scholarly journals Integrated Product, Process and Manufacturing System Development for Multifunctional Micromachine Tool

2022 ◽  
Author(s):  
Daniel Cortés ◽  
José Ramírez ◽  
Jorge Medina ◽  
Arturo Molina
Keyword(s):  
Design Process ◽  
Development Process ◽  
Manufacturing System ◽  
Positive Impact ◽  
Manufacturing Sector ◽  
System Development ◽  
Innovative Design ◽  
Reference Framework ◽  
Entrepreneurial Training ◽  
Engineering Projects

Abstract Novel practices in the formation of students are encouraged to be multidisciplinary which in fact, allows them to better understand the behaviour of systems. This skill allows them to identify existing needs that impact multiple areas, both for an organization and to complement their entrepreneurial training. In this work, there is exposed a reference framework that arose to aid in the innovative design process among the manufacturing sector, it seeks to stretch the gap between conceptualization and implementation for engineering projects. Furthermore, the formation of the learners is enriched due to the breakdown of complex systems into entities as it gathers existing knowledge and provides structure to systematize the development process, allocate problems and provide feedback. Thus, design stages are detailed, engineering stages are described, and a toolbox is presented to guide designers into their task. The methodology has been tested under multidisciplinary projects in different time lapses, observing a positive impact in the formation of participants, as it guarantees the inclusion of desired attributes, documentation and milestones in the scenario being developed. In this article, there are described three case studies. Findings when developing using the methodology shows a structural, documented process followed by the designers, capable of recognizing the abilities acquired and reinforced skills, documented entities corresponding to what is developed at the end of the projects and time of deployment is enhanced.

The Mechanical Drawing Distributed Synchronous Audit System Design for Product Development Process Based on Web

2012 ◽  
Vol 252 ◽  
pp. 339-342
Author(s):  
Xue Peng Liu ◽  
Dong Mei Zhao
Keyword(s):  
Product Development ◽  
Development Process ◽  
Manufacturing System ◽  
System Development ◽  
Product Development Process ◽  
Review System ◽  
Operation System ◽  
Audit System ◽  
Electronic Board ◽  
Discussion System

The mechanical drawing distributed synchronous audit system for product development process of manufacturing system based on WEB has an ability of real-time graphics discusses ability. It can also be used in the remote education difficult question answer discussion system. It is discussed that the whole design review system development language and electronic board choice, read the process, digital signatures, read serialization files, the client module and the client downloads. The final result of the operation system is obtained

Conceptual Model Driven Architecture to Support Global Product Development

2008 ◽  
Author(s):  
Javier Pereda ◽  
Mauricio Hincapie ◽  
Arturo Molina
Keyword(s):  
Product Development ◽  
Conceptual Model ◽  
Development Process ◽  
Manufacturing System ◽  
System Development ◽  
Development Project ◽  
Product Development Process ◽  
Model Driven Architecture ◽  
Model Driven ◽  
Product Development Project

For a rapid configuration of a given product development process, taking into account today unavoidable market’s requirements as is the integrated product, process and manufacturing system development considering their entire lifecycles, in this paper, an enterprise holistic framework, consisting in a three dimensional model, is described to support the model driven architecture (MDA) concept for global product development projects (GPDP). The holistic framework has been established based on the integration of three fundamental areas of research: concurrent engineering (CE), product lifecycle, and enterprise integration engineering (EIE). The integration of these three fields of knowledge, using a 3D holistic framework, generates a solid support for a model driven architecture. As a result, through a 3D matrix, more important elements of the product development process can be combined and modeled following their natural interactions through the project realization. Questions about a global product development project like: What needs to be developed? Who will develop it? Where will be developed? How will be developed? When is being developed? can be generated during the planning and execution of the project but, as part of this research effort, these questions are answered in an organized manner using the proposed enterprise holistic framework. The conceptual model (enterprise holistic framework) for the global product development project was established as a base to capture, store and configure a project including the integration of product, manufacturing process and manufacturing system development considering their entire lifecycles in the enterprise context.

A Workload Analysis for Strategic Conventional Standoff Capability Missions

1985 ◽  
Vol 29 (7) ◽  
pp. 635-639 ◽  
Author(s):  
Gilbert G. Kuperman ◽  
Harry G. Armstrong ◽  
Denise L. Wilson
Keyword(s):  
Conceptual Design ◽  
Design Process ◽  
Development Process ◽  
System Development ◽  
Weapon System ◽  
Design Validation ◽  
Workload Analysis ◽  
Assessment Technique ◽  
Final Design ◽  
Operator Workload

This paper presents the methodology and supporting rationale for the investigation of operator workload in the context of an enhancement to an existing weapon system. The methodology is applicable early in the conceptual design process and forms the baseline data from which final design validation may be developed. The Subjective Workload Assessment Technique (SWAT), used projectively, forms the kernel of the methodology. A strategy for building part-task through full-mission simulations, at increasing levels of face and content validity, is presented in the context of the weapon system development process.

Experience Design Applied to Research

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Andrea CAPRA ◽  
Ana BERGER ◽  
Daniela SZABLUK ◽  
Manuela OLIVEIRA
Keyword(s):  
Information Technology ◽  
Product Development ◽  
Design Process ◽  
Development Process ◽  
Product Development Process ◽  
Experience Design ◽  
Low Resolution ◽  
Design Concepts ◽  
Innovative Products ◽  
Technological Products

An accurate understanding of users' needs is essential for the development of innovative products. This article presents an exploratory method of user centered research in the context of the design process of technological products, conceived from the demands of a large information technology company. The method is oriented - but not restricted - to the initial stages of the product development process, and uses low-resolution prototypes and simulations of interactions, allowing users to imagine themselves in a future context through fictitious environments and scenarios in the ambit of ideation. The method is effective in identifying the requirements of the experience related to the product’s usage and allows rapid iteration on existing assumptions and greater exploration of design concepts that emerge throughout the investigation.

Impact of Determinants of Industrial Development on Employment and Wages in Indian Manufacturing

2020 ◽  
pp. 18-30
Keyword(s):  
Technical Efficiency ◽  
Total Factor Productivity ◽  
Technical Change ◽  
Positive Impact ◽  
Manufacturing Sector ◽  
Factor Productivity ◽  
Firm Level ◽  
Employment Level ◽  
The Impact ◽  
Level Performance

ABSTRACT The present study was undertaken to explore the evolution of the impact of firm-level performance on employment level and wages in the Indian organized manufacturing sector over the period 1989-90 to 2013-14. One of the major components of the economic reform package was the deregulation and de-licensing in the Indian organized manufacturing sector. The impact of firm-level performance on employment and wages were estimated for Indian organized manufacturing sector in major sub-sectors in India during the period from 1989-90 to 2013-14 of the various variables namely profitability ratio, total factor productivity change, technical change, technical efficiency, openness (export-import), investment intensity, raw material intensity and FECI in total factor productivity index, technical efficiency, and technical change. The study exhibited that all explanatory variables except profitability ratio and technical change cost had a positive impact on the employment level. Out of eight variables, four variables such as net of foreign equity capital, investment intensity, TFPCH, and technical efficiency change showed a positive impact on wages and salary ratio and rest of the four variables such as openness intensity, technology acquisition index, profitability ratio, and technical change had negative impact on wages and salary ratio. In this context, the profit ratio should be distributed as per the marginal rule of economics such as the marginal productivity of labour and capital.

scholarly journals Triple-Helix Structured Model Based on Problem-Knowledge-Solution Co-evolution for Innovative Product Design Process

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Qian Hui ◽  
Yan Li ◽  
Ye Tao ◽  
Hongwei Liu
Keyword(s):  
Product Design ◽  
Design Process ◽  
Design Problem ◽  
Triple Helix ◽  
Problem Solution ◽  
Innovative Product ◽  
Innovative Design ◽  
Structured Model ◽  
Knowledge Spaces ◽  
Product Design Process

AbstractA design problem with deficient information is generally described as wicked or ill-defined. The information insufficiency leaves designers with loose settings, free environments, and a lack of strict boundaries, which provides them with more opportunities to facilitate innovation. Therefore, to capture the opportunity behind the uncertainty of a design problem, this study models an innovative design as a composite solving process, where the problem is clarified and resolved from fuzziness to satisfying solutions by interplay among design problems, knowledge, and solutions. Additionally, a triple-helix structured model for the innovative product design process is proposed based on the co-evolution of the problem, solution, and knowledge spaces, to provide designers with a distinct design strategy and method for innovative design. The three spaces interact and co-evolve through iterative mappings, including problem structuring, knowledge expansion, and solution generation. The mappings carry the information processing and decision-making activities of the design, and create the path to satisfying solutions. Finally, a case study of a reactor coolant flow distribution device is presented to demonstrate the practicability of this model and the method for innovative product design.

scholarly journals PEER DESIGNERS AS STRONG INFLUENCERS ON THE DESIGN PROCESS OF FOOD STARTUPS

2021 ◽  
Vol 1 ◽  
pp. 2409-2418
Author(s):  
Summer D. Jung ◽  
Erika Perttunen ◽  
Senni Kirjavainen ◽  
Tua Björklund ◽  
Sohyeong Kim
Keyword(s):  
Design Process ◽  
Qualitative Data ◽  
Design Research ◽  
Positive Impact ◽  
Peer Influences ◽  
Design Team ◽  
Food And Beverage ◽  
Design Ideas ◽  
Different Sources ◽  
Positive Effect

AbstractAs design research expands its horizon, there has been a recent rise in studies on nontraditional designers. Previous studies have noted the positive effect of diversity in generating ideas. Among different sources of influence, peers outside the design team have been noted for their positive impact on the design process, yet the research on this topic is still in its early stages. Using qualitative data from 40 small and medium-sized enterprises (SMEs) in the American and Finnish food and beverage industries, the current study examines their interactions with other SMEs, shedding light on the influence of peers on creating new design solutions. The findings suggest that peer companies can act as a frequent and impactful source of inspiration for product design ideas. The most prevalent forms of interaction were co-creating products, sharing information, and sharing ingredients. Furthermore, the interactions were voluntary, organic, and improvisational in nature, and physical proximity or previous connections often initiated the interactions. Taken together, a great number of peer influences contributed towards creative new solutions.

Sign in / Sign up

Export Citation Format

Share Document