. Gas-charged, sandy accumulations are characterized by phase-reserved reflections with anomalously high amplitudes in the seismic data as well as density and velocity decreases in the well data. Extensive (>10 km<sup>2</sup>) Quaternary sand accumulations within this package include (i) glacial sands in an ice-marginal outwash fan, sealed by stiff glacial tills deposited by repeated glaciations (the Peon discovery in the Northern North Sea), (ii) sandy channel-levee systems sealed by fine-grained mud within sequences of glacigenic debris flows, formed during shelf-edge glaciations, (iii) fine-grained glacimarine sands of contouritic origin sealed by gas hydrates, and (iv) remobilized oozes above large evacuation craters and sealed by megaslides and glacial muds. The development of the Fennoscandian Ice Sheet resulted in a rich variety of depositional environments with frequently changing types and patterns of glacial sedimentation. Extensive new 3D seismic data sets are crucial to correctly interpret glacial processes and to analyze the grain sizes of the related deposits. Furthermore, these data sets allow the identification of localized extensive fluid accumulations within the Quaternary succession and distinguish stratigraphic levels favorable for fluid accumulations from layers acting as fluid barriers.</p>

Diapiric shale and coast-perpendicular, fault-related subbasins, south Texas Gulf Coast

2015 ◽  
Vol 3 (2) ◽  
pp. T43-T56 ◽  
Author(s):  
Osareni C. Ogiesoba ◽  
Rodolfo Hernandez
Keyword(s):  
Seismic Data ◽  
Gulf Coast ◽  
Structural Features ◽  
South Texas ◽  
3D Seismic ◽  
Texas Gulf Coast ◽  
Vertical Loading ◽  
The North ◽  
Visualization Tools ◽  
3D Seismic Data

Coast-perpendicular shale ridges are rare structural features worldwide, and their origin remains a subject of debate. We studied some coast-perpendicular shale ridges and faults within a minibasin located onshore in Refugio County in the Texas Gulf Coast. We used 3D seismic data, visualization tools, and seismic attributes to examine the geometry of coast-perpendicular diapiric structures associated subbasins (SBs) and faults, and coast-parallel listric faults. Our results indicated that the minibasin is subdivided into four SBs by five diapiric shale ridges that intrude through the fault heaves of down-to-the-basin (synthetic) and coast-perpendicular faults. Three of the SBs are oriented perpendicular to the coast, whereas the fourth has a curvilinear form trending northeast–southwest–southeast. Of the five diapiric shale ridges, three are coast-perpendicular. The other two are curvilinear to the coast. All five diapiric shale ridges are associated with coast-perpendicular faults that bound the flanks of the ridges. On the basis of our mapping results, we deduced that the origin of the coast-perpendicular faults in the study area are related to the coalescing of en echelon synthetic faults, as well as the coalition of synthetic and antithetic fault planes. We inferred that the origin of the shale diapirs is related to vertical loading and, possibly, local southwest–northeast lateral compression of interbedded, overpressured, shale-prone intervals. The coast-perpendicular faults within the Frio formed as a result of reactivation of the Eocene-Vicksburg coast-perpendicular faults. Synthetic faults dominate the pattern within the SB in the north where shale ridges are broad, whereas antithetic faults dominate the pattern in the south where shale ridges are narrow.

scholarly journals The hidden sedimentary basin underneath the Quaternary volcanic unit in Bogor and Kendeng area

2021 ◽  
Vol 47 (2) ◽  
pp. 25-47
Author(s):  
Erlangga Septama ◽  
C. Prasetyadi ◽  
A Abdurrokhim ◽  
T. Setiawan ◽  
P.D. Wardaya ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Sediment Supply ◽  
Passive Margin ◽  
Magnetic Data ◽  
Rock Samples ◽  
Petroleum Systems ◽  
The North ◽  
Gravity And Magnetic ◽  
Gravity And Magnetic Data ◽  
East West

The Java Island is an active volcanic arc that experiences several volcanism episodes, which gradually changes from South to North from the Late Oligocene to Pleistocene, following the subduction of the Australian plates underneath the Eurasian plates. During the Eocene, the southern and northern part of Java was connected as one passive margin system with the sediment supply mainly comes from Sundaland in the north.  The compressional tectonics creates a flexural margin and a deep depression in the central axis of Java Island and acts as an ultimate deep-sea depocenter in the Neogene period. In contrast to the neighboring Northwest and Northeast Java Basins in the Northern edges of Java Island, the basin configuration in the East-West trending depression in median ranges of Java (from Bogor to Kendeng Troughs) are visually undetected by seismic due to the immense Quaternary volcanic eruption covers.Five focused window areas are selected for this study. A total of 1,893 Km sections, 584 rock samples, 1569 gravity and magnetic data, and 29 geochemical samples (rocks, oil, and gas samples) were acquired during the study. Geological fieldwork was focused on the stratigraphic unit composition and the observable features of deformation products from the outcrops. Due to the Paleogene deposit exposure scarcity in the Central-East Java area, the rock samples were also collected from the mud volcano ejected materials in the Sangiran Dome.The distinct subsurface configuration differences between Bogor and Kendeng Troughs are mainly in the tectonic basement involvement and the effect of the shortening on the formerly rift basin. Both Bogor and Kendeng Troughs are active petroleum systems that generate type II /III Kerogen typical of reduction zone organic material derived from transition to the shallow marine environment. The result suggests that these basins are secular from the neighboring basins with a native petroleum system specific to the palaeogeographical condition during the Paleogene to Neogene periods where the North Java systems (e.g., Northwest and Northeast Java Basin) was characterized by oxidized terrigenous type III Kerogen.

Sign in / Sign up

Export Citation Format

Share Document